When your multi-pair audio system must meet the demands and abuse of everyday use in the studio or on the road, Pro Co Sound RoadMaster 28 Channel Stagebox 150'meets and exceeds those durability requrements.

RoadMaster fanout cables are individually protected with their own color-coded, shrink-tubing jacketing that provides a long cable lifespan and excellent flexibility.

Each RoadMaster stagebox is built from a heavy-duty 16 gauge steel connector panel and 12 gauge U-channel enclosure to withstand the roughest of treatment. The stagebox is wired with Pro Co Duralink multipair wire to a fanout of cables, safely secured to the box with a tough wire mesh cable grip.

Color-coded cable terminations for easy identification

Related Questions and Answers

Q: 1. What gauge is the cable?

A: The wire is a standard 28 gauge which is what fits the RJ45s/NE8 connectors. It is 350 Meg wire

Q: 2. How effective is this on a vocal condenser mic? I want to put this mute switch in line between the mic and an affects processor which will supply phantom power.

A: It works quite well. I use a Shure SM35 headset mic when playing my electric upright and use this to kill my mic when I'm not singing. It works great with external phantom power. It does suck batteries, though, if you have it off a good bit. I go through a 9v Duracell Quantum battery every 1.5 gigs. However, when the power dies, it defaults to the mic being on, so you don't lose your mic in mid-set if the battery dies. If you're using a powered pedalboard or can run from the wall wart, you'll be fine. Switching is quiet, so you don't even notice when you turn the mic on and off. Overall, it's a great pedal and I use it every week.

Q: 3. Is this compatible with the input and output connectors on AJA KiPro 12G?

A: The Pro Co DA88XF-5 can be used to connect eight XLR audio outputs from a mixer to the DB25 input on the AJA Ki Pro Ultra 12G. You would need a cable with DB25 to male XLR connectors to connect the DB25 output from the AJA Ki Pro Ultra 12G to the XLR audio inputs on a mixer, recorder or other audio input device. B&H # PRDB258XM5 is the same type of Pro Co cable with male XLR connectors.

Q: 4. What are the dimensions of the XLR box itself? Specs say 19" x 19" but that seems way too big. The picture looks more like 8" x 8" or 9" x 9". Can you verify?

A: I called and Woody at Pro Co looked it up; it's 7 x 7 x 3"

Q: 5. The description says the snake has XLR returns, but the photo shows TRS returns. If I order this, which version will I get? Thanks!

A: thank you for your question. The photo in the listing is a representation of the chassis for the snake. If you purchase this item, the snake you will receive will have XLR returns.

Q: 6. Could I get a 24x Send + 4x 1/4" TRS Stereo Phone Male Return 25' ? Thanks . . .

A: This model: B&H # PRSFB24X4P50 has 24 sends and 4 1/4" trs returns.

Q: 7. Does phantom power pass thru this without issue from the input to the direct out?

A: My guess is if you turn on phantom on one mic pre only, it ought to work... (Phantom power comes from a mic pre, connected to one of the 2 outputs) Contact Pro Co to confirm: Pro Co Sound Tel: 800-253-7360 or 269-388-9675 Website http://www.procosound.com/ Email info@procosound.com https://www.bhphotovideo.com/c/product/393443-REG/Pro_Co_Sound_MS42A_MS_42A_4_Channel_Microphone.html/specs

Q: 8. What brand of speakon connector is used on this cable?

A: The ProCo S12NN-50 features Neutrik 2-pole Speakon connectors.

Q: 9. will this work for phantom power?

A: Phantom power is able to be transmitted between 2 devices by any XLR cable.

Q: 10. Do you pseudo design these to make them balanced cables? Soldering the (-) to the ground ?? I have klark teknik dn 504 quad compressors and need at least six of these cables re-configured.

A: We cannot offer modification advice.