You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Chrosziel Magnum 200 Wireless Lens Control Receiver

Chrosziel Magnum 200 Wireless Lens Control Receiver
  • Product Code: eq24252
  • Availability: In Stock

$9,174.00 $12,476.64

With dual outputs, the Chrosziel MagNum 200 Wireless Lens Control Receivercan drive up to two motors that connect via 7-pin LEMO. The receiver is capable of calibrating motors to the lens without the aid of the transmitter. When connected to a camera via the serial output, start/stop can be remotely controlled from the transmitter. The MagNum 200 system can operate on 2.4GHz and 430MHz frequencies for ensuring the greatest possible working distance and reliability. The 2.4GHz antenna is built-in and a BNC 430MHz antenna is included. The the receiver can be used in a wired/studio configuration drive motors with input from ENG demand controls. Using an Aladin extension modules, which are mountable to the receiver body, the MagNum system can control up to four motors in total.

Wireless Focus/Iris Receiver    Drives 7-Pin LEMO Digital Motors    Autonomous Lens Calibration    2.4GHz and 430MHz Operation    BNC Antenna Included    Expandable to Control Four Motors

Parameters
Channels2 (focus and iris), expandable to 3rd zoom channel
Ports1 x 12-pin Hirose for ENG demands
1 x 9-pin LEMO serial port for camera start/stop control
1 x 5-pin LEMO 10-30V power input and camera start/stop control
2 x 7-pin LEMO digital motor interface 1 x BNC for 430MHz antenna
Antennas1 x Integrated 2.4 GHz
1 x BNC 430 MHz
Weight0.6 lb / 262 g

Related Questions and Answers

Q: 1. Will this work with an existing dual-handle nato rig such as the Tilta Dual Handle or the Small Rig Dual Handle? Or does it block the Nato ports on the side of the Gimbal?

A: The Tilta Wireless Control Receiver Module for RS 2 will not work with the SmallRig Dual Handgrip for DJI RS 2/RSC 2 Gimbal but will work with the Tilta Dual Handle Power Supply Bracket.

Q: 2. will this attach and work on either side meaning both the right and the left sides of the DJI RS2?

A: Yes, it can be mounted to either side of the RS2.

Q: 3. Does this pair with the nucleus M remote?

A: This piece is designed specifically for the RS2 and it does not define pairing with other device.

Q: 4. operating distance?

A: We were not able to confirm, but it is our opinion that this high quality unit should be able to do about 300' line of sight. Any interference cuts that distance of course. In most production settings, the camera assistant doesn't want to be too far away from the camera anyway. So in common movie set situations, we think it should work very well, even around walls, say 10-30 feet from the camera. This should work whether the camera is on a tripod, dolly, Steadicam, crane or even a really big drone.

Q: 5. do i need this to use with the Tilta basic ring and tilta control handle?? or i can control rs2 gimbal directly with the tilta handle?

A: With the basic ring the controls would still be on the RS2 and facing you at the bottom of the ring. . Only the battery mounts on the top of Ring. It does not include any wireless controls. Tilta Basic Ring Grip for DJI RS 2 - https://www.bhphotovideo.com/c/product/1606894-REG/tilta_tga_brg_basic_ring_grip_for.html/overview?sts=pi&pim=Y

Q: 6. Is this motor compatible with a Digital Bartech?

A: While we are not re-sellers of Digital Bartech products this motor is often bundles with those units. It should be compatible.

Q: 7. Will this pair with the Ronin 2 remote?

A: This Tilta Remote Control Receiver Module for RS 2 pairs with the RS 2 Remote Control Handle for Advanced Ring Grip, Float System and Remote Control Kit to allow you to remotely control the gimbal, camera, and DJI wireless lens control motor.

Q: 8. It is compatible with chrosziel fox?

A: If what you have is the original analog Fox, the answer is no. The Heden M26VE is a digital motor and will not work with analog systems.However, if what you have is the DigiFox however, this is a newer system and will work with the digital Heden motor.In short, if you have a analog Fox, no. If you have a DigiFox, yes.

Q: 9. Does this work with the RS3 pro gimbal?

A: Yes, the Tilta Wireless Control Receiver Module B&H # TIGARCR would also support the DJI RS3 Pro Gimbal.

Q: 10. Would this work with an FX6 handgrip?

A: The Chrosziel Compact Zoom Control Unit for Angenieux EZ-1/EZ-2 Lenses is compatible with the handgrip on the Sony FX6 Full-Frame Cinema Camera.

15/09/2024

[0.6 lb / 262 g] The construction is superb! The knurled grip is made of metal and works in all weather conditions and temperatures. Just amazing how Chrosziel continues to do fine work.

5
14/09/2024

[0.6 lb / 262 g] I'm a veteran Hollywood union focus puller and a long time wireless focus user. I've been looking for an affordable, three channel alternative for some time. After using one on a short film in 2015, I decided to purchase this system from Chrosziel. I'm very happy with it so far. Chrosziel is a small company and they are dedicated to customer service. After offering a few suggestions, I saw them implemented almost immediately. The device works as a focus puller would expect. The system is compatible with a wide variety of motors and uses Lemo connectors. It is compatible with Preston motors if you already own those. I have two handsets and send control of the iris to the 2nd handset for the DP. Firmware updates are downloaded from the website and easy to install via a USB stick.

5
09/09/2024

[0.6 lb / 262 g] Works as advertised with my new Canon lens(CJ series)and a legacy Canon servo grip. My only complaint was the very long wait time for the cable. Over 2 months. Hopefully the delivery time will improve for future orders.

5
06/07/2024

[0.6 lb / 262 g] Worked great and paired quickly to my Tilta Advanced Ring Grip handle. My last one broke due to user error. I am glad this one was in stock!

5
05/07/2024

[0.6 lb / 262 g] The MagNum 300 3-Channel Wireless Lens Control System by Chrosziel is intuitive and made for demanding professionals. We have 5 complete systems in our rental inventory, and customers have always been very happy with the performance. Easy to use, clean and streamlined IN-HAND feel, responsive to even the slightest input, and great feedback (feeling) from the actual focus knob. As the owner of over 25 other remote lens systems, the MagNum has been everything we expected!!

5
04/07/2024

[0.6 lb / 262 g] This piece was actually missing in a strobe kit I ordered and after notifying customer service they were super helpful and quick to make sure they sent me a replacement ASAP. Easy to use and gets the job done for the older Godox systems that don't have built-in wireless connectivity.

5
29/06/2024

[0.6 lb / 262 g] I'm a veteran Hollywood union focus puller and a long time wireless focus user. I've been looking for an affordable, three channel alternative for some time. After using one on a short film in 2015, I decided to purchase this system from Chrosziel. I'm very happy with it so far. Chrosziel is a small company and they are dedicated to customer service. After offering a few suggestions, I saw them implemented almost immediately. The device works as a focus puller would expect. The system is compatible with a wide variety of motors and uses Lemo connectors. It is compatible with Preston motors if you already own those. I have two handsets and send control of the iris to the 2nd handset for the DP. Firmware updates are downloaded from the website and easy to install via a USB stick. If you purchase the option to include the zoom rocker to control the third channel, you won't be disappointed. Together with the software soft stop, performing an on camera zoom while pulling focus is easy. My favorite function of this unit are the 4 programmable user buttons. I expand my stop and focus scale often and with the programmable user buttons, I can set them, cancel them and then recall them.

5
27/06/2024

[0.6 lb / 262 g] very small and lightweight.

5
18/06/2024

[0.6 lb / 262 g] After trying numerous follow focus systems including ones that were from the “best” manufacturers, we still had issues getting reliability out of a wireless FIZ control system, and poor customer service even from vendors charging a very high premium for their products. Finally we tried Chroziel and not only did their magnum system work flawlessly, their customer service is great, and best of all if you are using Canon Cine Servo lenses it works natively with them so you don’t need to use as many motors for FIZ control, or depending on the lens you may not need any (i.e Canon 50-1000). This all makes for a reliable, and much more self contained system than any other on the market. I wouldn’t even consider a brand other than Chroziel for FIZ control after using the Magnum.

5
28/05/2024

[0.6 lb / 262 g] Its amazing that these inexpensive little gadgets give me the ability to control my lighting from behind my camera. That was something I always considered a luxury.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Chrosziel Magnum 200 Wireless Lens Control Unit

$12,438.00 $17,910.72

Chrosziel Mn-200 Wireless Lens Control System

$23,262.00 $30,240.60

Chrosziel Zoom Rocker For Magnum Mn-200/150

$2,946.00 $4,301.16

Chrosziel Magnum Mn-200-r Rs-422 Remote Cable

$1,149.00 $1,401.78

Chrosziel Magnum Mini Wireless Focus Control

$13,377.00 $16,855.02

Chrosziel Mn-150 Wireless Lens Control System

$18,567.00 $28,221.84

Chrosziel D-tap Power Cable For Magnum 90°

$1,005.00 $1,547.70

Chrosziel Hedén M26ve Lens Control Motor

$7,863.00 $11,558.61

Chrosziel Magnum 9-pin Lemo To Fujinon Cable

$822.00 $1,224.78

Chrosziel Magnum 100 Single-channel Hand Unit

$7,746.00 $11,773.92

Chrosziel Magnum Mini Kit Cdm-100s Motor

$19,503.00 $23,403.60

Products You May Like

Kodak S2080w Network Scanner 80 Ppm

$4,800.00 $7,584.00

Lg Csac-012k 4k Controller For Lsac012 Display

$7,760.01 $10,631.21

Canon Pgi-280 Black Ink Tank 11.2ml

$51.00 $68.85

Dana Dolly Universal Track Bracket

$344.97 $538.15

Kopul Hdmi To Dvi Cable - 3 Feet

$22.47 $33.03

Huddlecamhd 3.2mp 30x 1080p Usb 3.1 Ptz Camera

$2,997.00 $4,495.50

Camplex 6' Lemo Fuw To Duplex St Fiber Cable

$1,610.85 $2,158.54

Digitech Mosaic 12-string Effect Pedal

$659.97 $983.36