Qsc Ac-C6T 6" 2-Way Ceiling Loudspeaker Pair

Qsc Ac-c6t 6" 2-way Ceiling Loudspeaker Pair

Product Code: eq23626
Availability: In Stock

$810.00 $1,223.10

Qty

17 reviews Write a review

Description
Reviews (17)

The white AcousticCoverage Series QSC AC-C6T 6" 2-Way Ceiling Loudspeaker Pairis a pair of transformer-equipped 6" ceiling loudspeakers voiced to deliver enhanced clarity in the vocal range, making them suitable for 70/100V or 8-ohm operation in a variety of paging, A/V conferencing, and background music applications.

Outfitted with a 6" polypropylene woofer and a coaxially mounted 0.86" silk dome tweeter in a blind mount assembly with a ported baffle, the AC-C6T offers broad 110° conical coverage while providing a frequency range of 65 Hz to 20 kHz (-10 dB). The speaker is capable of handling 30W RMS and producing a peak maximum SPL of 110 dB.

The AC-C6T utilizes a 4-pole Euroblock connector under a swivel plate for easy input and loop-thru wiring. Mounting hardware is included for simplified in-ceiling installation.

Open Box Products Have a Limited 3-Year Manufacturer Warranty 6" Woofer and 0.86" Silk Dome Tweeter 30W RMS Power Handling 110° Conical Coverage 110 dB Peak Maximum SPL 65 Hz to 20 kHz Frequency Range Low-Saturation Multi-Tap Transformer Supports 70V, 100V, or 8-Ohm Operation Euroblock Connector for Easy Wiring Includes Ceiling Mounting Hardware

Key Specs
Active/Passive	Passive
Number of Included Speakers	2
Speaker Configuration	2-Way
Power Handling	30 W RMS
Constant Voltage / Transformer Taps	70 V: 30 / 15 / 7.5 / 3.7 / 1.9 W or 8 Ohms Bypass 100 V: 30 / 15 / 7.5 / 3.8 W or 8 Ohms Bypass
Impedance	8 Ohms (Transformer Bypassed)
HF Driver	1x 0.86" / 2.18 cm Silk Dome Tweeter
LF Driver	1x 6" / 15.24 cm Polypropylene Woofer
Frequency Range	65 Hz to 20 kHz -10 dB
Color	White
Speaker
Active/Passive	Passive
Number of Included Speakers	2
Speaker Configuration	2-Way
Power Handling	30 W RMS
Constant Voltage / Transformer Taps	70 V: 30 / 15 / 7.5 / 3.7 / 1.9 W or 8 Ohms Bypass 100 V: 30 / 15 / 7.5 / 3.8 W or 8 Ohms Bypass
Impedance	8 Ohms (Transformer Bypassed)
Transformer Wattage	30 W
Enclosure Type	Bass-Reflex
Shielded	No
Drivers
HF Driver	1x 0.86" / 2.18 cm Silk Dome Tweeter
LF Driver	1x 6" / 15.24 cm Polypropylene Woofer
Performance
Frequency Range	65 Hz to 20 kHz -10 dB
Maximum SPL	104 dB (Continuous) 110 dB (Peak)
Sensitivity	89 dB (Half-Space)
Coverage Angle	110° (Conical)
Maximum Input Voltage	15.5 V RMS
Connectivity
Inputs/Outputs	1x Block 4-Pole Speaker Input/Thru (Removable)
Maximum Wire Gauge	18 AWG
Physical
Certifications	UL
Environmental Resistance	No
Color	White
Mounting	In-Ceiling
Cutout Size	9 x 9" / 22.9 x 22.9 cm
Mount Surface Thickness	0.3 to 1.5" / 6.4 to 38.1 mm
Construction Material	ABS, Metal Grille, Steel
Dimensions	10.24 x 8.4" / 26.01 x 21.34 cm
Weight	7.6 lb / 3.4 kg
Packaging Info
Package Weight	20.8 lb
Box Dimensions (LxWxH)	24.3 x 12.8 x 12.5"

High-quality transducers provide increased clarity through the critical voice range and improved musicality often not seen in typical BGM-class products

6" polypropylene cone transducer with butyl rubber surround and sensitivity-matched, coaxially mounted 0.86" silk dome tweeter

110° of conical coverage reduces the number of loudspeakers required for even coverage in low-ceiling applications

Easy-to-install blind mount assembly features a ported baffle which optimally tunes the galvanized steel back can and allows low-frequency extension down to 65 Hz (-10 dB)

Low-saturation, low-loss 70/100V transformer with 8-ohm bypass

Rotary tap-selector switch accessible under the painted steel grille

4-pole Euroblock connector with loop-thru wiring located under a quick-access swivel plate for easy system wiring

Advanced voicing filter sets using QSC Intrinsic Correction are available through either Q-Sys processing or CXD amplifier platforms (available separately)

White (RAL 9010) finish with UV inhibitors to prevent discoloration over time

Related Questions and Answers

Q: 1. CAN IB YPASS TRANSFORMER AND USE OF HI FI AMP SPEAKER TURMINALS?

A: No - the taps cannot be bypassed. These speakers are not designed for home stereo or receiver use:Transformer Taps: 70V: 30W, 15W, 7.5W & 3.7W taps100V: 30W, 15W, & 7.5W taps

Q: 2. Looking for purchase the cover. Consist of the following logo, screen, and rubber. Or may be a complete cover? thanks.

A: available only from JBL direct ()

Q: 3. Is shipping free to Hawaii?

A: I am sorry it would not be free shipping to Hawaii, This item is eligible for free expedited shipping in the contiguous (lower 48) United States. Expedited shipping should arrive in 1-3 business days, depending on your location. Expedited Delivery not available to PO Boxes.

Q: 4. Does this item include the rough in kit or bracket for ceiling support?

A: This will include the c-ring and tile rails.

Q: 5. Will 12 AWG speaker wire fit into the rear inputs? I have 60' run to the receiver hence the thicker gauge.

A: Yes you might have twist bare cables a few times but should fit.

Q: 6. does this speaker have an individual volume control?

A: Do I hook up 110 power from a outlet to this

Q: 7. Altavoces CCM683 es posible instalarlos en automvil Volvo S90?

A: The Bowers & Wilkins CCM683 8" 2-Way In-Ceiling Speakers (Pair) BH #BOCCM683 are made for in-ceiling use. They are not made to fit or work in a car.

Q: 8. Are these speakers weather resistant? For outdoor?

A: No they are not weather resistant. Enclosure Characteristics: Ingress Protection: IP-44 Operating environment: Designed for indoor use Operating Temperature: -4 to 122°F (-20 to 50°C)

Q: 9. Is this price for a pair or single? JBL ships in pairs

A: The JBL Control 45C/T is sold individually. This item includes a single speaker with mounting hardware.

Q: 10. Is this sold as a Pair of speakers or is it only 1 speaker?

A: It is sold as a single speaker.

Christopher	28/09/2024
[30 W RMS ] This kit has great templates and instructions. I will share that the maximum capacity of the mounting clamps is 1 and 1/4 inches making that the thickest material these will mount into. These sound wonderful! The tweeter stalks are aimable to provide direction to the sound field which is handy for my ceiling mount application. I guess I'm happy! 5

Pete	17/09/2024
[30 W RMS ] I've had a pair of these for a few years now. They work very well as stage monitors. I use mine primarily as a monitor for my keyboards when performing. There is a multi-position switch that changes the EQ depending on the listening mode, but I usually leave it in Stage Monitor mode. Inputs are combination XLR / 1/4 TRS jacks. However, the daisy-chain connection to another monitor is XLR only - not 1/4 TRS, which is a pain in the neck sometimes. And the volume setting on the first monitor determines the maximum volume setting on any daisy-chained monitors. Overall, a very rugged monitor that has been dropped a few times and taken its share of abuse, but has never failed me. And it's a lot smaller and lighter than comparable stage wedges. To make sure I never lose the power cord, I have caribiners on the handle and the AC cord that I just snap together when transporting it. B&H occasionally has sales on these and also bundles (stand and XLR cable) - jump on those sales when available! 5

Dave C.	14/09/2024
[2] I made a lot of comparisons on in wall speakers and for the money and performance against other speakers in the stores the POLK speakers were the best deal. After installing them in my home I was sure my decision was the correct one. I couldn't be happier. 5

Steve Fowler	29/08/2024
[20.8 lb] A simple joy to install, they look fantastic, and sound VERY good for the size and price. 5

Nathan	25/08/2024
[Bass-Reflex] We are very happy with our AD-S6Ts. They sound great and have good coverage while also not looking like an eyesore. Highly recommend! 5

Scott again	25/08/2024
[Bass-Reflex] I first reviewed these speakers five years ago, and gave them 5 stars for their excellent sound quality. After moving to a new house I bought these speakers again to be installed in the ceiling and used for rear surround. My review is unchanged. These are great speakers, very high quality, and easy to install. They really sound great, as rear speakers or as the main speakers. I'm amazed at how good they sound. 5

anyonymous	19/08/2024
[15.5 V RMS] Love the install and sound. Hope I win $1000... 5

Sergey	03/08/2024
[15.5 V RMS] At home stereo set up, wanted to try new tech, noticed local rental joints are exclusively QSC (no passive speakers though). Ordered smallest QSC speakers - I liked their look for home and their 85 degree pattern; with the idea to return them if I don't like the sound . I employ them with a 200W Mackie amp and SVS-SB3000 sub, through a DDRC-24 Dirac Live room corrector. The result is very pleasing, and the Tannoys are now retired. There is more clarity in the sound and I can push more (a lot of) power into the system with the clarity still remaining there. I don't have to sit on the sofa to enjoy the sound, so 85 degree pattern is working well. Note they are not flat, they require EQ/DSP corrector. 5

Spencer	12/07/2024
[Passive] These speakers sound great! Right out if the box. They work every time and every where I need them. 5

Ken	07/07/2024
[White] These protect the speakers very well. In the past I had no covers and the speakers would get beat up and look like they just came off a international road show. These covers/Totes keep them looking new...I like them very much. 5