Belden 1694A Rg6 Low Loss Coaxial Cable 500'

Belden 1694a Rg6 Low Loss Coaxial Cable 500'

Product Code: eq24002
Availability: In Stock

$885.00 $1,247.85

Qty

7 reviews Write a review

Description
Reviews (7)

Styled in orange and measuring 500' in length, the 1694A RG6 from Belden is a roll of low-loss serial digital coaxial cable. An 18 AWG spool of RG-6/U type cable, the 1694A RG6 utilizes a bare copper conductor with gas-injected foam HDPE insulation, a Duofoil tinned-copper braid shield, and a PVC jacket.

18 AWG Bare Copper Conductor Gas-Injected Foam HDPE Insulation Duofoil Tinned-Copper Braided Shield PVC Jacket

Parameters
Conductor	Coax #: 1 AWG: 18 Stranding: Solid Material: BC (Bare Copper) Diameter: 0.04" / 0.10 cm
Insulation	Material: Gas-Injected FHDPE (Foam High-Density Polyethylene) Diameter: 0.18" / 0.46 cm
Outer Shield	Layer 1: Outer Shield Trade Name: Duofoil Type: Tape Material: Aluminum Foil, Polyester Tape Coverage: 100% Layer 2: Type: Braid Material: TC (Tinned Copper) Coverage: 95%
Outer Jacket Material	PVC (Polyvinyl Chloride)
Max. Recommended Pulling Tension	69 lb / 31.3 kg
Min. Bend Radius	Minor Axis: 2.75" / 7 cm
Compliance	NEC/(UL) Specification: CMR CEC/C(UL) Specification: CMG EU Directive 2011/65/EU (RoHS II): Yes EU CE Mark: Yes EU Directive 2000/53/EC (ELV): Yes EU Directive 2002/95/EC (RoHS): Yes EU RoHS Compliance Date: 01/01/2004 EU Directive 2002/96/EC (WEEE): Yes EU Directive 2003/11/EC (BFR): Yes CA Prop 65 (CJ for Wire and Cable): Yes MII Order #39 (China RoHS): Yes RG Type: 6/U UL Flame Test: UL1666 Vertical Shaft CSA Flame Test: FT4
Suitability	Indoor
Plenum/Non-Plenum	Non-Plenum
Impedance	75 Ohms
Inductance	(µH/1' [0.3 m]): 0.106
Capacitance	(pF/1' [0.3 m]): 16.2
Velocity of Propagation	82%
Delay	(ns/1' [0.3 m]): 1.240
Conductor DC Resistance	DCR @ 68°F / 20°C (Ohm/1000' [304.8 m]): 6.4
Outer Shield DC Resistance	DCR @ 68°F / 20°C (Ohm/1000' [304.8 m]): 2.8
Attenuation	Frequency in MHz, Attenuation dB 100' / 30.5 m 1.000, 0.240 3.580, 0.440 5.000, 0.520 6.000, 0.570 7.000, 0.610 10.000, 0.710 12.000, 0.780 25.000, 1.080 67.500, 1.650 71.500, 1.690 88.500, 1.860 100.000, 1.950 135.000, 2.240 143.000, 2.300 180.000, 2.570 270.000, 3.170 360.000, 3.690 540.000, 4.600 720.000, 5.380 750.000, 5.500 1000.000, 6.420 1500.000, 7.990 2000.000, 9.370 2250.000, 10.010 3000.000, 11.780 4500.000, 14.920
Minimum Return Loss	@ Start Frequency of 5 MHz: Stop Frequency: 1600 MHz Min. RL: 23 dB @ Start Frequency of 1600 MHz: Stop Frequency: 4500 MHz Min. RL: 21 dB
Operating Voltage	UL: 300 V, RMS
Operating Temperature	-22 to 167°F / -30 to 75°C
UL Temperature Rating	167°F / 75°C
Length	500' / 152 m
Weight	24 lb / 10.9 kg
Packaging Info
Package Weight	22.5 lb
Box Dimensions (LxWxH)	14.5 x 14.25 x 9.5"

Related Questions and Answers

Q: 1. Can I use the Belden BL-1694ABHD1 connector with the Belden 1694F (Flexible)HD/SDI Cable?

A: Beldin actually recommends using the 1694ABHD3 connector instead, BH #BE1694ABH3. They suggest this because of the stranded center conductor. The 1694ABHD1 is more difficult to terminate on a stranded center conductor cable https://bhpho.to/2kh9Emf

Q: 2. Which compression crimper is best for this product and Belden's 1694A cabling? I can't find a clear answer online.

A: The Belden CPLCRBC-BR Double Bubble Compression Tool is the recommended crimper for Belden 12 GHz UHD BNC Compression Connector for 1694A RG6 Coax Cable.

Q: 3. Will the Platinum Tools SealSmart PROCON Compression Tool work with this connector?

A: This is a BNC connection, which the tool you mentioned is compatible with. It should work fine with that tool. I can tell you though that we recommend the Comprehensive EZ-Tool, B&H # COEZCPCT, specifically for this connection. https://bhpho.to/2ElmXJi

Q: 4. How stiff is this cable? Is it easy to manipulate and roll?

A: Belden 1694A RG6 Low Loss Serial Digital Coaxial Cable (500', Black) is a fantastic cable to work with that is easy t manipulate and roll if need be.

Q: 5. What are the crimp specifications?

A: We recommend the Greenlee 1300 Series which is compatible with the Belden 1694A style cable. https://bhpho.to/3d5PSQU

Q: 6. can I run sdi-3g ?

A: Yes, this cable is rated for 3G-SDI.

Q: 7. Does this Belden 1694A RG6 connector work with PCT international TRS SERIES RG 6-59 PCT-RH-CT compression tool? I think it does but double checking...

A: We are not familiar with that tool, however we do know that this connector will work wit the Platinum Tools 16220C SealSmart II Compression Crimp Tool, B&H # PL16220C. https://bhpho.to/2LFHVqx

Q: 8. is this support 3 g sdi and what is the max length?

A: Yes, the Belden 1694A RG6 Low Loss Serial Digital Coaxial Cable (500', Black) supports 3G signals and can allow up to 255 feet for 3G-SDI.

Q: 9. Can this connector be soldered as well?

A: The Belden HD BNC 3-Piece Crimp Connector for 1694A RG6 Coax Cable is a compression connector and not normally soldered.

Q: 10. Im looking make short custom cables that will run 12g signal. Up to how many feet should keep my cables to prevent degradation?

A: This cable is not strong enough for 12G-SDI. Here in an option that will work. https://www.bhphotovideo.com/c/product/1555368-REG/belden_4855r_1000_blk_12g_sdi_75_ohm_4k.html

Leif	29/09/2024
[22.5 lb] Durable, great signal characteristics, blah blah blah. This is where it's at. 5

Carson	01/09/2024
[500' / 152 m] Quality cable! I chose to terminate with Canare BCP-B53 and can vouch for the combo. 5

Logan	08/07/2024
[500' / 152 m] Purchased some pregerminated Canare cables that didn't make it a full season, all of our 169a self terminated cables are still going strong. 5

Dan	04/07/2024
[UL: 300 V, RMS] No issues. Used the recommmended BNC connectors and it is ending video signal just fine. 5

Richard	06/05/2024
[Non-Plenum] 1694A is well-designed and robust. There's a reason it's the standard! 5

Jose Manuel	06/05/2024
[82%] Well packet. Good presentación and fit for use. 5

Paul	26/04/2024
[75 Ohms] The cable arrived faster than expected. The price was comparable or lower than other places we searched and BH carried the length we needed. This cable is easy to use as we are running it for cameras. 5