The Blackmagic Teranex Mini HDMI to Optical 12G Converterfrom Blackmagic Teranex Mini HDMI to Optical 12G Converterallows you to convert an HDMI signal to a 12G-SDI output, or install an optional optical fiber module and convert an HDMI signal to fiber. In either case, the output will automatically match the HDMI input resolution. Up to DCI 4K (4096 x 2160) 60p resolution is supported on both input and output.

An optical fiber module is not included but is supported on the rear. 3G and 6G modules are currently available (model #s ADPT-3GBI/OPT and ADPT-6GBI/OPT), and 12G modules are in the works.

The Teranex Mini HDMI to Optical 12G Converter also features full-size XLR inputs that are switchable between balanced analog and AES/EBU digital audio, and which allow you to connect separate audio. The converter also has an Ethernet port that allows you to manage the converter remotely from a Mac or Windows computer using the included Converter Utility software. This capability is especially useful when you're in a larger facility using numerous converters.

The Ethernet port can alternatively be used for Power-over-Ethernet (PoE). If you don't want to use PoE, you won't have to deal with cumbersome power supplies, as the Teranex Mini features a built-in 90-240V power supply, and all you'll need is a standard IEC power cable, sold separately.

The Teranex Mini can be used rack-mounted, concealed in cable ducts, or desktop-mounted. Its compact size makes it useful for portable racks at live events or in broadcast trucks. Up to three units can easily be installed in an optional 1 RU 19" rack tray.

The standard front panel can be replaced with an optional Smart Panel that offers a spin knob, color LCD, and six control buttons, including a menu button. The substantially large LCD will show you the video conversion in progress and will also let you monitor audio levels and verify timecode. The standard front panel simply comes off and the Smart Panel easily attaches in its place. When you're using the standard front panel, you'll have access to an array of mini switches that will let you change settings instantly in correspondence with a diagram printed on the converter. If you swap in the optional Smart Panel, you'll instead be able to use simple on-screen menus while seeing exactly what you're converting.

The Teranex Mini is designed with intelligent heat dissipation that prevents overheating. What makes this feature so effective is a smart thermal design with crossflow cooling that achieves the optimal heat dissipation even when you have units rack-mounted side-by-side one another. An intelligent thermal subsystem and internal heat pipe assist with cooling and keep the air flowing at all times while minimizing noise. Moreover, if the Teranex Mini gets too hot, you'll instantly receive a notification through the remote control Ethernet utility and on the front panel. When multiple units are rack-mounted side by side, each Teranex Mini works together to pull air through the rack, keeping all units cool and providing redundancy for each one.

Convert an HDMI Signal to 12G-SDI    Convert HDMI to Optical Fiber (Optional)    Up to DCI 4K/60p Support on Input/Output    XLR Inputs Switchable to AES/EBU    Ethernet Port for Remote Control or PoE    Built-In 90-240V Power Supply    Rack-Mount, Duct or Desktop Installation    Install up to 3 Units in Single 19" Rack    Supports Optional LCD Smart Front Panel    Intelligent Thermal Heat Dissipation

• Convert an HDMI signal to a 12G-SDI output
• Convert HDMI to optical fiber via optional fiber module
• Supports up to DCI 4K (4096 x 2160) 60p signals on input and output
• Full-size XLR inputs switchable between balanced analog and AES/EBU audio
• Ethernet port supporting PoE or remote control via included Mac/Windows software
• Built-in 90-240V power supply (optional standard IEC power cable required)
• Can be installed in 19" racks (up to 3 units side-by-side), cable ducts, or desktop-mounted
• Front panel is replaceable with an optional LCD Smart Panel
• Intelligent thermal heat dissipation
• Full SDI re-clocking and low jitter

Related Questions and Answers

Q: 1. We have a BMD VideoHub that we use to route feeds to a video wall. The video wall performs best and prefers 720p. We occasionally have speakers who want to connect to the videowall using a laptop. Can the Teranex Mini HDMI to Optical 12G down convert laptop feeds into 720 reliably? I see I can force 1080 or 4K, but can I force downconversion out of the unit so the the SDI or Fiber port out are sending 720?

A: No, the Teranex Mini does not down convert video signals.

Q: 2. Can this be used to convert an URSA Mini 4.6k to Ethernet and connect to the Studio Converter for Tally/Talkback/Program Feed with camera?

A: Unfortunately Blackmagic Design Teranex Mini IP Video 12G will not work in the way you are inquiring about. This device requires a pair of them, 1 as a transmitter and the other as a receiver connected to the same network and configured to communicate with each other.

Q: 3. Trying to setup 6 TVs from Decimator to Teranex Mini SDI 12 DA. Church PC HDMIDecimator MD HXMini SDI DASDI to HDMI Converters (BM Micro)It's not working :O( Any ideas?

A: I would check the Decimator, make sure the SDI output is set to the proper source. If you are converting that source through the DUC, then make sure the DUC has the proper source too. Also make sure you use SDI 2 out - or you need to make sure SDI-1 is not set to Loop SDI-IN. Not TNX Mini support, but probably the issue.

Q: 4. Can you choose which of the 16 audio channels on the SDI stream to de-embed?

A: When using the Blackmagic Design Teranex Mini SDI to Audio 12G Converter you may select any of the 8 channel pairs to extract.

Q: 5. Can this be used to automatically calibrate an LG consumer OLED display?

A: The Blackmagic Design Teranex Mini SDI to DisplayPort 8K HDR Converter does not have a HDMI connection. However, you can use HDMI to SDI converters. Yes, the Blackmagic Design Teranex Mini SDI to DisplayPort 8K HDR Converter could work and calibrate a connected display. Please note you will also need a colorimeter like the following model. Calibrite ColorChecker Display Plus BH #CACCDIS3PL Blackmagic Design Micro Converter HDMI to SDI 12G with Power Supply BH #BLMCHS12PSU

Q: 6. Can this be used to take a program feed and send it to a monitor?

A: Yes

Q: 7. Does the optical SDI output loop the BNC SDI input?

A: Yes, Blackmagic Design Teranex Mini Optical to HDMI 12G Converter fiber connection is IN or OUT -- Optical Fiber Video Loop Through: 1 x 12G-SDI loop output.

Q: 8. Can you use this unit to split a program feed?

A: Yes.

Q: 9. Can this be used to get SDI 12g signal from Canon's C200 HDMI output? I want to setup my Canon C200 for live 4k production with ATEM Television Studio 4k.

A: This does not up or down convert. To get 4K from HD consider the Teranex AV.

Q: 10. Hi,We have Sony FS 7 , 4K cameras & 4 k upgraded FOR A HVS 110 switcher,We want to use this for 4 K Live production, we want your guidance on converting the 4K Hdmi output from Sony FS 7 camera to 4 K quad input of our FOR A switcher....with minimum of 70 mtr cable length,We are thinking of going for Teranex Mini - HDMI to SDI 12G - From camera end & re-converting to 4 k quad output with Teranex Mini - 12G-SDI to Quad SDI - at the switcher end , is it feasible to this with 70 - 80 mtrs of cable length with this converters, will it take this load for minimum 5 - 6 hours of production,will it gets heated up beyond permissible limit, If it can take this load which cable you will recommend,Pl give us your technical opinion & options,RegardsShashikant

A: The equipment combination should work, but you'll have to place both converters at the camera end. So you'll need to make 4 runs of RG11, from the 2nd converter to your FOR A quad input. You can't run the 2 6G lines 80 meters, so that's why you need to do both conversions and run 4 3G lines. Make sure you check the coax RG11 for the exact spec, because they do vary, but should be able to take 3G to at least 100 meters.