The RCF AM 2080 Mixer-Amplifier with Mic and Aux Inputsfrom RCF AM 2080 Mixer-Amplifier with Mic and Aux Inputsis a mixer-amplifier with two mic-line audio inputs on removable connectors (the first input also has an XLR socket) and two aux inputs for music sources such as CD players and tuners. The nominal power is 80W. The amplifier output is available either for low impedance loudspeakers or 70-100V constant voltage line.

Full digital technology Mixer-Amplifier 80W RMS

70-100V and 4 Ohms outputs

2 universal inputs with phantom power on screw terminal connections

XLR connector on input 1

RJ45 port on input 2 for connection to a BM3001 microphone

Configurable Priority settings, VOX feature on input 1

Selectable aux inputs with two keys on the front panel for music source

Aux inputs with volume and tone controls

Music On-Hold and PRE outputs

Digital Chime and Siren built-in generator

Suitable for use at restaurants, boutiques, pubs, beauty centers, markets, hotels, office buildings, and medical centers

Related Questions and Answers

Q: 1. Bass +__?__ dB / Treble +__?__ dB How many dB boost for the tone controls. Bass +10dB, +12dB, +15dB or what.?? WE need to know.

A: Sorry but can't help you. Mine broke within a year after I bought it. I had to go back to using my 25-year Radio Shack amp which still works same as when new.

Q: 2. What kind of mic do i need to use with this amp?

A: Use a dynamic type microphone: Example: Audio-Technica ATR1200 Cardioid Handheld Dynamic Microphone B&H # AUATR1200

Q: 3. Can the USB port be used for a Bluetooth USB adapter to stream audio?

A: No, the USB port on the Pyle Pro PTAU45 Mini Stereo Power Amplifier cannot be used to connect a Bluetooth USB adapter, however, you can use a Bluetooth adapter with a standard analog audio plug to connect to the RCA aux inputs or the 3.5mm CD/MP3 input. The Aluratek iStream DockFree Bluetooth Audio Receiver (B&H # ALAIS01F) could be a good option for a Bluetooth adapter. It has a 3.5mm plug and comes with an RCA adapter.

Q: 4. Have a zone that needs to be page only and 3 zones that need music and page. How would I hook that up ?

A: No. Not with this model. This model : B&H # SPPL200M is the one which allows mic to be sent to different zones, by choosing on the bottom section of each input.

Q: 5. What is the output ohms for the speakers?

A: its 4-8ohms

Q: 6. I have an existing set of speakers going to my pool deck (Ch.2), and a set at the pool house (Ch.1). I'm looking to amplify the ones on the deck (Ch.2) so I have a balanced volume. Can I connect the existing speaker output (Ch.2) speaker to the input AUX. of this amplifier then run the speaker output from the amp to the pool deck and boost the volume?

A: Adjust the balance control.

Q: 7. What speakers are recommened withthis amp?

A: You can use a 100 WATS SPEAKERS

Q: 8. I have a pair of JBL Loft 40 speakers, can I use them directly on this machine? Can you also show the picture of the back as well?

A: Yes, you should be able to plug the speakers directly into the back of this unit. Unfortunately, I do not have a picture of the back.

Q: 9. Does this allow microphone to be used at same time with other sound source like aux? So is it a mini mixer+amplifier likely thing?

A: Correct: Switchable MIC PAGER and MIXING ModesSet to PAGER, the signal from AUX 1/AUX 2/CD will be attenuated BY -12dB and the signal from MIC will override to page (Auto Talkover), it is good for paging system. Set to MIXING, the signals from AUX 1/AUX 2/CD and MIC will be existed at the same time, it acts like playing at KARAOKE event.

Q: 10. what voltage is applicable in USA for this unit ?

A: 110 to 120 VAC (50/60 Hz), 24 VDC