Cambo 60Mm Quick Release Plate

Cambo 60mm Quick Release Plate

Product Code: eq24907
Availability: In Stock

$228.00 $328.32

Qty

13 reviews Write a review

Description
Reviews (13)

This Cambo 60mm Quick Release Plateis compatible with most Arca-style clamps. It is 60mm long and has a 1/4"-20 threaded camera mount screw.

Arca-Type Compatible Length: 60mm

Parameters
Length	2.4" / 60 mm
Camera Mount Thread Size	1/4"-20
Packaging Info
Package Weight	0.15 lb
Box Dimensions (LxWxH)	6.75 x 4.75 x 1"

Related Questions and Answers

Q: 1. Does this plate have a screw hole at the front for lens support?

A: No, the Manfrotto Quick Release Camera Plate does not have a screw hole at the front for lens support.

Q: 2. Will this work for the EH60 tripod?

A: No. It's a hair too thin and doesn't lock.

Q: 3. Does this plate have just one screw or two?

A: The P20 plate (3.68 inches long) is packaged with two (2) 1/4 inch button head mounting screws (of which 1 is needed to connect the plate to the tripod collar foot. It also comes with four (4) M3 x 6 mm socket head cap safety screws of which two (2) are needed to prevent the plate from sliding off an Arca-Swiss-compatible ball head. The package also contains 2 hex wrenches - one for each type of supplied screw. The supplied instruction sheet shows different ways of using the safety stop screws to minimize twisting as well.

Q: 4. What is the diameter of the bottom portion of this mount, the portion that attaches to the tripod?

A: The base diameter of the Manfrotto MOVE quick release plate is 2.36 in.

Q: 5. What are the dimensions of this ballhead?

A: The Cambo CBH-6 Ball Head height is : 4.5" (210.0mm).

Q: 6. Will this fit my 63 sunpak travelite pro reverse folding tripod? How about the 60 lightweight amazon tripod? I have both tripod but I want to make sure this will fit to any of those. Im getting this quick release with the photek tri-x-2500 tripod extender.

A: Sorry, no this is a 3rd party version of at Manfrotto 200PL Quick Release Plate and will not fit the Sunpak DigiPro Ultra 63 Reverse Folding Aluminum Tri-Monopod B&H # SUDU63RFT. You might try Sunpak directly but they do not list plates on their web site. https://bit.ly/2LYEacaYou could get this plate and it will work. Jobu Design Arca-Swiss Adapter 1/4 -20 B&H # JOAAS250. Or this one, a little bigger. Oben QR-10 Quick Release Plate B&H # OBQR10.As to the 60 lightweight tripod, please contact the company you purchased it from.

Q: 7. Is it compatible with RRS clamps ?

A: Yes it should be except for the RRS lever-release clamp. RRS are Arca-Swiss compatible so the Wimberley P-20 should work just fine.I copied this from the RRS website if you want more info:There are a number of mail-order companies that sell gear based on the Arca-Swiss quick-release standard. In addition to Really Right Stuff, companies such as Wimberley, Markins, AcraTech, Foba, Novoflex, and Kirk sell gear that is commonly marketed as Arca-Swiss style or Arca-type or Arca-Swiss compatible. In general, most of this gear is cross-compatible (but many Novoflex plates do not fit our screw-knob style clamps). For example, a Really Right Stuff L-plate will work just fine with the quick-release clamp on your Markins ballhead. And your Wimberley lens plates will work great with any Really Right Stuff clamp and ballhead. An exception to this is our lever-release clamp; read more about our lever-release clamp compatiblity here. Really Right Stuff plates do not work with any Manfrotto, Bogen, or Gitzo quick-release clamps. Those companies have their own proprietary quick-release systems. They are not Arca-Swiss compatible. Only Manfrotto plates work with Manfrotto clamps. Only Bogen plates work with Bogen clamps. Only Gitzo plates work with Gitzo clamps.

Q: 8. Is the P20 plate suitable for the Canon EF300 f2.8L IS II lens?

A: Yes, the P20 plate is the proper plate for that lens.

Q: 9. Would this plate fit perfectly tight (That is no play at all) to the Arri Broadcast plate for Canon C300 MII?

A: While we have not physically tested that exact pairing, that plate is specifically designed for VCT style tripod adapters.

Q: 10. This plate is compatible with the 7060H E-Image tripod head ?

A: I have to give credit to Ikan, D&H forwarded me to them. Here is the answer from them. You will have to find out when your 7060H was manufactured.You can tell by looking on the head and finding the serial number. If your heads serial number is H1508XXX or higher, then you need: Model GP1If your heads serial number is lower than H1508XXX, then the plate you need is : EH6P Hope this helps! So yes if your tripod serial number is lower than H1508xxx then this plate is compatible.

Jim	27/09/2024
[0.15 lb] Please pay particular attention to the little metal loops at the ends of this plate...the ones that look just like strap lugs. I own a Nikon 80-200 f/2.8D lens, the one thats made out of metal and weighs a ton. If your strap is on the body, that massive lens is going to put a lot of torque on the mount. (Canon also makes lenses with this problem.) This plate lets you put a strap on the lens, which solves the issue. This is the first Arca plate Ive seen with strap lugs, and Ive got a bunch of them. 5

Wayne	19/09/2024
[0.15 lb] this is a great value. 5

Greg	14/09/2024
[1/4"-20] Nice, solid, narrow Arca-type mount. The narrow shape makes for an unobtrusive plate when left on, and the bolt pattern on the plate allowed me to use a second screw to dual-fasten the plate. 5

Dave	11/08/2024
[1/4"-20] This plate has multiple slots for positioning to clear battery doors underneath Canon Rebels and probably other cameras. The finish is excellent. And the strap slots allow me to mount a hand strap on the right, and a neck strap on the left. The neck strap on the side makes the camera hang with a more natural position when suspended from the neck, especially with longer lenses. This setup also works well to carry the camera with the strap on the shoulder. The rubber pads on these plates work very well to keep the plates from twisting. I have these plates on 4 cameras that get regular use, on and off of tripods, and have not had any problems with them twisting loose. 5

Jesse	09/08/2024
[2.4" / 60 mm] I have used different plates, but this one is compact, light weight, feels very solid, and has supported my camera lenses and spotting scope perfectly. If you have two tripod mounting holes in your equipment (as does my spotting scope), buy an extra 1/4-20 mounting screw; it will really help to prevent the scope from rotating on the base. MUCH better quality than Delkin Devices Fat Gecko DSLR Camera Mount Quick Release Plate. 5

Jason	08/08/2024
[1/4"-20] I add this to all my support gear. I now have a standard plate that fit on all my tripods, monopods and holster. 5

Jan	14/07/2024
[0.15 lb] I keep an arca swiss plate on my cameras at all times and needed a clamp for a new tiny (like 10) tripod I bought on sale. This clamp works perfectly - and was the right price. I'm glad B&H once more came through the the merchandise I needed! 5

Scott	12/07/2024
[1/4"-20] This Camvate plate and clamp are made of metal which is nice. Plate mounts to camera nicely. Also like that it’s pretty wide at 6cm. The plate is solid too and the built in levels are nice. The whole assembly holds my Nikon DSLR and big lens securely. 5

Trihuy	12/06/2024
[0.15 lb] Plate quality is just as expected, although it takes months for delivery. I can now use both hand grip and a sling strap for the camera. 5