Ergotron Mx Desk Mount Lcd Arm For Monitors

Product Code: eq24669
Availability: In Stock

$705.00 $951.75

Qty

20 reviews Write a review

Description
Reviews (20)

Quickly and easily mount displays weighing from 14 to 30 pounds and ranging in size up to 30" using the Ergotron MX Desk Mount LCD Arm for Monitorsfrom Ergotron. Once mounted this mount offers enhanced maneuverability allowing the display to be lifted to 5", tilted up to 80°, pan the display a full 360°, and rotate it up to 90° for complete viewing comfort. Installation is simple as the mount comes compatible with both 75 x 75 and 100 x 100 mm mounting configurations.

Supports LCD Displays up to 30" 14 to 30 lb Weight Capacity 5" Lift 80° Tilt 360° Pan 90° Rotation Portrait / Landscape Rotation with Lock

Parameters
Compatible Models	Displays Up to 30"
Mounting-Hole Pattern	75 x 75 to 400 x 200 mm
Load Capacity	30 lb / 13.6 kg
Mounting Compatibility	Grommet (Width): 0.31 to 2" / 7.87 to 50.8 mm Grommet (Depth): Up to 3" / 76.2 mm Desk Clamp: Up to 2.6" / 66 mm
Adjustments	Rotation: 90° Swivel: 360° Tilt: 80° Height: 5" / 12.7 cm
Extension	Arm: Up to 17.0" / 42.0 cm
Orientation	Landscape, Portrait
Material of Construction	Aluminum
Packaging Info
Package Weight	10.75 lb
Box Dimensions (LxWxH)	27 x 8.6 x 7"

Accommodates mid-sized displays and all-in-one computers weighing up to 30 lbs

Position your display for maximum ergonomic comfort to relieve eye, neck, and back strain

Designed with patented Constant Force lift-and-pivot motion technology, displays are easily positioned with just a light touch

Cable management feature conceals and routes cables under the arm, out of the way

Free up your table or desktop to increase your workspace

Upgrade LCD monitors and TVs with improved ergonomic adjustment

Pre-assembled arm offers monitor/TV theft deterrence

Extends LCD up to 17" (42 cm); push your display out of the way when not in use

Easy-to-use, simple installation and effortless operation

Made from durable polished aluminum

Related Questions and Answers

Q: 1. Will this support Eizo ColorEdge CG277?

A: The Ergotron LX Desk Mount Monitor Arm (Polished Aluminum) BH #ER45241026 • MFR #45-241-026 will support monitors up to 25 lbs. The v weighs in at about 19.4 lb / 8.8 kg (without Stand) and has a 100mm x 100mm VESA mounting pattern compatible with this Ergotron monitor arm.

Q: 2. Would this possible work with the BenQ PV3200PT 32 monitor? It is 25.5 lbs, which is just over. Wondering if I could still make it work?

A: I think you'll be fine. I have two of these. One is holding a 43 Hisense TV that I use as a second monitor. It's a little lighter at 22 pounds, but I have it on an extension arm. (Essentially another of the top arms). It's over the rating of the unit with the extension, but it's been fine.Also, I move these around. I'm not just making an adjustment and then leaving them alone. I make a lot of use of the ability to move them closer when I'm working and back out of the way when I'm done.I'm very pleased with them and would buy again if I needed another mount.

Q: 3. What is the minimum space between the wall and edge of the desk (desk can not be moved) I need to mount the clamp?

A: The desk clamp is about a 5' square.

Q: 4. Is this item compatible with an Apple Studio Display?

A: The Ergotron LX Desk Mount Monitor Arm (White) (100mm x 100mm - 200mm x 200mm) BH #ER45490216 will work with the Apple Studio display with VESA adapter ; Apple 27" Studio Display (Standard Glass, VESA Mount Adapter 100mm x 100mm) BH #APMMYQ3LLA • MFR #MMYQ3LL/A

Q: 5. How close can you get it to the wall? Specifically how much distance is there between the last joint and the mounting bracket?

A: Using the Ergotron LX Desk Mount Monitor Arm (White), you could potentially mount a monitor about 3-4" away from a wall.

Q: 6. Will this work with a Mac 27 Cinema monitor? If you don't have a Mac monitor, please don't speculate.

A: It will work, but be very careful when buying the Vesa Mount. the screws are very cheap and will break. its kinda sad, but make sure apple is responsible if your monitor fails at all, the screws are very cheap. Good Luck, it will owrk, but make sure you get better screws or trust apples screws that come with the Vesa Mount

Q: 7. Can this be used with an iMac? Would I need any extra adaptors or anything to mount it to an iMac?

A: it won't work, as the new iMac doesn't let you do custom mount.

Q: 8. Has anyone attached a 27inch NEC to this ?

A: No we have not but bear in mind: Load Capacity 25 lb / 11.3 kg Mounting-Hole Pattern 75 x 75 to 100 x 100 mm Orientation Landscape, Portrait Supported Grommet Size Width: 0.31 to 2" / 8 to 50.8 mm Depth: 3" / 76.2 mm Desk Clamp Compatibility 0.4 to 2.4" / 10 to 60 mm Contact Ergotron directly for mounting your specific monitor: Ergotron; Tel: 800-888-8458 Email: customerservice@ergotron.com

Q: 9. Could I mount a IsoVox on this arm?

A: It depends on which ISOVOX unit is being mounted on the Ergotron MX Desk Mount LCD Arm. This arm has a 14 to 30 lb weight capacity.

Q: 10. What is the required depth (overhang) for the desk clamp? Not the thickness.

A: This is not a published specification. Looks to be about 2 inches.

Andrew	28/08/2024
[Aluminum] I used this to arm to mount a 31 LG OLED monitor. I drilled a hole in my desk rather than use the included clamp. This went smoothly and the LX arm was easy to mount. It's nice having space under the monitor now! The cable channel and tie-wraps worked well to cleanly get the cables draped over the back of the desk without touching the desk. Nice hex tools are included, as are a nice assortment of screws for attaching the monitor. It is easy to adjust the tension to get the weight right and it's easy to move the monitor around. I wish there was also an adjustment for resistance. I have a super light OLED monitor and would like to move it with a little less force. I'd still give this arm a 10 out of 10. It is well engineered. 5

Charlene	24/08/2024
[10.75 lb] The price and quality made this the perfect choice for our bench jeweler. He adapted it to hold his binocular microscope he uses for stone setting. 5

Michael	15/08/2024
[Aluminum] Over the years I've purchased many arms from Ergotron. This one lives up to the quality I expect from them. Holds my HP Z32 Dreamcolor monitor in any position I put it in. Super easy to install. 5

anyonymous	15/08/2024
[10.75 lb] Definitely pleased with the quality of this item. The movement and mounting accessories were better than expected. 5

Dan	08/08/2024
[10.75 lb] Its perfect. I use this monitor arm for my Jimmy Jib camera crane. 5

Robert	02/08/2024
[27 x 8.6 x 7"] I wanted a monitor support to replace the stand that came with my monitor which just took up too much desk space. I have used the Ergotron monitor arms in a factory setting and they held up perfectly. So this was my first choice for home. I know they are strong and will not sag over time. The adjustability is excellent and assembly is easy. Best monitor support out there. 5

Chandler	17/07/2024
[Aluminum] Easy to set up, holds my monitor exactly where I want it! Perfect for me. Worth it 100% 5

David	16/07/2024
[27 x 8.6 x 7"] Purchased two of these and made my workstation so much easier to use. 5

Yenraf	03/07/2024
[10.75 lb] Mounted an Acer Predator X34 Ultrawide monitor on this and was a bit worried that the weight would be a bit much. It holds this beast wonderfully with no issues. It is very well built from high quality materials and is just what I was looking for. 5

Sharon	13/06/2024
[10.75 lb] Seems very sturdy. Love the extra desk space that an arm provides. Comes with hardware to clamp it or put it through a grommet hole. Had to watch the video a couple of times to get it adjusted, but was reasonably easy to install. Has a clean look. I do miss a feature on a previous arm that lets me take the monitor off the arm while it's on the desk without any tools, but this one holds a larger monitor so maybe it's impractical. 5