Da-Lite 20879Elvn Motorized Screen 65"X104"

Da-lite 20879elvn Motorized Screen 65"x104"

Product Code: eq23466
Availability: In Stock

$3,767.22 $5,085.75

Qty

3 reviews Write a review

Description
Reviews (3)

The 220 V Da-Lite 20879ELVN Motorized Screen 65"x104"from Da-Lite 20879ELVN Motorized Screen 65"x104"is ceiling or wall-mountable, offering simple installation.

Low Voltage Control (LVC) Specify Veneer When Ordering Silent Motor 123" Diagonal / 16:10 Aspect Ratio Video Spectra 1.5 Surface 1.5 Gain / 70° Viewing Angle Includes 3-Button Wall Switch

Key Specs
Front/Rear Projection	Front
Aspect Ratio	16:10
Diagonal	123.0" / 312.4 cm
Gain	1.5
Tensioned	No
Type
Series	Contour Electrol
Front/Rear Projection	Front
Aspect Ratio	16:10
Style	Wall and Ceiling
Dimensions
Viewing Area	65.0 x 104.0" / 165.1 x 264.2 cm
Diagonal	123.0" / 312.4 cm
Surface
Gain	1.5
Viewing Angle	70 degrees
Masking	All Four Sides
Tensioned	No
Casing
Length	117.8" / 299.1 cm
General
Voltage	220 VAC/50 Hz

Video Spectra 1.5 is a fiberglass surface with a reflective coating for lower output non-high-definition projectors. It offers increased brightness with a reduced viewing angle. Suitable for uncontrolled ambient light. Cone: 70° Gain: 1.5

Related Questions and Answers

Q: 1. Which speedring do I need to fit this Broncolor Beautybox to a Dynalite Baja B4?

A: The Broncolor Speedring for Bowens Flash Systems B&H # BRSRBQ will fit the Dynalite Baja B4. Please see the image below for reference.

Q: 2. What is the inner height of the box? In other words, how tall of an item can fit on the side (looking to stuff a couple of tripods in the side).

A: This case has the proper inner dimensions to house Two 60-65" Flat Screen Monitors. It is not designed to handle tripods. So that we may best assist you finding the proper product for your needs feel free to email us directly at askbh@bhphoto.com.

Q: 3. What is the length when closed?

A: The Godox Parabolic Reflector (White, 65") is 43.5" closed.

Q: 4. what accessories are available for this; sock, grid, black or white diffusion?

A: Broncolor does produce a 40 degree grid for this item which is the Broncolor Light Grid 40-Degree for Beautybox 65 Softbox B&H # BRLGBB65.

Q: 5. hi is this umbrella will fit colbor cl60 65w led?

A: Thank you for your question, unfortunately the COLBOR CL60R RGB COB LED Monolight does not have an umbrella mount, however your can use Bowen-S mount Soft-boxes like https://www.bhphotovideo.com/c/product/1736570-REG/colbor_colbor_bp90_quick_setup_parabolic_softbox_with.html https://www.bhphotovideo.com/c/product/1342036-REG/godox_sb_nbm_octa140_sb_nbm_octa_140cm_softbox.html Or you can also look at https://www.bhphotovideo.com/c/product/1785042-REG/colbor_cl220r_220w_rgb_cob_led.html that does have an umbrella mount.

Q: 6. Does the shaft fit the Godox AD 300 Pro umbrella slot?

A: The Godox Parabolic Reflector (White, 65") can fit an AD300Pro.

Q: 7. Will this fit for Glow Glow Easy Lock 65" Translucent Umbrella??

A: This diffuser has not been tested with the Glow Easy Lock 65" umbrella to our knowledge.

Q: 8. Is this compatible with Sharp PNUH601 ?

A: Yes it should be. This product is compatible with screens between 55-65 inches. The PNUH601 is a 60 screen and within the size capacity of this case.

Q: 9. Can I use the Impact Speedring for the Beautybox?

A: Yes, you may use Impact speedrings designed for use with octaboxes with the Broncolor Beautybox 65 Softbox (26 ).

Q: 10. Will this work on a regular umbrella or just parabolic type?

A: Yes, the Godox Diffuser for 33.5" Parabolic Umbrella will work with regular umbrella's of the same size.

Zack	12/09/2024
[1.5] I installed in my living room in between ceiling joists. It works great. I use it with a Panasonic HD projector. It impresses everyone who walks in the room. Has a clean appearance when retracted. Note: it didn't come with a 12v trigger as both the B&H customer service rep and myself thought it did. We both misunderstood the description (it's optional.) The part was available at Da-Lite for $80 and came with no instructions. I got it to work after a few emails and chats with da-lite. Also, I ended up placing some holes in the top of the case to mount using 8 Lag bolts into the 2nd story floor structure. All the hardware that comes with it assumes you will have access to hang it from the top which requires access via the side while it's in it's final position. I was putting it in a hole the size of the case in my finished ceiling so that method would not work ( I would have had to remove and re-install a lot of drywall). I knew this before I purchased by reading the installation instructions so no worries just a fact and maybe a consideration for future changes to the case or just the directions. 5

Chip	08/04/2024
[1.5] We use the screen in our church sanctuary once or twice a month. Installing it was an adventure with the weight and length, but several sections of scaffolding and a couple friends made the install move along nicely. The instructions for wiring were right on and it worked first try! The image is right on and visible the entire length of our viewing area (over 100'). 5

Gab Laughin	30/11/-0001
[70 degrees] We installed this in a rehabbed church space that's now a contemporary art gallery flush mounted it to an exposed beam and it looks and works great. That said, it's only been about a week, so maybe I'll report back later if I have any complaints! I was surprised that, for its length, there are only 2 mounting holes on either end, so I fear that it may sag over time. But again, too soon to tell. Where it does mount in those 2 places, it's on a solid plastic end cap/brace, so it seems like it will hold up well. It weighs about 85 pounds, so we had 3 people to install. We had to go about 17 feet up to the beam, we leveled, marked and pre-drilled & drove lag bolts into the beam and then used two extension ladders on either side to climb and carefully slide the projection screen/case up on the ladder's rails. Our 3rd person was on a 10ft ladder in the middle and was there as a spotter for extra support. It was then quite easy to hook it on to the lag bolts once we slid it to the top. All in all, it's an easy install, we opened the box and had the job done in less than 4 hours. Just be sure you have the wiring supplies and the proper mounting hardware and you'll have no problem! 5