Da-Lite Tensioned Advantage Deluxe 52X92" Motorized Screen

Da-lite Tensioned Advantage Deluxe 52x92" Motorized Screen

Product Code: eq25877
Availability: In Stock

$25,431.00 $36,874.95

Qty

2 reviews Write a review

Description
Reviews (2)

The 220V Da-Lite Tensioned Advantage Deluxe 52x92" Motorized Screenfrom Da-Lite Tensioned Advantage Deluxe 52x92" Motorized Screenis designed to eliminate the extra step of finishing the screen with trim. The Advantage line of projection screens is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets make it easy to attach the screen housing to the structure above the drop ceiling.

Tensioned screens ensure the smoothest surface possible, and the screen features a closure door that hides the open space and screen in the ceiling, providing a cleaner aesthetic. The screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

106" Diagonal / 16:9 Aspect Ratio HD Progressive 1.3 Screen Surface 1.3 Gain / 150° Viewing Angle Closure Door Hides Open Space Smooth Roll Technology

Type
Front/Rear Projection	Front
Aspect Ratio	16:9
Style	Ceiling-recessed
Dimensions
Viewing Area	52 x 92" / 132.1 x 233.7 cm
Diagonal	106" / 269.2 cm
Surface
Gain	1.3
Viewing Angle	150°
Screen Surface	HD Progressive 1.3
Controls
Motor	Standard
Included Controls	None
Casing
Length	115.3" / 292.7 cm
General
Voltage	220 VAC/50 Hz

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

Standard Low Voltage Control (LVC) to keep your screen operation flexible
Smooth Roll Technology to keep your screen perfectly flat
Slim-Tab, a lower profile and stronger tab design to keep your screen perfectly taut
Tensioning Cable System to prevent warping and ensure even lateral tension
UL Plenum rated case
White powder-coated closure doors and case for a clean aesthetic
Decora-style, three-button wall switch
Standard black backing retains projected brightness on front projection surfaces
Seamless screen surface

Related Questions and Answers

Q: 1. Anyone know if you can fit two Sony A1 with 70-200mm 2.8 and 24-70mm 2.8 attached and lens hoods reversed end to end vertically?

A: Yes, you can fit two Sony A1 Mirrorless Cameras, with the Sony FE 70-200mm f/2.8 GM OSS II Lens attached to one and the Sony FE 24-70mm f/2.8 GM Lens attached to the other, in the Think Tank Photo Airport Advantage Roller.

Q: 2. Dear BH Photo Video, I am wondering if a Canon 400mm f2.8 L IS USM lens and a 1D X body would fit in this case. Thanks

A: Yes, the Think Tank Photo Airport Advantage Roller Sized Carry-On (Black) can handle up to a 200-400mm lens with no issues, and it can accommodate a 400mm fixed lens and body combo.

Q: 3. In which country is this case manufactured?

A: As per our records, this roller case is manufactured in Vietnam. Please note that this is subject to change at any time.

Q: 4. Would my JVC GY-HM600 fit inside this bag?

A: This case will be a very tight fit with a camcorder like the GY-HM600, we do not recommend it. Instead I suggest Think Tank's Photo Video Transport 20 Carry-On Case (Gray), B&H # THVT20. This is designed with larger bodies and camcorders in mind. https://bhpho.to/2JKOk3o

Q: 5. Think Tank Photo 730553. Will this bag accommodate Nikon D810 with mounted 300mm F2.8?

A: I use it for exactly the same lens. A canon 1Dx+1.4x or 2x converter+a Canon300 2.8 will occupy one half of the bag. The second half I carry a second body with a canon 100-400. Both with camera mounted on the body.

Q: 6. Will this hold: Canon 5d Markiii, Canon 70-200 f 2.8 V2, Canon 24-70 f2.8 v2, Canon 135 f2.0, Canon 600 ex rt, Canon 430exiii rt (two of these), canon 100mm f2.8 macro?

A: Not sure I would cover your load. I carry my Canon 5d Mark III, Canon 70x200, Canon 24x70 II, Canon 16x35,Canon flash, Lee filters, 15 inch laptop and more. It fits in even smaller planes upper storage. It saves my back in the airports. They have another one a bit larger. Good quality.

Q: 7. Does this bag really fit in overhead storage on small regional jets? In a 4-star review by Gary, this bag is stated as NOT fitting in the overhead storage. From his review: "It was promoted as acceptable for smaller commuter flights but each flight I am required to valet check the bag." I have been using a Lowenpro backpack that fits in overhead storage bins, but my knees cannot handle an addition 30 lbs on my back with flight connections.

A: The Think Tank Airport Advantage is designed by Think Tank to fit most overhead compartments. However, this is subject to individual planes, flights, boarding group allowances, and carriers. Please check with your airline carrier for their final say; unfortunately, we are unable to guarantee anything on behalf of Think Tank or flight carriers.

Q: 8. Wheel diameter?

A: The diameter of the wheels is 3".

Q: 9. Is the Airport Advantage lockable?

A: from looking at the top of the case where the zippers both have holes to put a TSA lock on them

Q: 10. will 2 sony a1 bodies and a 200-600mm lens and 24-105mm and charger and spare batteries fit?

A: Yes, the Think Tank Photo Airport Advantage Roller Sized Carry-On (Black) can fit two Sony a1 Mirrorless Cameras, the Sony FE 200-600mm f/5.6-6.3 G OSS Lens, the Sony FE 24-105mm f/4 G OSS Lens, and chargers and batteries.

Rikilah	14/09/2024
[106" / 269.2 cm] This Screen was easy to install. It took 3 people and 2 ladders to get the job done. The remote is really not needed but i opted to install it as well. The motor runs really smooth. The screen is nice and wide. A really good buy. 5

Gab Laughin	03/06/2024
[106" / 269.2 cm] We installed this in a rehabbed church space that's now a contemporary art gallery flush mounted it to an exposed beam and it looks and works great. That said, it's only been about a week, so maybe I'll report back later if I have any complaints! I was surprised that, for its length, there are only 2 mounting holes on either end, so I fear that it may sag over time. But again, too soon to tell. Where it does mount in those 2 places, it's on a solid plastic end cap/brace, so it seems like it will hold up well. It weighs about 85 pounds, so we had 3 people to install. We had to go about 17 feet up to the beam, we leveled, marked and pre-drilled & drove lag bolts into the beam and then used two extension ladders on either side to climb and carefully slide the projector up on the ladder's rails. Our 3rd person was on a 10ft ladder in the middle and was there as a spotter for extra support. It was then quite easy to hook it on to the lag bolts once we slid it to the top. All in all, it's an easy install, we opened the box and had the job done in less than 4 hours. Just be sure you have the wiring supplies and the proper mounting hardware and you'll have no problem! 5