Designed to hold two bows or a bow/ rifle in a bunk-bed style storage system SKB 5014 iSeries Double Bow Case - 50" Blackfeatures a rigid foam divider to form two separate compartments. It will provide stable positioning for instruments, and convoluted foam in the lid adds extra cushioning and stability. This case is built to Mil Spec standards including MIL-C-4150J: waterproof and dust tight; MIL-STD-810FA: resistance to UV, solvents, corrosion, fungus; and MIL-STD-810F: resistance to impact damage. A MIL-STD-648C automatic pressure equalization valve maintains the case's water and dustproof rating while equalizing the interior pressure to the ambient outside pressure to make it easier to open the case after commercial air travel.

The injection-molded case is constructed of polypropylene copolymer resin and is IP67-rated dust and waterpoof, and submersible. It features molded-in hinges, stainless-steel hinge pins, four trigger-release latches, and four reinforced padlock locations. Three comfortable rubber over-molded cushion grip handles snap into vertical/horizontal position for convenient carrying, and to aid transporting it has in-line skate-style wheels. Multiple cases stack securely for easy and efficient storage. SKB is proud to say that this case is made in the USA.

Holds Two Bows or a Bow and a Rifle    Polypropylene Copolymer Resin Case    Foam Lined Interior with Foam Divider    Dust & Waterproof, Submersible    UV, Solvent, Corrosion, Fungus Resistant    Automatic Pressure Equalization Valve    Four Latches and Lock Locations    Three Handles with Wheels for Transport    Made in the USA

• Designed to stack two bows or a bow and a rifle
• Convoluted egg-crate interior foam lining
• Rigid convoluted foam divider

• Three patented snap-down rubber over-molded cushion grip handles for comfortable lifting and carrying
• In-line skate-style wheels for easy transport

• Injection molded high-strength polypropylene copolymer resin
• IP67-rated: dustproof, waterproof, submersible
• MIL-C-4150J: waterproof and dust tight
• MIL-STD-810FA: resistance to UV, solvents, corrosion, fungus
• and MIL-STD-810F: resistance to impact damage
• MIL-STD-648C automatic pressure equalization valve
• Four trigger-release latches
• Four padlock holes with stainless-steel protector clips
• Molded-in hinges with stainless-steel hinge pins
• Made in the USA

Related Questions and Answers

Q: 1. Will the case hold 2 long stabilizers and 4 short stabilizers?

A: The SKB iSeries Double Recurve Bow Case can hold a stabilizer up to 38” long. The pocket for the stabilizer is not sized for multiple stabilizers.

Q: 2. could a 49.75in keyboard be safely fitted in this one?

A: The SKB 3i-5014-TKBD iSeries 76-Note Keyboard Case has an interior length of 47.5 inches and would not safely accommodate a keyboard measuring 49.75 inches.

Q: 3. what are the internal dimensions?

A: Hello Martin The Interior Dimensions of the 2SKB-SC4117 are 39.00" L x 15.00" W x 5.00" D

Q: 4. What size risers can fit in the cutouts for the recurve risers?

A: The SKB iSeries Double Recurve Bow Case can accommodate 2 risers up to 25” long.

Q: 5. Will the skb 4214 fit a Prime Centergy Hybrid ?

A: Hi Darrin, Yes, the Prime Centergy Hybrid should fit, but please measure your bow with the accessories you intend to leave on and compare with our interior dimensions.Thank you,Will

Q: 6. Will this fit the Phase 4 33..

A: The SKB iSeries 4214 Medium Parallel Limb Bow Case (Desert Tan) will not hold the Mathews Phase4 33 bow.

Q: 7. will the skb I series 3614 bow case fit the new hoyt carbon defient 31 in. axle toaxle ?

A: I would recommend the SKB I Series 4214 Small. The Interior Dimensions are 35.0 x 14.0 x 5.0 which will fit your bow with an Axle to Axle of 31.

Q: 8. I see that the Interior length is 40 inches is this the cut out size? Can it be cut to 43in.

A: The insides of the SKB iSeries 4214 Medium Parallel Limb Bow Case is 42.5 inches without the foam. So it is not recommended for a 43 inch bow. This one could be used instead: https://bhpho.to/2N8K1xN

Q: 9. Does this come pre cut with spaces for your quiver and 2 storage boxes? Is there anything to soak moisture from inside the case?

A: The iSeries Medium Parallel Limb Bow Case fits parallel limb bows up to 40" long with separate quiver, 12 arrows, and accessory box compartments (sold separately – Part# 3i-0702-1B). Please take a look at the following link: https://bhpho.to/40pbqRX. To keep a case dry inside you could use this desiccant pack: https://bhpho.to/46G4rGr

Q: 10. Is this TSA approved?

A: Since there are no internal lock TSA approvals is not necessary You would need to use an approved TSA pad lock. Ruggard 3-Dial TSA Combination Lock BH #RUTPLZ3CG • MFR #TPL-Z3CG https://www.bhphotovideo.com/c/product/1022674-REG/ruggard_tpl_z3cg_3_dial_tsa_combination_lock.html