The SWIT S-2041F LED On-Camera Light with Battery Plateuses chip-array LED technology to provide a soft, bright light with minimal glare. This 5000K light is switchable to 3200K or 5600K by using the attached, hinged orange or blue filters. A front-mounted dial enables dimming from 10-100%. The light comes with the S-7004F interchangeable battery plate, making it compatible with Sony NP-F970/770 and SWIT S-8972, S-8970, S-8770 batteries. It can also be powered using the included D-tap to 5.5mm cable.

This LED light offers a 60° wide beam angle, an illumination of 1200 lux at 3.3', and a CRI rating of 85. Its output is equivalent to a 100W halogen bulb at 5000K with a power consumption of 23W. The light mounts to your camera via its cold shoe plate or its 1/4"-20 threaded screw.

100W Equivalent Light Output    5000K and 5600K/3200K Switchable Output    10-100% Dimming    23W Power Draw    1/4"-20 Screw & Cold Shoe Mounts    On/Off Rocker Switch    D-Tap Cable Included    1 x Blue, 1 x Orange Hinged Filters    2 x Hinged Barndoors

LEDs remain cool while producing a soft, bright light with minimal glare

Can be powered using the S-7004F interchangeable battery plate or the D-Tap cable

Compatible with Sony NP-F970/770 and SWIT S-8972, S-8970, S-8770 batteries

5000K color temperature with 5600K and 3200K options using hinged filters

Dimmable from 10 to 100% using the built-in dial

Attaches to camera by using either 1/4"-20 screw or cold-shoe mount

Related Questions and Answers

Q: 1. Is this just for videos? or for macro/portrait photography

A: You can use this light for photo or video.

Q: 2. I just purchased two (2) ANDYCINE 35-LED Mini On-Camera Lights (Nikon EN-EL15). But neither of them have 4-step dimming as listed in the description. Did I get defected ones? I had them plugged into a wall outlet in case that makes a difference since I don't have Nikon EN-EL15 batteries.

A: Four step should be inherent to the light fixture regardless of the type of power device being used for powering the unit. There may be a product defect if these four step options are not accessible.

Q: 3. Would this work with Arri cameras?

A: Hey Josh, yeah I use it with all the Arri cameras. Basically as long as you have a female v-lock on the back of your camera then you can convert it over to Goldmount batteries instead.

Q: 4. Is this light compatible with the element lighting board?

A: The SWIT S-2320 160W Bi-Color Studio LED Spot Light supports DMX. It has 5 pin dmx ports.

Q: 5. How does it attach to the camera? Can you provide an image of the bottom of the foot?

A: Included in the package with this light is a cold shoe mount. You will be able to connect it to a camera using that cold shoe mount.

Q: 6. Can i use it on other cameras, apart from Panasonic? and with batteries other than Sony?

A: This Battery Plate Adapter is designed to use V-Mount Batteries on Panasonic Cameras that have a Gold Mount Plate. It may still be possible to use it on cameras that have a gold mount plate which are not Panasonic though.

Q: 7. Can this light adapter be useb with another DMX transmitter than the SWIT pocket controller? For example the Blizzard wiCICLE?

A: The SWIT Light Adapter BH #SWLAWR8R are only for use with the SWIT Pocket controller. BH #SWLAWR8KIT

Q: 8. Is this a CRMX receiver or some other flavor of radio reception? Maybe SWIT proprietary?

A: No, the SWIT Light Adapter is not a CRMX receiver. This adapter is designed to be paired with the Swift Pocket controller.

Q: 9. It can connect staller app directly?

A: This adapter works in conjunction with the Swit LA-WR8 controller.

Q: 10. Can this work with the Lumen Radio 8 universe StarDust?

A: Yes, the Lumen Radio 8 universe StarDust can be configured via web portal and transmission of sACN and Art-Net which the swit light adapter is based on "ARTNET" protocol system.