The remote control ceiling mount tv bracketmounts on a 15mm support rod and allows you to mount your CINEGEARS lens control motor on your rods and drive your lens's geared focus, zoom, or iris. It features a spring-loaded locking lever that allows you to tighten the bracket on the clamp, while at the same time securing the motor to the clamp.

For CINEGEARS Lens Control Motors    For 15mm Support Rod    Spring-Loaded Locking Lever

Provides height adjustment when used with an optional CINEGEARS Lens Control Motor.

The 15mm clamp is designed to work specifically with 15mm support rods.

The spring-loaded locking levers allow you to tighten or loosen the clamps, even when you do not have room to rotate the lever through 360° of rotation. If the lever becomes blocked, you gently pull up on the lever, rotate it back, and lower the lever to continue tightening or loosening it.

Related Questions and Answers

Q: 1. Will this work with model CV620?

A: Not that we are aware of, this is specifically for the CV610. However the Marshall Electronics CV620 comes with the ceiling bracket included in the box. You do not need to purchase a ceiling mount separately with B&H # MACV620WH2. https://bhpho.to/2wtZMYQ

Q: 2. I paired these speakers with a Pyle amp (Model PTA4) and they sound bad. Is there an amp that will sound good with an AUX input?

A: The JBL Control 26CT - Ceiling Speaker with Transformer (Pair) pairs nicely with the JBL CSA series such as B&H # JBCSA280Z.

Q: 3. what component is needed to mount another monitor back to back?

A: The back-to-back accessory for the Atdec TELEHOOK Drop Length TV Ceiling Mount (White) BH #ATTH3070CTSW has been discontinued and is no longer available for sale.

Q: 4. Is this the right mount for DS-2CD2383GO-I camera?

A: Yes, the ABM will work with the camera that you listed.

Q: 5. Is this mount compatible with the Samsung model # UN55HU6840? Thanks

A: Yes. The TV has a 400 X 400mm VESA mounting pattern and is perfectly compatible.

Q: 6. For the telescoping height range, are 41.7" and 61.4" the only two options, or can be set anywhere in between?

A: The telescoping height adjustable pole on the Mount-It! MI-509L Full Motion Ceiling Mount for 32 to 70" Displays can be set to many different height increments between 41.7" and 61.4".

Q: 7. Which inclined mount can be used with the Ring Floodlight Cam for under eave mounting?

A: RING does not offer this accessory.

Q: 8. I'm looking at using these for a church system. what do you recommend the placement to be between each speaker on a 9'-12' cathedral ceiling? Do you connect to both 2,3 and 1,4 to daisy chain the speakers or just 1,4 for the loop thru to the next speaker? And finally, can you use a standard 1/4 mono plug to speaker wire to connect the speakers?

A: Unfortunately for such a large job, we would not be able to make accurate recommendations or product suggestions off site. We would highly recommend bringing in a project professional who could inspect your location and make the appropriate recommendations per your design criteria. While we cannot make a specific recommendation, one of our manufacturers does offer this type of service. TOA Electronics is a premier manufacturer of audio and security products and does offer onsite design and installation. B&H would be more than happy to bid out the products required for your project.Please contact Johnathan Allen at 845-729-3482 / jonathan_allen@a href= http://toaelectronics.com. target= _blank toaelectronics.com./a He is an install professional that will be able to handle this type of large project for you.

Q: 9. Are the cables visible where the mount meets the ceiling? Do the cables go all the way through the pipe?

A: The cables will not be visible if pased through the ceiling and the ceiling mount component.

Q: 10. How do you mount this? I teach in a classroom that has acoustic ceiling panels.

A: I went up in the attic and mounted it on a 2x4 across the joists. I realize you can't do that. You would probably have to secure it to a concrete slab above the ceiling tiles. Sounds like a job for a handyman.