You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Letus35 Helix Nato Rail - Secure Camera Mount

Letus35 Helix Nato Rail - Secure Camera Mount
  • Product Code: eq24050
  • Availability: In Stock

$224.85 $346.27

The Letus35 Helix NATO Rail - Secure Camera Mountis designed to replace the cold shoe on the rear of the Helix Stabilizer and provide six additional 1/4"-20 and two 3/8"-16 mounting threads.

Replaces Cold Shoe on Rear of Helix    Provides 6x 1/4"-20 & 2x 3/8"-16 Threads

Parameters
Mounting Threads6x 1/4"-20, 2x 3/8"-16
Packaging Info
Package Weight0.2 lb
Box Dimensions (LxWxH)4.2 x 2.6 x 2.2"

Related Questions and Answers

Q: 1. What cameras can this plate handle, that the jr. plate can't handle? Will this handle a BMCC?

A: I use this plate on the Helix JR. I have a C100 markII the small pate it came with couldn't hold it. I also have a 5D mark II and with that, I can use the small plate. I can't speak to any cameras larger than the C100 though.

Q: 2. Wondering how long the Letus35 Helix Jr. would run off this battery?

A: This battery is 14.8V with 2600 mAh capacity. We are of the opinion it should run the Helix Jr for 3-4 hours. Our recommendation is get extra barrettes if doing a paying gig.

Q: 3. Will this work with the Canon c200

A: Yes it will. The Letus Helix is designed to handle cameras like the Canon C200.

Q: 4. What's the max amp draw of this battery?

A: The Max continuous amperage is 12.2 amp.

Q: 5. What is the outer length of the rail with the .07" slot?

A: The Tilta NATO Rail Mount (Black, 0.7") is 0.7" long.

Q: 6. Will this hold an Ursa Mini Pro 4.6k? With a lens & battery I’m under 16lbs, but not sure if it will support the form factor.

A: If your total load is under 16 pounds it should work, however you more than likely will need to add the Letus35 Heavy Duty Camera Plate for Helix, B&H # LELTHXHDCP. The heavy duty plate allows you to use a larger sized camera on the Helix. https://bhpho.to/2iasObp

Q: 7. Will this work with a Canon XF405?

A: You can fly a Canon XF405 on this stabilizer.

Q: 8. What is the distance between the two 1/4-20 holes, center to center measured in mm?

A: The distance between the two 1/4-20 holes on the FREEFLY NATO Rail Clamp is approximately 18mm center to center.

Q: 9. Will this gimbal fly the C300 mark II without any additional parts?

A: Yes it will. The Helix supports a load up to 16 Pounds and is designed to work with Cinema cameras like the C300 Mark II.

Q: 10. Is there an equivalent item with a 1/4-20 Screw instead? I bought this for my Shinobi 7 but the screw is wrong.

A: SmallRig Quick Release NATO Rail (1.6) BH #SM1409 • MFR #1409 is similar to the SmallRig NATO Rail with ARRI-Style Accessory Mount (1.9"), but provides 1/4"-20 screw. See link below: https://bhpho.to/34sKLej

28/09/2024

[0.2 lb] Super well made, just like all the Smallrig stuff. Just make sure your NATO handle is not too wide because this 1.4 length is very short.

5
21/09/2024

[0.2 lb] Go for it!

5
17/09/2024

[0.2 lb] It’s been almost one year since I bought this product. I was skeptical first since there aren't many reviews of this product and it is one of the most expensive camera stabilizers in the market.
Like, I said it'd been almost a year now, and I had an opportunity to use Letus Helix on plenty of wedding events...and the more I use it, the more I am falling in love with this gimbal. It's very easy to setup; you can set this on the ground quickly change lenses and adjust very quickly. Doesn't take too much of time to bring it back to balance. The encoder motors work great. I love the briefcase mode.
I mostly use Canon C100 M2, but this gimbal easily handles my C300 M2 with Canon 16-35L III lens or with the 24-70L lens.
I had to practice a little bit to get stable footage, but I had never used gimbal in my life, the learning curve for me was minimal, a couple of hours of good practice is good enough to start getting good footage.
I looked into purchasing another gimbal in the markets, but I like the form factor of this gimbal - holding at eye level has its advantage. Customer support is excellent. Overall, I am glad I purchased this product, I am pleased with it, and I am highly recommending to anyone looking to buy Letus Helix with encoder motor. It is one of the best gimbals in the market now.

5
17/08/2024

[0.2 lb] This is the best light stabilization system that can support Red cameras, Arri Mini Alexa, BM 4.6k, Sony Fs7 or Dslr cameras with cage, heavy lenses and external battery, that is, with all its accessories together. It's better than the Ronin M, Ronin 1, Movi M5 and I tell you this because those teams are very heavy that need external arms, easyrigs or steadys to not tire after a few minutes. Apparently the resistant magnesium of the Helix, lightens all the equipment and its engines are powerful. I would put it a little less at the level of the Ronin 2 and Movi10 because those teams are already another type of similar systems and equally heavy, but popular. The Helix is quite portable and easy to calibrate on a flat surface. Always use the Helix application on your iPhone that simplifies everything, because entering through usb to basecam, that is very technical and complicated. Everything is connected through Wifi and Bluetooth. Do not buy the version with RC because I personally would not use it. It is a remote control that is purchased separately to move the Helix and I suppose it would be used to put the Helix on a car or drive it from a distance and I do not do that. If you are going to use movie cameras, make sure you have 3 batteries, because the Helix feeds the cameras through specific cables that are on your website. And also the same battery powers the follow focus through D-Tap. It has been a good buy.

5
04/08/2024

[0.2 lb] I'm a forever tinkerer and use these on everything.

5
25/07/2024

[0.2 lb] Fits seamlessly onto the Tilta cage at a number of places to allow for any Nato rail accessories

5
13/07/2024

[0.2 lb] Thus was recommended for the Jr for my dslr and potential red needs. So glad I took the advice from letus staff. If you have questions - talk to letus. They are great!!

5
21/06/2024

[0.2 lb] It is fairly compact and is going to do exactly what I need

5
28/05/2024

[0.2 lb] We have used 3 Helix units from Jr model to full size Magnesium models. Unlike ALL other gimbal systems, this one can be held easily at eye level and is lighter. It also does not need a stand like all other gimbal systems as well... You can just it down on a table or the ground and pick it right back up again. The design is GENIUS. As far as the previous review, I'm sorry they had trouble with it but there is a LOT of documentation on the website via manuals, FAQs and training videos! Software and firmware updates have made this gimbal rock solid and it has run PERFECTLY for us on every shoot.

5
24/05/2024

[0.2 lb] Great! Allowed me to mount Nato top handle to SmallRig cage.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Products You May Like

Lowel Rifa Led 80w Bulb With Wired Remote

$267.30 $344.82

Pantone Essentials Guide Set For Designers

$2,292.00 $3,048.36

Jabra Evolve 65e Wireless Uc Headset

$530.34 $779.60

Hoya Star 4x Filter 77mm For Photography

$115.14 $149.68