Cinemilled Quick-Switch Mount Plate For Ronin

Cinemilled Quick-switch Mount Plate For Ronin

Product Code: eq23789
Availability: In Stock

$449.97 $679.45

Qty

20 reviews Write a review

Description
Reviews (20)

Quickly swap your camera between the Ronin and other support gear with the CineMilled Quick-Switch Mount Plate for Roninfrom CineMilled. The point of this plate is not only to let you easily swap back and forth but to also allow you to keep the camera fully built up the Ronin's factory dovetail the whole time, with transmitters, handles, or other gear attached.

The Quick-Switch Plate is designed to accept the Ronin dovetail plate on top and your tripod plate on the bottom. A safety stop on the top keeps the Ronin dovetail securely in place. Screws on the side tighten everything in place at the end, and the screws don't fully come off, so you don't have to worry about having to put them away. Screws are used instead of kip handles in order not to interfere with different-sized plates, etc.

Quickly Swap Between Ronin & Other Gear Insert Dovetail on Top with Safety Stop Attach Tripod Plate on the Bottom Keep Camera Fully Built Up on Dovetail

Parameters
Material	Aluminum, anodized black
Dimensions	3.1 x 2.5 x 0.8" (7.9 x 6.4 x 2 cm)
Weight	7.9 oz (224 g)
Packaging Info
Package Weight	0.55 lb
Box Dimensions (LxWxH)	5.5 x 3.1 x 1.3"

Related Questions and Answers

Q: 1. Does this work with the Ronin-MX as well?

A: Just got off the phone with DJI. Guy on the line successfully attached the same handlebars to both the Ronin M and MX. He also said they are identical. So I'd say yes, it'll work. Placing my order today. Will do my best to come back and tell u how it went!

Q: 2. Will this work with the original Ronin?

A: It does not. This is for the Ronin-M. It will not work with the original Ronin.

Q: 3. Will this work with the Glide Gear DNA 6000 arm and vest?

A: This combination is unknown but it should work with any 7/8 post. The Glide Gear DNA 6000 is reported to be 7/8 so you should be good.

Q: 4. Do you have an estimate on when these units from Cinemilled might be arriving? I'm from Canada, so the pre-ordering process doesn't work as well for me based on shipping prices. Thanks in advance!

A: Sorry, but we do not have a date of arrival for these units. Hopefully soon.

Q: 5. Hi I have a Tiffen master series arm and Djı ronin 2 Which size should I take?

A: From what I can gather, this unit will not fit a master series arm.

Q: 6. does this plate work with the came tv stabilizer? https://a href= http://www.bhphotovideo.com/c/product/1148838-REG/came_tv_lbv_l4a_lbs1_pro_camera_video_carbon.html target= _blank www.bhphotovideo.com/c/product/1148838-REG/came_tv_lbv_l4a_lbs1_pro_camera_video_carbon.html/a

A: No, this is made specifically for the Ronin dovetail.

Q: 7. Just wondering if there are any products similar to this? Allowing to mount a ronin 1 dovetail on top and a tripod baseplate on the bottom.

A: RigWheels make a Ronin Mounting Adapter Plate as well, B&H # RIRAMP. https://bhpho.to/2PUsnyw

Q: 8. So I want to fly my Sony fs700 on a Dji Ronin. Would this allow me enough wiggle room to operate efficiently or would I need additional parts?

A: You will be good with these two parts. If you were to add equipment to the back of the camera, say a battery, you would also need the CineMilled Pan Arm Extension for DJI Ronin Gen. 2 (Short) B&H # CICM502 or possibly the Long version. CineMilled Pan Arm Extension for DJI Ronin Gen. 2 (Long) B&H # CICM503 But if you are using just the FS700 and nothing on the back, the two extensions will be just fine.

Q: 9. Which lower plate is comparable with it ? I need lower plate to mount it on manfrotto plate

A: This is the lower plate for DJI RS gimbals that is Manfrotto compatible. DJI R Quick Release Plate for RS 2 & RSC 2 (Lower) BH #DJRQRPLOW • MFR #CP.RN.00000119.01 https://bhpho.to/3cF41Jw

Q: 10. Will the Ronin still fit in the standard case once these are installed?

A: yes it will

Lawrence	27/09/2024
[7.9 oz (224 g)] Solid replacement for the original DJI part that often breaks. A little heavier but worth the extra weight and cost. Ships with replacement bolts as well. 5

Francisco	21/09/2024
[7.9 oz (224 g)] I've used this product to mount the Ronin onto a large multirotor copter and it worked great. The adapter plate can mount the Ronin on pretty much anything you need. Once the Ronin is attached, you can tell that it is safe and secure. The plate feels like it's made out of high quality material. Simply mount it and you are good to go 5

anyonymous	16/09/2024
[7.9 oz (224 g)] Great product to mount you Ronin-M on tripod or custom mounts on cars. love it 5

Jared Hail	18/08/2024
[7.9 oz (224 g)] I use this mount to rig my Ronin to car mounts, jibs, and DIY mounts for helicopters. Strong build and milled will precision. Seems a little pricy for a chunk of metal, but its easily paid itself off in just one use. I Highly recommend all Ronin owners to add this to your gear list. 5

Desiree S.	14/07/2024
[0.55 lb] A solid piece of metal that keeps my Ronin-M securely in place on my 7 foot crane without any issues. It fits the Ronin-M like a glove!Beautifully done! It is a little pricey, but worth every penny! And B&H was fast at shipping it to me. It arrived in perfect timing for my shoot. 5

Brant	14/07/2024
[7.9 oz (224 g)] They are quick to install and hold my Ursa Mini without issue. Product was delivered quickly. 5

Steadishot	14/07/2024
[7.9 oz (224 g)] This is the most versatile $ I ever spent.... this allowed me to use my ronin is so many more ways. On my jib on a car mount....I even tried the rope cable cam and it worked great. 5

Ryan	26/06/2024
[0.55 lb] It's ok 5

Brett	13/06/2024
[7.9 oz (224 g)] Well made, and adapts to my steadican flyer. 5

Matt S	12/06/2024
[7.9 oz (224 g)] With the ronin M I now get cinematic tripod pans with smoothness and deadband up. Nice slow stops, production value raised!!! Can't wait to get this bad boy on a crane. 5