Tv One C2-2655 Universal Scaler Plus Device

Product Code: eq25458
Availability: In Stock

$6,249.60 $8,436.96

Qty

11 reviews Write a review

Description
Reviews (11)

The TV One C2-2655 Universal Scaler Plus Devicefrom TV One C2-2655 Universal Scaler Plus Deviceallows you to convert just about any type of video signal to just about any other signal with less than two frames of latency. It can support resolutions up to 1920 x 1200 at 60 Hz and will accept as well as output composite, component, VGA, DVI, and HDMI, plus can output only via SDI. Additionally, analog audio inputs and outputs allow stereo audio to be embedded or de-embedded from digital video signals. On top of scaling and frame rate conversion, the C2-2655 can also act as a 3 x 3 matrix switcher allowing you to route any of the inputs to any of the outputs.

Up / Down / Cross Conversion Frame Rate Conversion & Pulldown Support DVI, HDMI, Analog In / Out + SDI Out Keying and Custom Resizing Possible Genlock for Seamless Video Switching Auto-Switching with Input Detection Audio Embedding / De-Embedding OSD, IP, and RS-232 Control Options Seamless Cut, Fade or Wipe Transitions Rack-Mountable with Optional Kit

Parameters
Inputs	Video 1 x Composite on BNC 1 x S-video (Y/C) on 4-pin DIN 1 x HDMI 1 x DVI-U: Supports composite, component (YPbPr, YUV), HDMI, DVI, VGA (RGBHV, RGBS, RGsB) - adapters required Audio 3 x Unbalanced audio on terminal connectors 1 x Stereo 3.5 mm mini jack Note: HDMI and DVI-U pass embedded audio
Outputs	Video 1 x Composite on BNC 1 x S-video (Y/C) on 4-pin DIN 1 x HDMI 1 x 3G-SDI on BNC 1 x DVI-U: Supports composite, component (YPbPr, YUV), HDMI, DVI, VGA (RGBHV, RGBS, RGsB) - adapters required Audio 1 x Unbalanced audio on terminal connectors Note: HDMI, SDI, and DVI-U pass embedded audio
Maximum Resolution	Analog Computer: 1920 x 1080 Analog Video: 1080p60 HDMI and DVI Computer: 1920 x 1200 HDMI and DVI Video: 1080p60
Supported Resolutions	Video: NSTC, PAL, 720p,1080i,1080p Computer: 800 x 600 (SVGA) to 1920 x 1200 (WUXGA)
Supported Frame Rates	SD-SDI 525i (NTSC) 59.94 Hz 625i (PAL) 50 Hz HD-SDI 720p: 29.97, 30, 50, 59.94, 60 Hz 1080i: 50, 59.94, 60 Hz 1080p: 23.98, 24, 25, 29.97, 30 Hz 1080p: 50, 59.94, 60 Hz
Latency	1 to 2 frames
Standards
Supported Standards	Analog Video NTSC, PAL, PAL-M, PAL-N, SECAM Component Video RGBHV, RGBS, RGsB, YPbPr, YUV HDMI and DVI DVI 1.0, HDCP; CEC pass-through SDI SMPTE259M-C (SD-SDI; 270 Mbps; 525/625Line) SMPTE292M (HD-SDI; 1.485/1.4835 Gbps: 720p, 1035i, 1080i, 1080p) SMPTE424M (3G-SDI) Audio De-embedding Support: 1 x Stereo pair at 32, 44.1, or 48 kHz from HDMI / 48 kHz from SDI Embedding Support: 1 x Stereo pair at 48 kHz
SDI Jitter	SD-SDI: < 0. 1 UI HD-SDI < 0.2 UI 3G-SDI: < 0.3 UI
SDI Cable Equalization	No SDI input
General
Control Method	Local: Front Panel Buttons and OSD 1 x RS-232 on DB9 female 1 x Ethernet on RJ-45 connector
Power Requirements	External Power Supply: 12 VDC at 1.5 A
Operating Temperature	32 to 104°F / 0 to 40°C Humidity: 10 to 85%, non-condensing
Storage Temperature	14 to 158°F / -10 to 70°C Humidity: 10 to 85%, non-condensing
Dimensions	1.6 x 8.6 x 7.4" / 42 x 218 x 189 mm
Weight	2.8 lb / 1.3 kg (excluding PSU)
Packaging Info
Package Weight	4.58 lb
Box Dimensions (LxWxH)	13.65 x 13.1 x 3.9"

The C2-2655 features inputs and outputs to cover just about any scenario:

Inputs: HDMI, VGA , composite, DVI-U, a stereo 3.5mm mini jack audio input, and three analog audio inputs on terminal connectors
Outputs: SDI with 3G-SDI, HD-SDI, and SD-SDI support, HDMI, composite, DVI-U, and one analog audio on a terminal connector
DVI-U: DVI-U is a combo connector that will pass HDMI, DVI, VGA, component, or composite video signals as well as embedded audio where applicable. An adapter will be required to connect any devices that do not use DVI connectors

The Auto-Switching function allows the user to connect video source and have its image automatically displayed on screen without having to press any buttons. The incoming resolution is quickly detected and analyzed, meaning within a few seconds the user is up and running and ready to present. This is particularly useful in situations where there is little or no technical supervision, such as in meeting rooms, medical environments, teaching spaces, or live staging events

Note: Please ensure you are updated to the latest firmware to enable this feature

In addition the built-in OLED screen and OSD menu system provided for local operation, RS-232 and IP control are supported by C2-2655. RS-232 allows third-party wired remotes and control systems to be used; while IP control allows the device to be operate from a computer connected to the same network. Control and configuration software for Windows is included

Keying: allows one input to be keyed over a second input. The keyed image may be faded in and out. Precise keying at the pixel level is possible due to 4:4:4 sampling format when using RGB video sources
Transitions: permits Seamless Cut, Fade, or Wipe transitions when switching between input sources
Picture-in-Picture (PIP): allows an input to be inset in a window over a second input or vice versa; the PIP window may be placed anywhere on the screen
Genlock: synchronizes video sources internally to ensure seamless switching

Switching: an internal routing switcher allows any one of the four analog audio inputs to be routed to the analog audio output regardless of impedance. Each audio input is assigned to a video input, allowing audio to follow video when switching

Embedding and de-embedding: embedded audio support allows any audio input to be embedded on all outputs, which support embedded audio data (HDMI, DVI-U, and SDI)

Size and Position: automatic via Calibrate or manual
Image Size: user-definable presets
Image Freeze: one video frame
Settings Memory: non-Volatile
Zoom Range: variable to 10x Zoom
Shrink Range: variable to 10%
Image Mirroring: horizontal and/or vertical
Horizontal Filtering: full digital
Conversion Technology: CORIO2
Framerate Conversion: temporal
Color Resolution: 24-bit (16.8 million colors)
Sampling Rate: 162 MHz
Digital Sampling: 24-bit, 4:4:4 or 4:2:2 format, depending on input source
Firmware Memory: flash upgradeable via RS-232 or IP
Video Encoder and Decoder: 8-bit digital
De-Interlacing (NTSC/PAL): pixel-level motion adaptive, diagonal interpolation
Film Mode (NTSC): 3:2 pulldown
Maximum Latency: 1 to 2 frames
Video Adjustments CV/YC: Contrast, Brightness, Saturation, Hue (NTSC), Analog RGB/YPbPr levels

Related Questions and Answers

Q: 1. Can the tray be adjusted to a 90 degree angle?

A: Yes you can fix the tray on the Pyle PLPTS2 to a 90-degree angle to the stand.

Q: 2. Supports Livestream Sutudio software?

A: Yes, Magewell lists support for Livestream with their USB capture devices.

Q: 3. Support 1080! 50/60?

A: Yes, the Magewell USB Capture SDI Plus, One-Channel 2K Capture Device supports both 1080p 50/59.94/60: Captured as 1080i 50/59.94/60

Q: 4. what exact camera model would this work on?

A: This is meant for use with Canon EOS C Cameras, This would include the C100, C300 and C500. It might possibly include the 1D C.

Q: 5. How much does ONE of these device stands weigh?

A: One Pyle PLPTS2 stand is 5.76lbs.

Q: 6. can you put in the specs and overview of this item? I can't tell what it is made out of or if all the parts included in the picture are included.

A: The manufacturer is reticent as to the specs and any over all description of their product. We can say that the main material is aluminum and everything you see should be in the box. If not, please contact B&H Customer Service.

Q: 7. Does this device get overheat after 4 hours? I can't see any vent system

A: We are not aware of any overheating issues. This can even operate between 32 to 122°F. There are no vents, but the heat sync within the unit helps.

Q: 8. What is the video latency of this device as seen at the computer?

A: The latency of the Magewell USB Capture SDI Plus, One-Channel 2K Capture Device would depend on the resolution and frame rate of the source material. You can find a list of the tested latencies here: https://bhpho.to/4bOIhUc.

Q: 9. Does this device USB 3.0: Compatible with USB 2.0 computers ?

A: no this will NOT work with USB 2.0 computers, USB 2.0 does not have the bandwidth to support the Video signals.

Q: 10. Will this work with the GH5 ii ?

A: Yes, the CAME-TV Protective Cage Plus for GH5 is compatible with the Panasonic GH5 II.

cbz350	08/09/2024
[No SDI input] [This review was collected as part of a promotion.] This is a pretty cool little remote. They make it easy to setup based on the brand of your devices. Be sure to read what functions are supported and which ones aren't to make sure it will work for you. 5

Ashley	29/08/2024
[1 to 2 frames] [This review was collected as part of a promotion.] Getting this remote connected took a little while because you have to do each key individually..but I absolutely love this remote. Unfortunately my dog also loved it and tore it apart :( but I will definitely be getting another 5

Bobby45	28/08/2024
[No SDI input] [This review was collected as part of a promotion.] This is a great remote to control your TV and your streaming devices. Easy to use and only need one remote to control everything. The buttons feel nice and the set up is not very difficult. The remote has backlight which is very helpful. 5

Mars	27/08/2024
[No SDI input] When I decided to wall-mount a 55 inch TV, I wanted as clean an installation as possible: no tethered boxes on a table below. That meant attaching a Fire Stick 4K, a Harmony Hub and an old TiVO Mini to the rear of the TV. The TiVO and Fire Stick were easy, but the Harmony Hub is made to sit on a horizontal surface, period. As I envisioned fabricating something out of metal strapping, I spotted the Mount-IT! MI-355 online. Perfect! And it was. I cross-strapped the Harmony Hub to it using nylon cable ties and secured it to the TV mount, neat and solid. Price is right, too. 5

AudreyMarie	23/08/2024
[1 to 2 frames] [This review was collected as part of a promotion.] The One For All Universal streaming remote is amazing. Very easy to program for all your devices for myself the television, soundboard, Xbox, streaming box and blu-ray. It has quick access buttons to jump straight to your favorite channels. It copies all functions from your previous remotes making life so much easier with just one. Works great and is well made. 5

kristi45	01/08/2024
[1 to 2 frames] [This review was collected as part of a promotion.] This one for all streamer remote is wonderful. It makes it so much easier to have one remote than 2 different ones. It helps my tenants be able to easily figure out how it works and not have to guess and possibly change something to make the tv remotes not work. This was easy to set up. The directions were easy and precise. LOVE IT! 5

Allieyo24	18/07/2024
[No SDI input] [This review was collected as part of a promotion.] This remote came in perfect timing, my son had just lost my remote and I had this one as a backup. This remote has great features, is straight to the point, and sleek looking. The buttons are easy to press and just overall appealing. 5

Timothy	23/06/2024
[4.58 lb] Recently, I was tasked with providing my services as a DJ for my church for a major reception. With that being said I needed space for my laptop (a 13 Apple MacBook Air from 2008 running Debian GNU/Linux and featuring Shaquille O'Neal's face on the wallpaper and icons. Hence, it is known as a Shaqintosh), 2x Stanton SCS.3d touch based controllers & 1x Stanton SCS.3m tourch based mixer. Assembly was easy once I figured out the mechanics of how they wanted the washer assemblies to fit together. (I plan on contacting Pyle Pro to clarify their language as it was somewhat confusing). With that being said, my equipment fit perfectly on these surfaces and allowed me to comfortably play music for hours. I loved these so much I purchased a third for my digital mixer and audio interface! I highly recommend these stands, especially at the rate I was able to get them for (~$39). 5

heather1971	25/05/2024
[1 to 2 frames] [This review was collected as part of a promotion.] I love this remote! It is so easy to use. It connected to my tv very easily and all of the buttons work like they should.. especially when trying to go to netflix and other streaming things. I love it! 5

RobinATX	09/05/2024
[No SDI input] [This review was collected as part of a promotion.] This remote worked fine and as expected -- I was able to turn the TV on, flip channels, manage volume and navigate to my smart apps all from the remote. it's nice to not have to use multiple remotes while watching TV. 5