The black Chief RPA318 Custom Projector Mount - Blackfrom Chief RPA318 Custom Projector Mount - Blackis a ceiling mount for select ASK Proxima and EIKI projectors. The mount allows you to easily connect/disconnect your projector for convenient access to the lamp and filter and is able to maintain the registration and the preset adjustments when disconnected. There are multiple installation options, including a flush mount to ceiling, 0.25" threaded rod, or a 1.5" NPT threaded extension column. The mount also provides cable management through an opening at the top of the mount, making additional cable accessories unnecessary. To protect against theft, there is All-Points Security steel-into-steel locking hardware at all of the important connection points.

Independent roll, pitch and rotation for quick and precise projector registration

Maintains registration when disconnected

Quick connect/disconnect for convenient lamp and filter access on most projectors

Disconnection does not affect preset adjustments

Uses all-points security steel-into-steel locking hardware at all key connection points to protect against theft

Multiple installation options

Organizes cables without the need for additional cable management accessories

Related Questions and Answers

Q: 1. Can I mount an 80 monitor on one of these stands??

A: This mobile cart can support up to 200 lb (90.7 kg). It must be used with an interface bracket like this one or similar from CHIEF: Chief PST-16 Flat Panel Fixed Wall Mount (Up to 65 or 200 lbs) B&H # CHPST16 OR: Chief PSBUB Universal Flat Panel Interface Bracket (Black) B&H # CHPSBUB To confirm the compatibility of this mount with your flat panel TV or monitor, visit Chief's MountFinder Pro.a href= http://www.chiefmfg.com/ target= _blank http://www.chiefmfg.com//a

Q: 2. How big can the white board be, top to bottom?

A: AThe Chief OB1U Over-Whiteboard Interactive Display Mount BH #CHOB1U accommodates typical large displays between 42 to 100” and VESA® up to 1020 - 500 mm. (Specify CHIEF FHB7036 or FHB7037 to extend to VESA 1020 x 600 mm) Heavy-duty weight capacity of 310 lbs (140.6 kg) Display height adjustment range of 26” (660 mm) When installed, mount allows for a minimum of 4” (102mm) clearance from wall Overall Dimensions (H x W x D)61.1-75.1 x 55.25 x 6.3” (155.2 – 190.8 x 140.3 x 16 cm)

Q: 3. Would this work with the Fotopro E6H Gimbal? I'm using an Olympus 300 Pro lens that has a foot built in

A: Yes this can work when using the Fotopro E6H Gimbal depending on the plate being used.

Q: 4. Can i mount an ASUS 34in monitor that ways 24.7 lb / 11.2 kg to this stand?

A: Please note the weight restriction listed below:The ASUS monitor needs to offer one of these compatible VESA mounting standards: 75 x 75mm / 100 x 100mm Compatible Supports Displays Up to 22 lb.

Q: 5. I am looking for a solution that will allow me to point my projector straight down onto a table. Will this bracket allow this?

A: The Kupo Universal Projector Mount (BH # KUKD303112) will allow for flexible 360 degree and vertical orientation with laser or LED projectors.

Q: 6. What are the options for using this in conjunction with a full articulating wall mount?

A: Typically you don't need this with a full articulating wall mount because the arms cause a gap between the back of flat screen and the wall. It can be used either way with or without articulating. just gives more space behind between the cavity of the studs

Q: 7. Do all the casters lock or only two of them?

A: Two of the casters can be locked to ensure the cart stays securely in place once positioned.

Q: 8. How can I mount this to a Manfrotto Heavy Duty Gimbal? I'm using the shoe it comes with and a Canon 100-400mm lens. https://www.bhphotovideo.com/c/product/554099-REG/Manfrotto_393_393_Heavy_Duty_Gimbal.html

A: Unfortunately, the Custom Brackets Tilt Head Flash Mount is not compatible with the Manfrotto Heavy Duty Gimbal. It could only be used with gimbal heads which offer an Arca type quick release plate.

Q: 9. Can you change the lens

A: This is just a mount for putting up a projector - no lens involved in this product.

Q: 10. KUPO's website gives conflicting capacities for this mount. "Up to 33lbs" & "Maximum Payload Capacity: 15lb" Which is correct?

A: The Kupo website has a typo for the load capacity specification of the Kupo Universal Projector Mount (B&H # KUKD303112). It should read 15 kg instead of 15 lb. 15 kg equals 33 lb.