Ps4 Controller Motor

Product Code: eq25979
Availability: In Stock

$3,630.00 $4,356.00

Qty

15 reviews Write a review

Description
Reviews (15)

The ps4 controller motoris a wireless follow focus controller that easily pairs with a CINEGEARS wireless motor. You can use the controller for focus, zoom, or iris. The controller operates on a frequency of 433 MHz, providing a range of up to 320' line of sight. The wireless controller and optional motor combination provide simple auto lens calibration and manual lens remapping for easy lens changes.

The Express Controller features a removable marking disc, a side mounted index marker, and allows you to program up to four stop / positions. You can adjust the transition speed for programmed presets, and with optional cables connected to your motor, you can control start/ stop for ARRI, RED, Sony, and Canon professional camcorders. LED indicator lights show you the status of the controller.

Suitable for Focus, Zoom, or Iris Easy Motor Pairing 300' Line of Sight Range Auto Lens Calibration Manual Lens Remapping Dry / Wet Erase Marking Disc Up to 4 Programmable Stop Points Remote Recording Trigger Adjustable Transition Speeds for Presets LED Indicator Lights

Parameters
Material of Construction	Aluminum and steel alloy
Construction	CNC machined, black anodized coating
Frequency	433 MHz (RF)
Battery	LiPo
Charging Voltage	Input: 12 to 30 VDC
Operating Temperature	32 to 104°F / 0 to 40°C
Storage Temperature	-4 to 122°F / -20 to 50°C
Dimensions	5.8 x 2.8 x 2.8" / 14.6 x 7.0 x 7.0 cm
Weight	Approximately 1.0 lb / 0.5 kg

The wireless controller features an internal LiPo battery that can run the controller for approximately 20 hours on a single charge. You can operate the controller while simultaneously charging it. Charging is via a mini USB connector, and it supports input voltage range of 12 to 30 VDC.

The controller supports auto-calibration, manual calibration, and lens remapping.

After calibration, the end stops are automatically slightly shortened, preventing you from pinning the lens.

You can program focus pre-sets into the controller and then transition between the focus points at the push of a button with adjustable transition speed.

Manual calibration allows you to set close and far distance stops when using an infinitely rotating lens

Related Questions and Answers

Q: 1. Where is this made?

A: The country of origin for this Thrustmaster T248 RACING WHEEL FOR PS5, PS4, AND PC, would be the country of China

Q: 2. Hi, can we do the lens mapping with the SMC 1 as well as the UMC4 ? Thanks

A: Yes, you can perform lens mapping with the ARRI SMC-1 and UMC-4.

Q: 3. Can this work with CLM-3

A: No, the ACM-1 Active cforce Motor Controller with UBUS interface will only work with ARRI Cforce motors. It does not support ARRI CLM-3 Motors.

Q: 4. Will this work on an Arri Alexa Mini?

A: Yes. Unit features a standard SMA-female input.

Q: 5. Does it work with pc?

A: Yes, the Thrustmaster T248 Racing Wheel and T3PM Pedal Set (PS5 / PS4 / PC) is compatible with PC.

Q: 6. Will this work on an Arri Alexa Mini LF?

A: The ARRI Swivel Antenna for SMC-1/EMC-1/AMC-1/UMC-4 Motor Controller (3.3") (B&H# ARASASEA1) is compatible with all ARRI Alexa studio cameras.

Q: 7. Is there a kit with the larger SMART 1 NM motor but only the thumb controller?

A: The PDMOVIE MOTOR SMART Intelligent Focus Motor, i=comes in kits of 2 and 3 batteries configurations.

Q: 8. Will this Smart Motor connect to the PDL-TC-AFP thumb controller? https://www.bhphotovideo.com/c/product/1524269-REG/pdmovie_pd

A: As stated in the listing name for the PDMOVIE Wireless Thumb Controller for Remote Air and Live Air Motors, it will only work with the Remote Air and Live Air Motors.

Q: 9. How do I power the item and does the cable come with this unit?

A: It is powered by the LBUS. It does not come with the cable.

Q: 10. Does this also work with the crane 2s?

A: No, This motor will only support the Crane 2. The motor that works with the Crane 2s is the following model. Unfortunately discontinued - Zhiyun-Tech TransMount Focus/Zoom Control Motor 2.0 BH #ZHGMBCMF06 https://bhpho.to/3UlHN0m

Dimitrios	27/09/2024
[433 MHz (RF)] I use this to switch focus between two actors and it works great as expected. 5

Roberto	29/08/2024
[LiPo] hace lo que tiene que hacer, suficiente, rápido, efectivo. las tres B para lentes Canon L, Gh5 con peaking hacen buen equipo, perfecto para 1 man crew. 5

Shawn	28/08/2024
[433 MHz (RF)] Haven’t used it a ton yet. But compared it to the Teradek motor, and the Heden MV26 (paired with a It’s definiteky quieter and smaller - and about half the weight of the Teradek, which was already pretty light. I dig the ingenious rod clamp that adapts to either 15 or 19mm internally without the need for an adapter that you could lose. I am using it with my Chrosziel Magnum 200. Has no problem pulling stiffer cinema lenses. The only potential negative is that the cable that runs to the receiver is fixed. So while that reduces weight with the reduced connector, if the cable gets damaged, your motor is out of commission until the motor cable is repaired (taking the whole motor out of use). I intend on having a backup motor. Given that Chrosziels system is compatible with other brands of motors (unlike the Teradek), should be easy to find one to swap in. 5

Clifford	22/08/2024
[LiPo] I priced having this cable costume made to save some money but I couldn’t find a vendor that could do it. But if you have two motors it is worth having to lessen the cables on your camera. 5

Grady	06/08/2024
[433 MHz (RF)] Def worth having this . Highly recommend 5

Marcin Majerski	04/08/2024
[LiPo] Works Perfect! It is my First follow focus and it is very simply to use. Very good service and contact with sellers. Fo every questions i have fast feedback. Magnum its automatic calibrate and fast. He has a several options preset. It is also good work with hard cinema lenses and ring for lens. I recommend this product to professional work. In our TV also use this systems. 5

Geoffrey	19/07/2024
[433 MHz (RF)] for any of my smaller jobs i always throw the nucleus in the kit. its like the acura of WFF systems. cheap, easy to repair if things get broken. doesn't cost an arm and a leg to have with you. 5

Marc	05/07/2024
[LiPo] This is a great tool to use focus on my Zhiyun Crane 2 gimbal. I ordered two more because the original one I've had for years started to struggle to connect with the microUSB port. I could have been more gentle with the microUSB connection and also it got plenty of use! If you do purchase this, I recommend updating the servo follow focus firmware on it, for AB point compatibility, and using the original Zhiyun USB cable when doing that update. (The cable that comes with the Crane 2). For some reason these older Zhiyun products don't like off brand cables. I'm not sure what's different about the Zhiyun cables but they work. 5

Mary	04/07/2024
[433 MHz (RF)] Small and very lightweight. Easy to calibrate, but sometimes have to remove battery to re-calibrate. The thin controller that goes with is brilliant. And on/off switch would help. It’s tricky to figure out to push the battery to the side. 5