The white DPA SCM0017 Curved Clip for 4060 Lavalier Microphonesis a curved clip designed to securely attach a 4060 Series miniature lavalier microphone onto clothing. The curved design creates distance between the capsule and the clothing, minimizing rustling noise created by fabric contact in applications such as live stage, broadcast TV, houses of worship, and more.

Due to its flexibility, the SCM0017 can be used for both left- and right-side mounting. The rear cable hook allows you to run the mic cable behind clothes, minimizing the lavalier's visual appearance.

The SCM0017 is backward-compatible with non-cable-reinforced miniature lavalier microphones via a sliced-cable relief.

This item comes with 10 curved clips.

Holds 4060 Series Lavalier Mics    Creates Distance for Less Clothing Noise    Left- and Right-Side Mounting    Discreet Rear Cable Hook

Related Questions and Answers

Q: 1. Do these concealers have a back that snaps on?

A: thank you for your question. this unit is just the top portion of the concealer without a backing.

Q: 2. Will this work with a tascam lav?

A: The Bubblebee Industries Lav Concealer for DPA 4060 Black is designed to fit the DPA4060 specifically and will not work in the same manner with a lavalier microphone from Tascam.

Q: 3. Do these come with the metal clips and space brackets? If not, which clip/brackets are compatible?

A: Yes, the DPA Microphones Clear Concealer Top for d:screet 4060/61/62/63/71 does include the metal clip and space brackets. I confirmed this information with DPA.

Q: 4. so this is the adapter needed for "DPA Microphones 4560 CORE Binaural Headset Microphone" when connecting to Zoom F3?

A: Since there are two Microdot output connectors on the DPA Microphones 4560 CORE Binaural Headset Microphone, two of the DPA Microphones DAD6001 Microdot to 3-Pin XLR Adapters are required to connect the DPA 4560 mic to the XLR inputs on the Zoom F3 Portable Field Recorder. You will need to turn on phantom power for the two inputs on the recorder for the mics to receive power.

Q: 5. would phantom power from a cinema camera power this microphone unit or would you need mixer/recorder?

A: Yes, this will work with any pre-amp that supplies 12v - 48v. If your camera has the option to switch the Phantom down to 12v, you should do so and save a little battery life.

Q: 6. Is this Mic mutable?

A: Hi Bryan, There is not a mute option built into the microphone, no. Sharon

Q: 7. Is this a soft cable lav? I'm asking because i have two 4060s and one of them soft cabled and another is resilient. Seems like its about new and old generation

A: Yes. The cable on the 4060 CORE is very flexible.

Q: 8. Hello. Do I need anything additional to use these lavs. I have a SD 633 mixer, and was considering getting these and just running standard xlr cables to these. I did however come across a discussion that talked about using DPA DAD3056 for these lavs?

A: The DPA Core 4060 comes in the box with the microdot to XLR, all you need is XLR cables to run it back to the SD 633. If you own Lectrosonics wireless transmitters with TA5 inputs the microdot DAD3056 will allow you to connect the lavaliers to your Lectrosonic wireless system directly.

Q: 9. Would this be compatible with the Sennheiser ME 2 Clip-On lavalier mic, or with any of the lavs that come with the EW G3 systems?

A: This clip is specifically designed to work with the DPA AC4060 series mics only.

Q: 10. How would I use this microphone with a GoPro Hero5? I would like to keep it as simple as possible.

A: This DPA 4060 has a locking 3.5mm connector and it also requires 5 to 10V of plug-in power so I would not recommend it for use with the GoPro Hero5. The 4060 is really designed for use with a wireless transmitter, not for direct connection to a camera. Additionally, the 3.5mm GoPro mic adapter has a standard non-locking input so the mic will not be connected securely and it is very likely that the mic may require more voltage than the camera can supply. You definitely can use the DPA 4060 with a wireless mic system such as the Sennheiser EW 112P G4 Camera-Mount Wireless Omni Lavalier Microphone System - A: 516 to 558 MHz (B&H # SEEW112PG4A) -- you can choose the frequency band. The wireless transmitter will supply the proper voltage for the mic and the wireless receiver will connect to the GoPro Pro 3.5mm Mic Adapter (B&H # GO35MA) without any problems. We also have other wireless mic systems that use the same type of locking connector and wiring as Sennheiser which would be compatible with with the 4060 mic. We can also help you to select a different mic if you do prefer to use a wired mic with the Hero5. Please contact us by phone or through live chat on the website for further assistance.