Electro-Harmonix Holy Grail Max Reverb Pedal

Electro-harmonix Holy Grail Max Reverb Pedal

Product Code: eq24609
Availability: In Stock

$555.30 $710.78

Qty

6 reviews Write a review

Description
Reviews (6)

The Electro-Harmonix Holy Grail Max Reverb Pedalfrom Electro-Harmonix Holy Grail Max Reverb Pedalis a compact reverb pedal that features four different reverb algorithms: Spring, Hall, Plate, and Reverse. The algorithms were designed and tailored for the electric guitar, but work equally well with most instruments and voices. Controls are included for Time and Blend. The Time knob adjusts the reverb's decay when in Spring, Hall, and Plate modes. In Reverse mode, it regulates the length of time between striking a note and the reverb fade-in. While in Plate mode, when Time is set to its maximum position, the reverb decay is over 30 seconds long, creating a lush reverb wash with each new note. A Blend knob adjusts the wet/dry mix. The unit is enclosed in a tough and compact die-cast chassis, and comes with a US9.6VDC-200BI power supply.

The Spring algorithm is a re-creation of the classic spring reverbs that are found in many guitar amplifiers. The Hall algorithm simulates the reverberations heard in large spaces such as concert halls and cathedrals. The Plate algorithm is an emulation of a metal plate reverb which was commonly found in high-end recording studios during the 1960s and '70s; it is a very smooth, tonally balanced reverb that works well on many different instruments, and especially on vocals. Reverse Reverb is an emulation of the reverse reverb trick commonly performed in studios. True bypass switching ensures your tone won't be affected when the pedal is bypassed.

For Live Stage, Studio, & Rehearsals Spring, Hall, Flerb, and Room Reverbs True Bypass LED Indicator 1/4" Input & Output Jacks Rugged Die-Cast Chassis Includes DC Power Supply

Parameters
Controls and Indicators	Reverb switch Time knob Blend knob Bypass footswitch with status LED
Connectors	1/4" phone jack, input 1/4" phone jack, output DC Power jack, 9 VDC power input
Impedance	Input: 1 MOhm Output: 550 ohms
Power Requirements	9 VDC @ 80 mA
Dimensions	4.00 x 4.75 x 2.25" (102 x 121 x 89 mm)
Packaging Info
Package Weight	1.55 lb
Box Dimensions (LxWxH)	7.2 x 6.1 x 3.1"

Related Questions and Answers

Q: 1. Does it have a polarity switch?

A: No

Q: 2. Do I need a particular microphone for boss vocoder vo-1?

A: This will work with any dynaminc microphone with an XLR connector.

Q: 3. Hello, can I plug headphones on the H9 ? Tks... Ivan

A: There is no headphone output.

Q: 4. What is the weight of the pedal,I fly with four,and must limit the weight?

A: The weight of the FV50H is 0.9 lb (0.4 kg).

Q: 5. which lexicon reverb works with windows 8.1?

A: So there's a reverb plugin that comes with the Scarlett Suite. It will work on windows 8.1, but the DAW needs to support VST, AU, or RTAS. But you would have to buy Scarlett Suite.

Q: 6. Does it support half-pedalling?

A: Yes, this pedal produces different sustaining levels, depending on how far you press down. I would describe it as a continuum of sustaining, rather than just a couple of levels.

Q: 7. dose it have USB in USB out?

A: The Plug & Mix Digital Reverb Plug-In (BH # PLDIGITLRVRB) is software only and does not include any physical hardware which would feature a USB port.

Q: 8. Will this work in my smoke detector at home that accepts 9V batteries?

A: Yes it will , I would test the smoke detector every so often

Q: 9. Has anyone ever tried this with an electric violin? Seriously thinking about this for my Strat, but if it is awesome with a NS Design Wav 5 that could seal the deal immediately...

A: An electric violin with passive pickup will require pre-amplification to utilize this pedal.

Q: 10. Is the power supply multi or just 110v?

A: The included power supply with the Electro Harmonix Memory Boy Pedal is only rated for use on the US 110-120VAC standard.

Steve	25/09/2024
[9 VDC @ 80 mA] I got the last one in stock (time to reorder, B&H!) and I can see why... the Mel9 pedal adds a completely new vibe to any electric guitar setup. It's very dynamic and responsive, only slightly losing track with very soft notes. Send the dry out to one amp, and the effect out to another (or the sound board) and your sound palette gets very big very quickly. Like everyone else probably did, I immediately dialed in the flute sound and learned Strawberry Fields Forever, but it doesn't stop there. Strings, cello, orchestra and choir sounds are super-fun and very authentic - even down to the warbly tape sound. One thing I'm considering is putting an EQ pedal on Mel9 as its sounds can be a little harsh in the midrange. Dial that back, add some reverb, set the attack and decay at about 1 o'clock, and you have a string pad like keyboard players have always enjoyed - at a fraction of the cost of MIDI guitar synth. Play around with pickup settings too, as the effect sound definitely responds differently to neck vs. bridge pickups. Playing speed is also a factor... most of the sounds take a little time to bloom, so staccato, rapid picking probably won't let the sounds fully develop. But for adding a huge layer and vintage texture to your sound, the Mel9 is where it's at. I can't wait to try it on bass guitar too. This one will be used a lot. 5

Bnutz	17/09/2024
[1.55 lb] The EHX series of organ pedals are a breath of fresh air in an industry that seems content recycling the same basic stompbox designs. You can get a wide range of sounds that go from subtle organ texture to bizarre voicings. Having a dry signal out is fantastic for players like me (bass) who want to keep an uneffected signal to my bass rig. Meanwhile I can run the organ sounds into a separate amp and/or series of pedals and tweak to taste. I'm not sure I'll use it in a live setting much, but its a blast to record and play with. 5

Jim	17/07/2024
[9 VDC @ 80 mA] A simple and easy to use looper Clean controls, solid switch design and rugged body. 5

Michelle	25/04/2024
[1.55 lb] Best chorus I've played. Limited range but sounds so good. The modern 9v plug is a bonus. 5

Skizz	22/04/2024
[9 VDC @ 80 mA] Yes, this pedal is pretty cool! I particularly like the orchestra and choir voices, though the rest are interesting too. I got it, added it to my pedal board, and tried it out at a gig. Audience members were looking around trying to figure out where all the orchestral sounds were coming from. My bandmates thought it was hilarious that our scrappy garage band suddenly had this new big production sound. 5

anyonymous	07/04/2024
[9 VDC @ 80 mA] First of all, this pedal has so many features and applications. Four different octaves, attack, and low-pass filter (I don't use the detune much, but others probably would get some mileage out of it), plus a built-in presets footswitch. One note: if you are powering your pedalboard with a dedicated pedal power supply, only certain combinations of power supply and pedals will work if you include the POG2. Do some research online if you already have a pedal power supply or if you will add one in the future. Even though this was a special delivery order and not something that B&H carries in stock, B&H delivered very quickly. 5