Da-Lite 20878Elvn Motorized Screen 65 X 104"

Da-lite 20878elvn Motorized Screen 65 X 104"

Product Code: eq23463
Availability: In Stock

$3,767.22 $5,274.11

Qty

3 reviews Write a review

Description
Reviews (3)

The 220 V Da-Lite 20878ELVN Motorized Screen 65 x 104"from Da-Lite 20878ELVN Motorized Screen 65 x 104"is ceiling or wall-mountable, offering simple installation.

Low Voltage Control (LVC) Specify Veneer When Ordering Silent Motor 123" Diagonal / 16:10 Aspect Ratio High Contrast Matte White Surface 1.1 Gain / 100° Viewing Angle Includes 3-Button Wall Switch

Key Specs
Front/Rear Projection	Front
Aspect Ratio	16:10
Diagonal	123.0" / 312.4 cm
Gain	1.1
Tensioned	No
Type
Series	Contour Electrol
Front/Rear Projection	Front
Aspect Ratio	16:10
Style	Wall and Ceiling
Dimensions
Viewing Area	65.0 x 104.0" / 165.1 x 264.2 cm
Diagonal	123.0" / 312.4 cm
Surface
Gain	1.1
Viewing Angle	100 degrees
Masking	All Four Sides
Tensioned	No
Casing
Length	117.8" / 299.1 cm
General
Voltage	220 VAC/50 Hz

High Contrast Matte White is a fiberglass surface with a gray base for deeper reproductions of black, which improves contrast. It is for non-high-definition projection and environments with moderate ambient light. Cone: 100° Gain: 1.1

Related Questions and Answers

Q: 1. Hi!I have a Zoom H4N. I want to use it for the audio of my Youtube videos of me talking to the camera (never thought I would write something like that in my life...!)To do this, I need your help because I'm a total newbie at this ! So 2 questions :1) What king of connection cord do I need to connect my zoom machine with my DSLR (EOS 60D) ?2) I need a mic that let me be at a distance form my camera while I'm shooting. The same as the one tv announcers clipped to their jacket or blouse on the news. What kind do you suggest me under 150$Thank you so so much for your precious help :)

A: Q1 - I do not have an Zoom H4n but it appears a 3.5mm audio cable will work. Like this one: Sescom LN2MIC-ZOOMH4N - Line to Microphone Attenuation Cable for HDSLR Cameras.Q2 - Any lavalier (ex Polsen, countrymen) mic should work you can purchase them from about $23 and up

Q: 2. Is it an option to have both end pins a 1/4" female thread?

A: No, the Impact 3 Section Articulated Arm without Bracket only comes with a 1/4 female thread on one side and 3/8 inch thread on the other. There are adapters but it depends on what you are attaching to it. this is one adapter of many, https://bhpho.to/3PBdz9N.

Q: 3. How many lumens is this light?

A: Unfortunately, the manufacturer does not publish a lumens output for this LED panel.

Q: 4. What is the inner height of the box? In other words, how tall of an item can fit on the side (looking to stuff a couple of tripods in the side).

A: This case has the proper inner dimensions to house Two 60-65" Flat Screen Monitors. It is not designed to handle tripods. So that we may best assist you finding the proper product for your needs feel free to email us directly at askbh@bhphoto.com.

Q: 5. How would this compare to the equivalent manfrotto one as far as stability and durability?

A: Impact can take more payload and weighs less than the same Manfrotto version, however it could be said that the Manfrotto is built better or works smoother, your mileage may vary with that however. Stability/payload wise it seems Impact is the way to go.

Q: 6. Is arm length adjustable?

A: Yes by sliding the arms through the knuckles.

Q: 7. Is the 5/8" pin with the 3/8" female end a 16 thread?

A: Yes on one end it's 3/8 & the other end 1/4

Q: 8. What is the weight capacity when the arms are at maximum length horizontally?

A: The, Impact 2 Section Double Articulated Arm with Camera Bracket at full extension can support up to 11 lbs.

Q: 9. How long is this lens hood?

A: The Nikon HB-104 Lens Hood measures 5.5" long.

Q: 10. Please Confirm it is new not remanufactured and Canon brand?

A: This is new in a box original Canon toner.

Gab Laughin	21/09/2024
[1.1] We installed this in a rehabbed church space that's now a contemporary art gallery flush mounted it to an exposed beam and it looks and works great. That said, it's only been about a week, so maybe I'll report back later if I have any complaints! I was surprised that, for its length, there are only 2 mounting holes on either end, so I fear that it may sag over time. But again, too soon to tell. Where it does mount in those 2 places, it's on a solid plastic end cap/brace, so it seems like it will hold up well. It weighs about 85 pounds, so we had 3 people to install. We had to go about 17 feet up to the beam, we leveled, marked and pre-drilled & drove lag bolts into the beam and then used two extension ladders on either side to climb and carefully slide the projector up on the ladder's rails. Our 3rd person was on a 10ft ladder in the middle and was there as a spotter for extra support. It was then quite easy to hook it on to the lag bolts once we slid it to the top. All in all, it's an easy install, we opened the box and had the job done in less than 4 hours. Just be sure you have the wiring supplies and the proper mounting hardware and you'll have no problem! 5

Doug	09/05/2024
[100 degrees] Looking forward to getting all of this stuff together 5

Rikilah	12/04/2024
[1.1] This Screen was easy to install. It took 3 people and 2 ladders to get the job done. The remote is really not needed but i opted to install it as well. The motor runs really smooth. The screen is nice and wide. A really good buy. 5