Designed to hold two wider parallel limb bows like the Mathews Z7 Series or a bow/rifle in a bunk-bed style storage system, SKB 4217 iSeries Double Bow Case in Blackfeatures a rigid foam divider to form two separate compartments.  It provides stable positioning for instruments, and convoluted foam in the lid adds extra cushioning and stability. This case is built to MIL Spec standards including MIL-C-4150J: waterproof and dust tight; MIL-STD-810FA: resistance to UV, solvents, corrosion, fungus; and MIL-STD-810F: resistance to impact damage. The MIL-STD-648C automatic pressure equalization valve maintains the case's water and dustproof rating while equalizing the interior pressure to the ambient outside pressure to make it easier to open the case after commercial air travel.

The injection molded case is constructed of polypropylene copolymer resin and is IP67-rated dust and waterpoof, and submersible. It features molded-in hinges, stainless-steel hinge pins, six patented trigger-release latches, and six reinforced padlock locations. Three comfortable rubber over-molded cushion grip handles snap into vertical/horizontal position for convenient carrying, and to aid transporting are in-line skate style wheels. Multiple cases stack securely for easier and efficient storage. SKB is proud to say that this case is made in the USA.

Holds Two Bows or a Bow and a Rifle    Polypropylene Copolymer Resin Case    Foam Lined Interior with Foam Divider    Dust & Waterproof, Submersible    UV, Solvent, Corrosion, Fungus Resistant    Automatic Pressure Equalization Valve    Six Latches and Lock Locations    Three Handles with Wheels for Transport    Made in the USA

• 40x16x6.5" dimensions
• Designed to stack two wider parallel limb bows, like the Mathews Z7 Series, or a bow and a rifle
• Convoluted egg-crate interior foam lining
• Rigid convoluted foam divider

• Three snap-down rubber over-molded cushion grip handle for comfortable lifting and carrying
• In-line skate style wheels for easy transport

• Injection molded high-strength polypropylene copolymer resin
• IP67-rated: dustproof, waterproof, submersible
• MIL-C-4150J: waterproof and dust tight
• MIL-STD-810FA: resistance to UV, solvents, corrosion, fungus
• and MIL-STD-810F: resistance to impact damage
• MIL-STD-648C automatic pressure equalization valve
• Six patented trigger-release latches
• Six padlock holes with stainless steel protector clips
• Molded-in hinges with stainless-steel hinge pins
• Made in the USA

Related Questions and Answers

Q: 1. How much room does the think tank liner take up? Would the Matthews Dutti Dolly fit?

A: This has interior dimensions of 24.1 x 21 x 7". The Dutti Dolly is 20 x 24 x 3.5" / 50.8 x 60.96 x 8.89 cm (To Top of Wheel Guards). It will be a tight fit, but it should work.

Q: 2. I see that the Interior length is 40 inches is this the cut out size? Can it be cut to 43in.

A: The insides of the SKB iSeries 4214 Medium Parallel Limb Bow Case is 42.5 inches without the foam. So it is not recommended for a 43 inch bow. This one could be used instead: https://bhpho.to/2N8K1xN

Q: 3. Will the MacBook Pro 16" fit in the laptop sleeve?

A: The item description states that only a 15" laptop will fit in the sleeve.

Q: 4. What size risers can fit in the cutouts for the recurve risers?

A: The SKB iSeries Double Recurve Bow Case can accommodate 2 risers up to 25” long.

Q: 5. This case airline approved?

A: Unfortunately no. A weapons case must be hard-sided with a key or combination lock in order to be TSA approved.

Q: 6. Maximum Length on Tokina Vista EF are 14.5cm / 145mm. I've been told they won't fit but it appears that they fit the specs. Has anyone used these for either the ATX or Vistas?

A: No this will Not support the tokina Vista primes. you'll need a case made to accommodate the depth and width of those lenses

Q: 7. Is this TSA approved?

A: Since there are no internal lock TSA approvals is not necessary You would need to use an approved TSA pad lock. Ruggard 3-Dial TSA Combination Lock BH #RUTPLZ3CG • MFR #TPL-Z3CG https://www.bhphotovideo.com/c/product/1022674-REG/ruggard_tpl_z3cg_3_dial_tsa_combination_lock.html

Q: 8. Can I get replacement foam inserts for this case?

A: Hello Richard Unfortunately, we do not have replacement foam inserts available, as the foam in our cases is Outsourced.

Q: 9. Does this come pre cut with spaces for your quiver and 2 storage boxes? Is there anything to soak moisture from inside the case?

A: The iSeries Medium Parallel Limb Bow Case fits parallel limb bows up to 40" long with separate quiver, 12 arrows, and accessory box compartments (sold separately – Part# 3i-0702-1B). Please take a look at the following link: https://bhpho.to/40pbqRX. To keep a case dry inside you could use this desiccant pack: https://bhpho.to/46G4rGr

Q: 10. Will the newer version be sent with the cutouts for arrows, quiver, and accessory cases? Or is it what's pictured only?

A: The case comes the same way as on the SKB website. https://www.skbcases.com/products/i-series-3614-6-small-parallel-limb-bow-case