The SWIT S-3602D Dual Charger for Panasonic Batterieshas two charging channels with 7-8.4 VDC, 2A output each for simultaneously charging two batteries. It is compatible with the SWIT S-8D58/S-8D62 and Panasonic VW-VBD58 and CGA series D54 and D28 DV batteries. Four-level LED charging indicators for each channel indicate the percentage of charge remaining.

The dual charger also has two 5.5/2.1mm DC pole sockets to provide 8.4V, 3.5A (total) DC adapting output. Both channels can simultaneously provide DC output to the connected cameras/accessories or one channel can be used to charge a battery by dropping it in, while the other can be used to adapt to a camera/accessory.

For SWIT S-8D58/S-8D62    For Panasonic VW-VBD Series    2 x Battery Bays    Simultaneous Charging    Status LEDs

Two-channel simultaneous charging

Compatible with SWIT S-8D58/S-8D62 and Panasonic VW-VBD58 and CGA series D54 and D28 DV batteries

Two 8.4V, 3.5A (total) DC adapting output sockets

Four-level LED charging indicators

Related Questions and Answers

Q: 1. Approximately how fast will it charge a BPU30?

A: This list a charging time of approximately 3 hours for single battery and 5 hours for 2 batteries.

Q: 2. Does supplied DC power cord work with Sony FS5 camera?

A: The DC power cord works for all PXW series cameras including the FS5.

Q: 3. Anyone know cheap way to get this (any B-mount) mounted to pole or a non-electronic V-mount for d-tapping a light?

A: The B-mount battery type is a brand new form factor and because of this there isn't currently an inexpensive option. I can recommend adapting the B-mount to V-mount with the Bebob B-Mount Battery Adapter for V-Mount Camera and then using the CAMVATE Universal Super Crab Clamp with T-Handle and V-Mount Battery Lock to mount to a light stand, so that the battery can be used with the light via D-Tap.

Q: 4. Will charger work as power supply for Sony FS5 camera? I ask this noting that aside from physical connector, FS5 requires regulated 12v DC input.

A: It will not. This DC output is for Sony PMW series cameras, which have a different connection over the FS5.

Q: 5. Will this work with a JVC GY-HM620 camera?

A: Yes. This item BH #SWS3602I will work with the battery that is used on the JVC GY-HM620 camera. See the link to the battery below. The battery is compatible with the following JVC camera GY-HMQ10, HM600, HM620 and HM650 JVC camcorders https://www.bhphotovideo.com/c/product/860505-REG/JVC_SSL_JVC50_BATTERY_f_GY_HMQ10U_GY_HM600.html

Q: 6. Will this supply AC power to the JVC GY-LS300?

A: This would supply power to the JVC GY-LS300. It uses the JVC50 batteries.

Q: 7. Does this charge SWIT S-8972 batteries? I know it says it in the B&H description but on the manufacturers manual it doesn't list the battery as "Applicable"

A: Yes it does. SWIT S-8972 is a Sony L or NP-F style battery, which is the kind of battery this charger works with. https://bhpho.to/2YowoyO

Q: 8. Does this have swing out feet to prevent it from tipping over when batteries are being charged?

A: Yes, the SWIT 2-Channel Simultaneous Charger for V-Mount Batteries does have swing out feet to prevent it from toppling over when batteries are being charged.

Q: 9. Is this compatible with the large IDX BP-U 96Wh batteries?

A: Compatibility for this is explicitly defined as being for smaller to 5200mAh batteries.

Q: 10. What kind of ports are on this charger: USBA or USBC? And what's the purpose of two ports?

A: The Rotolight NEO 3 Dual Charger and Batteries Bundle has both USB Micro type B and USB C, which allow you to power from a portable battery with the means that you may have at the time, which allows for greater flexibility in the field for instance.