Add a 100-minute timer to your broadcast studio with this black LX-362U 100 Minute Up/Down Timer from ESE. The LX-362U is a 100-minute (00:00 to 99:59) timer with an ESE Serial Timer Code output. It features a ruggedized baked powder coat aluminum enclosure, and the timer information is displayed on 0.56" yellow LED displays.

The LX-362U features a 4-digit thumbwheel switch that allows the time to be easily preset onto the display. Five front-mounted push-button switches allow for simple operation of the Up, Down, Stop, Reset (to 00:00), and Preset functions. A rear-mounted BNC connector provides the ESE Timer Code for driving remote slave displays and provides access to all functions. Up to 100 slave displays may be driven using up to 4000' of coaxial or twisted pair cable.

Four Digits, One Hundred Minutes Timer    Up/Down/Stop Count, 0.56" Yellow LED    5-Button & Thumbwheel Preset Control    Compatible with Remote Slaves via BNC    Black Painted "LX" Enclosure

0.56" yellow LED display

100-minute up/down count range (00:00 to 99:59)

Thumbwheel preset controls

Four digits (minutes and seconds)

ESE timer code output via BNC

Remote control input

Easy installation

Related Questions and Answers

Q: 1. Does this work with Blackmagic micro studio 4k?

A: The VariZoom VZ-STEALTH LANC Zoom Controller is not compatible with the Blackmagic Design Micro Studio Camera 4K G1 or G2.

Q: 2. Can this accommodate a 50" TV?

A: The Ergotron LX HD Pivot Wall Mount (Black) BH #ER45269009 shows compatibility: Compatibility: Supported Screen Sizes Up to 42" / 106.7 cm Weight Capacity 50 lb / 22.7 kg Mounting-Hole Pattern 100 x 100 mm 200 x 100 mm 200 x 200 mm 75 x 75 mm

Q: 3. What is the inner printable diameter?

A: Yes. These have a 22cm inner diameter.

Q: 4. Can this timer be used in Europe with a step down transformer (120 V to 230 V)?

A: Yes, a step down transformer can be used with this Beseler Digital Darkroom Timer for use in Europe.

Q: 5. Is this product compatible with the Faze Stream 700 by Eliminator Lighting? Their remote is a tc-4

A: I contacted Eliminator Lighting with your inquiry. They state that they do not believe the Faze Stream 700 would work with the Antari Fog Machine HC-1 Timer Remote for HZ-100 / HZ-350 / HZ-400 Haze Machine. They checked with their warehouse and both the Faze Stream 700 and the replacement remote are discontinued. Due to the low demand they have zero replacement remotes in stock. What I would recommend would be to purchase the remote and try it with your Faze Stream 700. If it does not work, you have 30 days from the original purchase date to return the remote for an exchange or refund. The link to our Return link is listed below. https://bhpho.to/2bxrYlG

Q: 6. Can we control multiple LX-991U displays from our ESE ES-362U master clock using a simple BNC T connector?

A: Yes, the ESE ES-362U master is capable of driving up to 100 slave displays via BNC, including the ESE LX-991U Timecode Remote Display ("LX" Enclosure) through a BNC-T connector or for long runs, using a distribution amplifier such as the ES-243. See the link below: https://bit.ly/3DQQ5GZ

Q: 7. Hi, i would like to know the running time for the tape digibeta BTC-D124L is the same for NTSC and PAL? or PAL goes further/less than 124 minutes?

A: PAL records at 50i, which is 25 frames per second compared to 60i which is 30 frames per second in NTSC. Because of that you will get 148 minutes of recording time with this tape in a PAL system.

Q: 8. Is this new or used?

A: The APC Symmetra LX Battery Module BH #APSYBT5 is new. All the products on our website are new unless stated otherwise.

Q: 9. Will this work with a Canon VIXIA HF S10?Cheers.

A: I am afraid not. The Vixia HF S10 does not have a LANC port to work with this controller.

Q: 10. would this timer work with a besseler 23c III enlarger?

A: The Kaiser Electronic Exposure Timer is compatible with the Beseler 23CIII enlarger.