The DPA MC4001 Microphone Clip for MMP-E Cablefrom DPA MC4001 Microphone Clip for MMP-E Cablefits the recess at the MMP-E active cable preamp. It can be used with hanging mics or low-profile table or instrument mics (sold separately) to attach them to a 3/8" threaded mic stand.

For DPA Mics with Modular Active Cables    Mounts to Table Top or Mic Stand    3/8" Thread

Related Questions and Answers

Q: 1. so this is the adapter needed for "DPA Microphones 4560 CORE Binaural Headset Microphone" when connecting to Zoom F3?

A: Since there are two Microdot output connectors on the DPA Microphones 4560 CORE Binaural Headset Microphone, two of the DPA Microphones DAD6001 Microdot to 3-Pin XLR Adapters are required to connect the DPA 4560 mic to the XLR inputs on the Zoom F3 Portable Field Recorder. You will need to turn on phantom power for the two inputs on the recorder for the mics to receive power.

Q: 2. Can anyone comment on low frequency or bass sounds recording off piano? The solitary youtube comparison video makes this system sound anemic compared with Earthworks. Thnx

A: If you were comparing these to the Earthworks PM40 Piano system, you may be hearing more resonance in the PM40's lows due to its extended low frequency range. The PM40 can pickup as low as 9hz, where as the DPA's low's start at 80hz.

Q: 3. Would this windscreen be compatible with the 4018b?

A: This should fit the capsule portion of the DPA 4018.

Q: 4. Does anybody know if this will fit a Countryman B3 mic cable?

A: It should fit, yes. I have one of these and it fits almost any size wireless mic cable you could name.

Q: 5. How do you connect the clip to the adapter? I'd hate to break my adapter!

A: Ease it on. Gently but firmly.

Q: 6. Would this be compatible with the Sennheiser ME 2 Clip-On lavalier mic, or with any of the lavs that come with the EW G3 systems?

A: This clip is specifically designed to work with the DPA AC4060 series mics only.

Q: 7. would phantom power from a cinema camera power this microphone unit or would you need mixer/recorder?

A: Yes, this will work with any pre-amp that supplies 12v - 48v. If your camera has the option to switch the Phantom down to 12v, you should do so and save a little battery life.

Q: 8. Can I use this with a Shure 47 or Sanken COS11D Lav that has a microdot connector? If not, what is the best solution, please. Thanks

A: Any microphone with the Microdot connector is expecting a DC bias level to bias the electret capsule. Normally the microdot connector of a bodypack will have approx 5 V DC bias. This DPA adapter is not just a simple resistive divider - it has a complete circuit board with biasing circuit and buffer amplifier to drive long mic cables. I measured 8 V open-circuit, and 2.5 V with my DPA 4066 headset connected. This leads me to believe that the final DC voltage level will depend on the bias current drawn by the specific brand/model of electret mic you connect to it (but it will never exceed 8 V). So, although I have not tested the particular models you mentioned, I believe that any microphone with a microdot connector can be used with this adapter without risk of damage. This is certainly a very nicely-made adapter with no expense spared on the circuit from what I can see.

Q: 9. What adapter would be required to connect the DPA microphones to a Zoom F3?

A: To connect the DPA Microphones 4560 CORE Binaural Headset Microphone to the XLR inputs on the Zoom F3 Recorder you will need to implement two DPA Microphones DAD6001 Microdot to 3-Pin XLR Adapter with Belt Clip (BH #DPDAD6001BC) (belt clip is removable): https://bhpho.to/35LfsvP

Q: 10. i wonder this fits to DPA 4061 model

A: Yes this will fit both the 4060 and 4061