The 10-pack of white SCM0008 from DPA SCM0008 Miniature Clip 10-Pack Whiteare miniature clips with a double lock specially designed for quick and easy mounting of a d:screet miniature microphone on the chest of a speaker or performer. When mounting the microphone on the two holes, cable noise is attenuated.

For DPA Miniature Microphones    Mounts to Clothing    Double Locks for Cable and Microphone    Reduces Cable Noise

Related Questions and Answers

Q: 1. Will this go into the hole of a junior pin to secure it?

A: Yes. The following unit will fit in the safety pin opening.

Q: 2. Waterproof?

A: It is not rated as such.

Q: 3. Can I use this with a Shure 47 or Sanken COS11D Lav that has a microdot connector? If not, what is the best solution, please. Thanks

A: Any microphone with the Microdot connector is expecting a DC bias level to bias the electret capsule. Normally the microdot connector of a bodypack will have approx 5 V DC bias. This DPA adapter is not just a simple resistive divider - it has a complete circuit board with biasing circuit and buffer amplifier to drive long mic cables. I measured 8 V open-circuit, and 2.5 V with my DPA 4066 headset connected. This leads me to believe that the final DC voltage level will depend on the bias current drawn by the specific brand/model of electret mic you connect to it (but it will never exceed 8 V). So, although I have not tested the particular models you mentioned, I believe that any microphone with a microdot connector can be used with this adapter without risk of damage. This is certainly a very nicely-made adapter with no expense spared on the circuit from what I can see.

Q: 4. Okay team so I need one of these and one of the wind pop heads (https://www.bhphotovideo.com/c/product/350640-REG/Sanken_WSL_11_BK_Metal_Mesh_Windscreen_for.html) but don't want to pay $508 (or NZ$1000) for them - seems a tad excessive yes? Any suggestions? Cheers

A: We also offer this compatible Rycote model for the Sanken COS-11. https://www.bhphotovideo.com/c/product/676007-REG/Rycote_105504_Miniature_Black_Lavalier_Foam.html

Q: 5. I don't see the specs for this. Any one know how large?

A: The manufacture does not list any specifications on this coupler. It has a very specific use. It is a safety clip for the Global Truss F14 coupler pin to lock truss sections together.

Q: 6. Can you verify that the cable length on this microphone is indeed 13.1' long? I purchased a few of these 3 or 4 years ago and the cable was shorter on those. I prefer the longer cable.

A: 13.1' (4m) cable permanently attached to mic, TA3F connector at power module

Q: 7. so this is the adapter needed for "DPA Microphones 4560 CORE Binaural Headset Microphone" when connecting to Zoom F3?

A: Since there are two Microdot output connectors on the DPA Microphones 4560 CORE Binaural Headset Microphone, two of the DPA Microphones DAD6001 Microdot to 3-Pin XLR Adapters are required to connect the DPA 4560 mic to the XLR inputs on the Zoom F3 Portable Field Recorder. You will need to turn on phantom power for the two inputs on the recorder for the mics to receive power.

Q: 8. Will this work with something like the Countryman EMW?

A: Yes, the LMC Sound CMTVPRBK C Mount Vampire Clip Universal Lavalier Mount should be capable of use with the Countryman EMW Omnidirectional Lavalier Microphone. Although compatibility is not specifically stated, the EMW has a 6.6mm measurement that is within the stated mic head size of 5-7mm compatible with the CMTVPRBK, and also has a similar form factor to other microphones stated as compatible such as the Tram TR50.

Q: 9. Would these fit on a Rode lavalier?

A: The DPA Microphones AIR1 Universal Miniature Fur Windscreen would be suitable for the Rode Lavalier GO (B&H # ROLAVGO).

Q: 10. Would this be compatible with the Sennheiser ME 2 Clip-On lavalier mic, or with any of the lavs that come with the EW G3 systems?

A: This clip is specifically designed to work with the DPA AC4060 series mics only.