Millennia Hv-35P Portable Microphone Preamplifier

Millennia Hv-35p Portable Microphone Preamplifier

Product Code: eq24187
Availability: In Stock

$3,390.00 $4,644.30

Qty

6 reviews Write a review

Description
Reviews (6)

The HV-35P from Millennia HV-35P Portable Microphone Preamplifieris a professional single-channel microphone preamplifier in a small, portable enclosure. The preamp features continuously variable gain control, offering up to 60 dB of gain, plus an additional 10 dB of gain when used in "Ribbon Mic Mode." It also features a high-pass filter, phantom power, and an instrument input for high-impedance sources such as bass guitars. The HV-35P is ideal for a wide range of studio applications such as recording vocals, guitars, bass, drum overheads, and more.

Parameters
Gain	Minimum Gain: 14.5 dB, 1 dB with pad Maximum Gain (Continuously Variable): 60 dB (70 dB in Ribbon Mode)
Frequency Response	At -3 dB: <10 Hz to >200 kHz Typical -1.0 dB @ 10 Hz Typical -1.5 dB @ 200 kHz
Noise	At 60 dB Gain, 10 Hz to 30 kHz, Inputs Common: -130 dB EIN
Total Harmonic Distortion/Noise	At 35 dB Gain, 10 Hz to 20 kHz bandwidth, +24 dBu Out: <0.003%, Typical <0.001%
Intermodulation Distortion	At (50 Hz & 7 kHz) 35 dB Gain: <0.0006% +12 dBu Out <0.001% +20 dBu Out
Phase Response	At 35 dB Gain, 50 Hz to 20 kHz bandwidth, +27 dBu Out: <2 degrees deviation
Common Mode Rejection Ratio	At 35 dB Gain, 10 Hz to 20 kHz bandwidth, 100 mV C.M.: >65 dB, Typical >85 dB
Slew Rate	At 35 dB Gain, +24 dBu Out: > 25 V per µsecond
Maximum Input Level	At 20 Hz to 40 kHz: +12 dBu @ 0.02% THD+N +18 dBu @ 0.02% THD+N with pad
Maximum Output Level	At 1 kHz @ 35 dB of Gain, THD+N is: <0.001% at +26 dBu output <0.05% @ +28 dBu output
Input Impedance	Phantom Input Impedance (@ 1 kHz): 2,210 ohms
Output Impedance	24.3 ohms (x2)
Phantom Power	48 VDC ±2 VDC
Dimensions	5.7 x 1.7 x 8.2" / 14.4 x 4.3 x 20.8 cm
Weight	2.0 lb / 0.9 kg
Packaging Info
Package Weight	2.85 lb
Box Dimensions (LxWxH)	10 x 6.378 x 3.858"

Continuously variable gain control
DC-coupled ribbon mic with 10 dB gain boost setting
Front-panel instrument input
80 Hz roll-off filter
Polarity flip
48V phantom power
15 dB pad
Indicators
- Green: -30 dB
- Yellow: +8 dB
- Red: +20 dB
- Internal power supply - 100 to 240V operation
Related Questions and Answers

Q: 1. Would this device work with the Countryman b3 Lav Mic mini 1/8 connector for Sennheiser? a href= http://www.bhphotovideo.com/c/product/294555-REG/Countryman_B3W4FF05BSR_B3_Omnidirectional_Lavalier_Microphone.html target= _blank http://www.bhphotovideo.com/c/product/294555-REG/Countryman_B3W4FF05BSR_B3_Omnidirectional_Lavalier_Microphone.html/a

A: This device should work fine with the Countryman B3 (for Sennheiser EW series transmitters).

Q: 2. Could this device work with the Sanken COS-11D Omni Lavalier Mic(B&H # SAC11WNSETRB MFR # SAN-11DWNBKTRSE)? Thanks Renzo

A: MZA-900P is listed for compatibility with Sennheiser E 908B, E 908D, HSP 2, HSP 4, ME 2, ME 3, ME 4 and MKE 2 EW Gold microphones. We offer this model for the Sanken COS-11D with the 3.5mm connector for Sennheiser transmitters: B&H # AMEMP3.5

Q: 3. Hello, I am from Chile and i will go to the NYC store. My question is: can i purchase this product, but with the 220v input? (instead of 120v, as described in description) Thanks

A: Unfortunately the ART products we carry here are 120 VAC compatible only. As a US dealer we are not able to source 220V versions of this product.

Q: 4. Will a Sony NP-FH40 fit on this charger?

A: The Sony HV Battery Charger will not charge the Sony NP-FH40 Battery. Instead, get the Watson Compact AC/DC Charger for P, H & V Series Batteries, BH #WACSOPHV.

Q: 5. Will this device work with Sure Phantom powered shotgun mic over 180+ feet of cable?

A: Yes

Q: 6. Will this device convert a mic level signal to line level?

A: Yes, the MP-1 inputs a mic level signal and outputs a line level signal.

Q: 7. I have a MKE 2 EW Gold microphone I would like to convert to XLR. Description says this device works however specs says that it deliver 1.6V of phantom power. The MKE 2 EW Gold requires 7.5 V of power. Does this actually work?

A: This adapter will convert a 3.5mm mic with plug-in power, such as the Sennheiser MKE2 to XLR, and allow it to work with 48 V phantom power.

Q: 8. Will this power a Sennheiser MKH 416 to connect to a rode wireless go II?

A: No, the Sennheiser MZA 900 P In-Line Preamplifier and Power Supply for EW Series Microphones will not work to connect a Sennheiser MKH 416 Shotgun Microphone to the Rode Wireless GO II Transmitter. To connect a microphone that requires 48V phantom power to a wireless transmitter, it would be suggested to use a portable phantom power supply such as the Denecke PS-1A Portable Single Channel 48V Phantom Power Supply (BH #DEPS1A) along with an appropriate adapter cable on the supply's XLR output connection: https://bhpho.to/3vYUjr9

Q: 9. Do you have these (STM-2) in stock and if so how quickly can I get them in Richmond, Va.? Thanks

A: We do currently have the STM-2 in stock and available to ship. This unit also currently qualifies for free Expedited Shipping which has an estimated 2 day ship time to VA. please contact a Sales Rep by phone at 800-606-6969 or visit the product page to place an order.

Q: 10. how do I install my PP999 as it came with no instructions?

A: Connect your turntable to the PP999 inputs and connect the PP999 outputs to a line level input on your receiver or amplifier.

anyonymous	11/09/2024
[2.85 lb] Using between microphone and amp for a simple PA system in a large dining hall. Handheld recorder plugged into the high impedance line while feeding the XLR to the amp. Works great. 5

anyonymous	11/08/2024
[24.3 ohms (x2)] This small and easy to mount preamp fits right on the back of a battery pack with velcro. The knobs are easier to use than those of the HD camera it is mounted on. The quality audio and limiter gives me much more confidence than the built-in limiter and audio pre of the camera. 5

Sloejelley	01/08/2024
[2.85 lb] The naysayers are wrong or got faulty units. I have the sure version which predates sound devices as a brand, but it looks exactly the same and supposedly has the same (or very very close) signal path. Saying a tascam TD-100 sounds better is crazy talk. I have a tascam TD-100 and unless I got a bunk unit, it's way more noisy, has way less headroom and gain and sounds muddy and one dimensional in comparison. Don't get me wrong, the TD-100 is greT for the price but it's in a different glass. Need more gain before noise? Look no further. Want pro preamps that operate on aa batteries? Check. 48v phantom? Check. Solid, weather tight build quality? Check. It's not a neve, ua, focusrite red, API, etc, but it's awesome sounding to my ears and you can bring it to a mountain top or Antarctica if you want. 5

Bret	29/06/2024
[2.0 lb / 0.9 kg] I have used these in the past, and are really nice to use where space is a consideration, but even when space is not a consideration this is an item that I would still consider using. The RDL Website has information about using this preamp, so I would suggest visiting their Website if you have never used this before. 5

anyonymous	06/06/2024
[2.85 lb] The Sound Devices MP-1 is a good single-channel preamp for recording audio for film and video. I use mine with the Rode NGT-2 shotgun mic on a boom pole to record clean dialog with a good signal-to-noise ratio. Solid construction, not to big or bulky, this is a great tool and my clients appreciate my use of it. 5

John	19/05/2024
[24.3 ohms (x2)] This item arrived exactly on time, as it was projected to. Likewise, it was packaged with extreme care to defer damage in transit. 5