Ergotron Ds100 Outboard Pole Clamps Set Of 2

Product Code: eq24696
Availability: In Stock

$645.00 $922.35

Qty

19 reviews Write a review

Description
Reviews (19)

The set of two, black Ergotron DS100 Outboard Pole Clamps Set of 2from Ergotron DS100 Outboard Pole Clamps Set of 2offers stability for expanded, multi-display configurations. It attaches a 55" wide crossbar to two base/pole assemblies.

Parameters
Recommended	Use with Long Crossbar Extender (97-447-200), which is 55.0" (139.7 cm) wide
Packaging Info
Package Weight	2.65 lb
Box Dimensions (LxWxH)	11.5 x 4 x 2.5"

Used to integrate two bases into a single monitor array to increase stability

Lever mechanism allows easy placement of clamp at any point along pole

Related Questions and Answers

Q: 1. Digital Juice Butterfly C-Stand Frame Clamps (Pair)..will the work with a Westcott Scrim Jim 4x4? The frame is wider on these than the original westcotts scrims.

A: I use these clamps with 4x4 scrim jim cine frames. They are a bit beefy for the job but they are solid. The clamps manage to fit in a cstand arm or knuckle but not very well, they are large and more suited to a roller. They are also bulky to transport but I feel it's worth it. I'm happy they can hold a larger frame should I need a 6x6 or an 8x8.

Q: 2. Will these fit the Savage C-stands?

A: The Inovativ C-Stand Storage Clamps (Set of 2) BH #IN500726, supports C-Stands that are up to 1.25'' in diameter.

Q: 3. The specs state length as 110mm but in one of the photos it has 90mm, which is correct? Will this work on C200?

A: The SmallRig Mounting Plate with Dual 15mm Rod Clamps is 90mm tall, 110mm in length and 32mm across. The SmallRig Mounting Plate with Dual 15mm Rod clamps is a universal solution that would work with many camera models including the Canon C200.

Q: 4. How do you attach this to an LX Mount? The ergotron website says it is compatible so I assume I can clamp this around a c-stand that's 1.5" and then attach the ergotron LX somehow to it? Here's the link to ergotron's site that says it is compatible with LX arms... https://www.ergotron.com/en-us/products/product-details/60-420#/ ...

A: Please contact Ergotron directly for installation instructions: Ergotron: Tel: 800-888-8458 Email customerservice@ergotron.com

Q: 5. What is the maximum size of square tubing this clamp will accept. 1X1 inch? 1.25 X 1.25 inch?

A: These clamps accept a thickness of 1 x 1 inches.

Q: 6. Will these work with Proaim Victor cart?

A: There is a good chance of compatibility using the Inovativ C-Stand Storage Clamps (Set of 2) with the Proaim Accessory Cross Bar for Proaim Victor & Atlas Camera Production Carts on the Proaim Victor V1.1 Video Production Camera Cart (42"). Proaim replicates Inovativ designs.

Q: 7. What are the little black screw sizes?

A: The small black screws that are included with the SmallRig Mounting Plate with Dual 15mm Rod Clamps are M4 screws.

Q: 8. Is this a 1510 or 1610 case? The description lists both.

A: This case had outer dimensions of 22 x 14 x 9", meaning it is a 1510 case.

Q: 9. what are screws to attach to crossbar? on last 2 pictures they look like the tightening knobs but product pic looks different

A: The mounting hardware is included but they do not list its specs for the Inovativ C-Stand Storage Clamps (Set of 2) BH #IN500726.

Q: 10. Is this baseplate compatible with the Falcon F38 quick release plate? Or only the F50? I’m using Arca Swiss but need rails

A: The Falcam F38 QR plate is much smaller than the F50 and because of this, it is not compatible with the Falcam Baseplate with Dual 15mm Rod Clamps.

Nina	17/08/2024
[2.65 lb] I needed some way to have 4 monitors without placing something behind the bottom 2 monitors to keep them higher than the bottom ones. Saw this and knew this would do the trick. Received it and installation was easy. I have (2) 25" monitors on the bottom and (2) 17" monitors on top. Holds up well. No uneasiness that it might fall. Just make sure you have the top monitor attachment angled down. You will see that the brackets that connect to the back of the monitor are angled. I mounted the top monitors and realized that I need to angle them downward. But once i made that adjustment, it worked out perfectly. 5

Steven	12/08/2024
[2.65 lb] works great for my application 5

David	11/08/2024
[11.5 x 4 x 2.5"] What can I say, I love Falcam products. I'm able to set up and break down my camera rig in no time at all b/c of how I have my rig setup. 5

Janice	04/08/2024
[2.65 lb] I was on the fence about this plate. There are other plates similar but SmallRig tops them all. I have the rods and a cage so this plate made sense. Always good quality and fast shipping. I buy everything SmallRig 5

Robert	29/06/2024
[11.5 x 4 x 2.5"] Work very well with our American Grip C-Stands 5

Juan	19/06/2024
[2.65 lb] I added the SSL Fusion to my Digico Quantum 338's master chain and what this gears di to my mix is insane, for good! Texture, color, warm, beautiful saturation. Is like having a final mastered record but in real time. Follow me @donjfelix if you want to see it in action 5

Gregory	15/06/2024
[11.5 x 4 x 2.5"] Works really well for routing cables around my rig and cage. Get several. They are easy to use and hold the cables securely. 5

Jesse	12/06/2024
[11.5 x 4 x 2.5"] I love the Falcam system and this is just another amazing addition. Quick, easy to use, and allows me to rig out my camera for the longer shoots where I need more battery life and equipment (mic, audio recorder, etc). 5

Jonathan	24/05/2024
[2.65 lb] Falcam makes solid rigs for small cameras. Will see how they hold up over the years but well designed and easy to use. 5

Hugh	21/05/2024
[2.65 lb] I purchased four of these to make my own quick release assemblies for four different camera setups. They are heavy duty and when accessorized with Manfrotto, Axler or any other quick release plate system you have an instant setup for pretty much any camera you decide to use. I've attached rods to all four of my setups and in about thirty seconds I can modify it as a shoulder rig system with a Shape offset forward handle and shoulder pad attachment or a sophisticated tripod mount system ready for any accessory to attach to the rods or the various cages I've purchased from B&H. I've literally saved a bundle building my own rigs piecemeal with this product. I like it so much I've purchased four. 5