Featuring built-in electronics which eliminate the need for external power supplies, the PRO 42 from Audio-Technica PRO 42 Miniature Cardioid Microphoneis a miniature condenser boundary microphone operating in a cardioid polar pattern. It's capable of picking up frequencies between 70 Hz and 14 kHz. This frequency range, coupled with the microphone's dynamic range of 134 dB and low-profile design, render the PRO 42 suitable for capturing audio in conference rooms, boardrooms, lecterns, podiums, and other install-sound situations.

Cardioid Polar Pattern    70 Hz to 14 kHz Frequency Range    9 to 52V Phantom Power    Built-In XLR Cable    134 dB SPL    Low Profile Design

• Wide-range condenser element with a relatively low-mass diaphragm

• Uniform polar pattern for a more unidirectional, forward-facing pickup of sound-sources

• Durable casing

• Low-profile design for minimum visibility, maximum camouflage

• Built-In XLR cable

Related Questions and Answers

Q: 1. Does this mic come in a wireless version?

A: This mic is not available in a wireless version.

Q: 2. Do I need a power module or can I just plug this into a mini-XLR to XLR adapter and power it with phantom?

A: This version of it has an unterminated cable. This one (AUAT831B) comes with the power module and then you can take an xlr cable out of the module.

Q: 3. Can you show a picture of the female pin connections and the numbers on them?

A: We do not have a wiring scematic: Terminated for Shure wireless systems using TA4F-type connector. 55 (1.4 m) cable

Q: 4. I'm looking for a microphone to capture dancer audio on a stage (steps, claps, tambourine, etc.). I'm also hoping to pick up the audience applause/cheering with the same microphone. I'm hoping I could tape this down on the edge of the stage to achieve that. Has anyone done this? What were your results? What kind of microphone would work better? Thanks!

A: This mic will work for you but be aware that the sound coming form the front of the mic will be much louder than from behind it since it is a cartioid microphone.

Q: 5. is there a good wind screen for this microphone? It is very sensitive to wind.

A: You can use the Auray Fuzzy Windbuster for Lavalier Microphones - Black (B&H # AUWLW) or Rycote Lavalier Windjammer - Black (B&H # RYWFLB). If you prefer a foam windscreen, the Auray WLF-038-3R Foam Windscreens for 3/8" Diameter Microphones - 3 Pack (B&H # AUWLF0383R) or Audio-Technica AT8116 Mini Lavalier Windscreen (B&H # AUAT8116) are compatible.

Q: 6. Do I need a pre-amp setup to connect the AT Pro35 mic to a laptop? Is it plug and play?

A: Yes, Audio-Technica Pro 35 Cardioid Condenser Instrument Microphone requires a preamp or mixer to provide phantom power for the capsule to work.

Q: 7. I have the pro70 and a XLR3F to 3.5 mm TRS cable but I'm not able to record audio with my iPhone with this setup. What am I missing?

A: Smartphones feature a jack that carries both headphone and mic signal. These are not directly compatible with a standard 3.5mm TRS connector. In order to use the Pro70 with an iPhone, you will need an additional adapter with the cable you already have such as the MyMyk connection cable a href= http://bhpho.to/162F02q. target= _blank http://bhpho.to/162F02q./a There is also a single cable solution from Sescom that will allow an XLR connection directly to the phone. See the following link: a href= http://bhpho.to/1E8vFQB target= _blank http://bhpho.to/1E8vFQB/a This cable also allows you to keep the headphone connection as well.

Q: 8. Would this be compatible with a Panasonic GH4 video camera? Or is there a particular adapter/connector required?

A: It has a full-size XLR connection. What input does your camera need? If you've got pro XLR you're all set. This is a great mic! If you have an 1/8 input, this isn't your microphone. :(

Q: 9. Would this mic be good for musical theater performers?

A: Yes, the Audio-Technica Pro 70 Cardioid Lavalier Microphone can be used for musical theater. The mic is designed for use with vocals or instruments and favors the mid-range frequencies.

Q: 10. is connector swivel ?

A: The connector is a 3 pin XLR and it does not swivel.