Elasco Lg3125-Ed Three-Channel Lite Guard End Set

Elasco Lg3125-ed Three-channel Lite Guard End Set

Product Code: eq23382
Availability: In Stock

$193.50 $238.00

Qty

7 reviews Write a review

Description
Reviews (7)

The tough and durable Elasco LG3125-ED Three-Channel Lite Guard End Setis designed to provide a smooth transition between the three-channel Lite Guard protector and the ground.

It is made from lightweight, solid-cast polyurethane, which offers the greatest strength & load-bearing characteristics in its class, a superior tolerance to greases and chemicals, and generates less noise than metal.

Built to withstand temperatures ranging from blizzards to heat waves, this end set features strong connection points for quick and safe installation, one male and one female end, and is made in the USA.

Three-Channel Design Compatible with LG3125 Guard For Pedestrian & Light Vehicle Traffic Made from Solid-Cast Polyurethane Slip-Resistant Surface Pattern Orange for Visibility Strong Connection Points Made in the USA

Parameters
Number of Channels	3
Channel Dimensions (W x H)	1.25 x 1.25" / 3.18 x 3.18 cm
Material	Solid-cast polyurethane
Load Capacity	N/A
Overall Dimensions (L x W x H)	4.25 x 13.00 x 1.50" / 10.80 x 33.02 x 3.81 cm
Weight	3 lb / 1.4 kg
Packaging Info
Package Weight	3 lb
Box Dimensions (LxWxH)	12.9 x 8.7 x 2"

3-channel end set for light-duty protection – compatible with LG3125 guard

Made from solid-cast polyurethane material – light, not biodegradable, superior tolerance to greases and chemical substances, offers the greatest strength and load-bearing characteristics in its class, generates less noise that metal

Slip-resistant surface pattern designed to minimize slips and falls

Orange color makes product easily noticeable to drivers and pedestrians

Strong connection points with easy and safe installation

Easily cleaned and resistant to the fiercest elements

Fully compliant with NEC, OSHA, REACH, RoHS

Made in the USA

Related Questions and Answers

Q: 1. Does it have a port where I can play my own music through it or is it pre loaded with it's own christmas music?

A: This is a dimmer pack, and does not have any pre-loaded music. It does have a small microphone so that it can be sound activated, and by using the dip switches you can change the pattern.

Q: 2. will these casters fit Bogen/Manfrotto 3082 light stand?

A: Yes, these casters will fit an older Bogen 3082 stand.

Q: 3. Is this closed cell foam? How much humidity does it retain/absorbs??Regards,

A: The foam for the Pelican 1751 Three-piece Foam Set is not closed cell foam, but rather composted of 1.3 polyurethane. Unfortunately, the manufacturer does not provide information regarding humidity retention, however, it is recommended to use desiccants in the case of storing items that may hold moisture within the case. Check out the SeaLife Moisture Muncher Desiccant 1.5 Gram: http://bhpho.to/1lZbUVE

Q: 4. What is the difference between the Lite and full license for Main Console?

A: The Lite version is required for the PC-Based Software, while the full license only works on the Main Console.

Q: 5. What are the costs of end caps for this model? Thanks!

A: We are sorry to say that Elasco does not offer end sets for any of the their Dropover systems. For End Sets you will need to look at their Cable Guard Products instead. For instance if you purchased the LG2125 Two-Channel Lite Guard Cable Protector then we have an end set for that. Here are links to both.https://bhpho.to/2NUHdV1https://bhpho.to/2LmC9qC

Q: 6. is this foam of the pick and pluck style?

A: No, you have to cut it.

Q: 7. Will these casters fit the Manfrotto 269HDBU Super High Aluminum Stand? https://www.bhphotovideo.com/c/product/325308-REG/Manfrotto_269HDBU_269HDBU_Super_High_Aluminum.html

A: The correct wheels for this stand are the Manfrotto 104G Braked Wheel Set for Cine Stands - 100mm Diameter B&H # MA104G. https://bhpho.to/2HtYO5n

Q: 8. Can these be used on a c-stand?

A: The legs on a C-Stand are 25mm in diameter so these would not fit. The C-Stands are not designed with casters of any kind in mind, so its not a good idea to attempt it. You will likely tip over. Your best bet is to use a roller stand.

Q: 9. I need to replace the middle foam section for 3 of my Pelican 1700 cases. Will this work? Or will at least 2 of the 3 work? I understand one is shorter than the other two. Thanks

A: Yes it will work . Th shorter one is on the bottom ..

Q: 10. Can this control 8 sequential DMX single address DMX fixtures for dimming only? In other words, faders 1-8 control DMX 1-8

A: If the fixtures only have only one channel-yes, the ikan Lite-Puter 8-Channel DMX Lighting Console can be used.

Matthew	05/09/2024
[12.9 x 8.7 x 2"] Covers all my cables in my studio. No one trips. Cables are protected. Things look a lot neater and tidier. I win with this purchase. 5

Doug	26/06/2024
[3 lb / 1.4 kg] I primarily do sound location recording for film. A producer recently gifted me with five of these Elasco single-channel cable drop overs. He rarely used them, but I immediately started using them on every shoot to guard my audio cables and stingers. They easily snap together to make as long a run as you need. I recently was on a gig where I needed more, so I ordered five additional identical Elasco single-channel cable drop overs. Greatest benefit is obviously protecting the integrity and longevity of my cables and stingers from crew members walking on them, standing on them, and rolling carts and gear over them. Safety wise, this is a great preventative measure from people tripping over any of my cables. I rarely need to gaff tape cables down anymore which is a major financial savings. Just be sure to get the right width and height to fit your cable needs. The ED1050 Single-Channel is sufficient for two to three audio cables or two 12-gauge stingers. If you use larger diameter cables or run bundles of cable together, I'd recommend bumping up another size or two, just beware that the larger you go in height and width, the weight of each drop over goes up as well. No question it raises your perceived professionalism a notch or two with clients. Don't know how I made it so long without these. Highly recommended. 5

Sherly	14/06/2024
[3 lb] Hi Ken,I use there UG5140 model - http://www.bhphotovideo.com/c/product/1125062-REG/elasco_guards_heavy_duty_5000_series.htmlLid has buttons build into the mold - don't think is any other product like this on the market.Lid stays closed perfectly. 5

Bill the Pilot	27/05/2024
[3 lb] This product is worth every penny... It closes better than any other we have owned before. It is also the strongest one I've seen. We used it at a jobsite where we had Wheel Loaders weighing in at about 150,000#s and they did not waiver one bit. I will definitely by more and recommend them to everyone if they want value for their dollar. 5

Dan	13/05/2024
[N/A] Make sure you push lip of lid under base and lid then stays down. If you don't seal lid, that's when you may have closure problems. Works great for me. 5

Satisfied Joe	14/04/2024
[3] Used for running single wire. Only fits up to 1 in size but company has larger size channels. Believe is designed to be stepped on which is not a problem at all, and even drive carts over it with ease. 5