The 120V Da-Lite Tensioned Advantage Deluxe Electrol Screen 65" x 104"from Da-Lite Tensioned Advantage Deluxe Electrol Screen 65" x 104"is designed to eliminate the extra step of finishing the screen with trim. The Advantage line of projection screens is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets make it easy to attach the screen housing to the structure above the drop ceiling.

Tensioned screens ensure the smoothest surface possible, and the screen features a closure door that hides the open space and screen in the ceiling, providing a cleaner aesthetic. The screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

123" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Closure Door Hides Open Space    Smooth Roll Technology    Video Projector Interface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Standard Low Voltage Control (LVC) to keep your screen operation flexible
• Smooth Roll Technology to keep your screen perfectly flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen perfectly taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum rated case
• White powder-coated closure doors and case for a clean aesthetic
• Decora-style, three-button wall switch
• Standard black backing retains projected brightness on front projection surfaces
• Seamless screen surface

Related Questions and Answers

Q: 1. What is the span of the feet?

A: the feet are adjustable so it can be 12 to as far as 36 Obviously the wider the span, the sturdier the Tripod is. However I've used it within 1-2' span and its held up just fine

Q: 2. how much space does the stand take up?

A: Around 3' by 3' on the ground and about 30 tall. We have it set between two desks and works fine.

Q: 3. I saw it has a weight limit of 40 pounds. Can the mounting bracket fit a 50" TV?

A: The Gator Frameworks Deluxe Tripod LCD/LED Stand BH #GAGFWAVLCD2 will accomodate televisons and monitors that offer VESA Mount Patterns of 100 x 100mm or 200 x 200mm.

Q: 4. Has anyone tried tripod scrim stand covers to conceal the legs?

A: Tripod scrim covers may work well with the Gator Deluxe Quadpod A/V Stand for Displays up to 65" (Black) BH #GAGFWAVLCD25. We have not physically tried them out for fit with this item.

Q: 5. Can you attach an FSI MM100-LP VESA to C-Stand adapter on this?

A: The FSI Solutions MM100-LP VESA to C-Stand Adapter (Landscape/Portrait Swing) BH #FSMM100LP is designed to connect to a C-stand. Key Features Supports 17 to 32" Monitors up to 40 lb 75 x 75 & 100 x 100mm Mounting Pattern Mounts to 5/8" Male Spigots Landscape-to-Portrait Swinger Built-In Designed for Easy Adjustment Quick Release Removal from Stand

Q: 6. How many lumens is this light?

A: Unfortunately, the manufacturer does not publish a lumens output for this LED panel.

Q: 7. What's the diameter of the len hood?

A: The Nikon HB-104 Lens Hood's diameter is slightly under 6.5”.

Q: 8. How long is this lens hood?

A: The Nikon HB-104 Lens Hood measures 5.5" long.

Q: 9. How wide are the legs when it is setup? I want to make sure the spot I want to put it has enough room.

A: Its a adjustable from 4.75” - 57.8” with a recommended distance of 36".

Q: 10. Is the height range measured to the center of the TV?

A: The adjustable height range between 43" and 72" on the Gator Deluxe Quadpod A/V Stand for Displays up to 65" (Black), B&H # GAGFWAVLCD25, is measured from the center of the mounting plate for the display.