The CWR Series 12-30SD4 Cabling Wall Mount Rackis a 26" wide cabinet designed for accommodating rack equipment and cable installation. A wide-face rackrail comes standard in the cabinet and is set back 4" from the door, leaving room for cable management. Tapped with mounting holes and electrical knockouts, as well as featuring 4 d-rings, the rail is designed to provide easy and convenient installation of your equipment. The rack door can be installed as either left or right handswinging and can be locked and latched for security. The deep door leaves room for additional front cabling before reaching the rackrail. The swing open center section allows for accessing your equipment from the front or rear, and the back panel has a 12½ x 12½" cut-out for installing an electrical pull-box. A passive thermal management fan kit can be installed if additional heat dissipation is required.

Welded steel construction

Wide-face rackrail on left and right of cabinet

Front rackrail is set 4.0" / 10.2 cm back for accommodating cable managers

Swing open center section for front and rear access to equipment and cabling

Left or right handswing locking and latching door

Rackrail includes tapped 12-24 mounting holes in universal EIA spacing

4 d-rings included for cable management

Back pan features ½", 2", and 3" electrical knockouts, as well as a 12½ x 12½" cut-out for electrical pull-box

Engineered to facilitate passive thermal management

UL Listed, RoHs compliant, GREENGUARD Gold certified, meets CSA standards

Related Questions and Answers

Q: 1. Is the front door on this rack removable? Thanks!

A: Yes, the front door on the On-Stage RKD6000 Wall Mount Knock Down Rack is removable.

Q: 2. Can casters be added to make this rack portable?

A: The Video Mount Products ERWEN-15E 19" Hinged Wall Equipment Rack Enclosure is designed for wall mounting and not intended to be used as a portable rack. If you do need to move it, you would need to use a cart like the Wesco Economy Sr. Folding Handle Handtruck (B&H # WEES4), which supports up to 275 lbs. or a different model, depending on the total weight of the rack when it is loaded with equipment.

Q: 3. Will this mount hold the DS-2CD2347G1?

A: Unfortunately this is not the correct wall mount. To be able to wall mount this you will need this hipc140 and hiwml.

Q: 4. What's the dimensions of the CRS14 if you decide to remove the casters/wheels? I want to fit it under my desk, but I have a limited height to deal with

A: The dimensions provided do not include casters. HxWxD 33 x 21 x 16 (exterior dimensions), bottom depth - 22 . For more detailed information, you may contact a Sales Rep here by phone at 800-606-6969 or email audio@a href= http://bandh.com. target= _blank bandh.com./a Odyssey can be reached at 626-588-2528 for technical questions as well.

Q: 5. What is the best way to ventilate this unit? I've seen the 2U intake/exhaust systems, but that's going to quickly eat up rack space.

A: Aside from using a rack mounted fan the other best way is to leave the sides off, if that is an option.

Q: 6. Can the K&M 24110 Speaker Wall Mounts be used with the Peavey PV 115 Two-Way 15 Passive Speakers? If so, are there any additional adapters or hardware needed?

A: Yes they can. The speakers just slip over the pole on the wall bracket. There will be a corresponding hole in the bottom of the speaker. Each speaker weighs 53 lbs. The stand support rating is 110.2 lbs so you should be fine. If the hole is a bit large for the pole mount. You can buy a rubber sleeve that will make it thicker or just wrap some gaffers tape around the pole till the speaker is a snug fit.

Q: 7. Can you explain double stud install better? Building has metal studs. Is that an issue to consider?Other sug for 86" LG displa

A: The Chief RLF3 Large Fit Fixed Wall Mount for 43 - 86" Displays, BH # CHRLF3, is designed to be mounted to a bare 8" concrete, 8"x8"x16" concrete block; or 2" x 4" wood/metal studs ", 16" or 24") wall covered by drywall with thickness between 1/2" (min) and 5/8" (max). Do not mount to metal studs.

Q: 8. will this work for an Acer Predator x28 monitor?

A: The AVF Group Multi-Position TV Wall Mount (For 12-43" Screens) BH #AVA204MT will accommodate the Acer Predator x28 monitor's 100mm x 100 mm VESA mounting pattern and its 16.30 lbs. weight.

Q: 9. Can I mount an Ergo 45-295-026 on this wall mount?

A: Not at all.

Q: 10. Is there a compatible junction box for this wall mount?

A: No junction box needed since the mount is hollow and has space for the cables inside of it.