Take advantage of fast Gigabit Ethernet data speeds with the poe power over ethernet adapterfrom Ubiquiti Networks. This router comes equipped with a total of five Gigabit Ethernet ports: one data/PoE input port, three data ports, and one data/PoE passthrough port. Inside the router you will find a 880 MHz dual-core processor along with 256 MB of DDR3 RAM and 256 MB of NAND code storage.

The advanced hardware found inside this Ubiquiti Networks router allows you to leverage the power of PoE. Eliminate the need for power adapters and power the EdgeRouter X with 24 V passive PoE input. You can also utilize the PoE passthrough feature to power a single airMAX device.

1 x Gigabit Ethernet Data/PoE Input Port    3 x Gigabit Ethernet Data Ports    1 x Gigabit Ethernet Passthrough Port    Dual-Core 880 MHz Processor    256 MB DDR3 System Memory    256 MB NAND Code Storage    Wall-Mount Compatible    ESD/EMP Protection

The EdgeRouter ER-X can be powered by an external power adapter or 24 V passive PoE input. A passive PoE passthrough option is available to support a single airMAX device.

Powered by a proprietary and intuitive graphical interface, EdgeOS, this EdgeRouter X can easily be configured for the routing, security, and management features required to run your network efficiently. For advanced network professionals, an integrated CLI is available for quick and direct access using familiar commands.

The EdgeRouter X provides a graphical user interface designed for convenient setup and control. Accessed via a network port and web browser, the user-friendly interface provides intuitive management with a virtual view of the ports, displaying physical connectivity, speed, and status.

The Dashboard displays detailed statistics: IP information, MTU, transmit and receive speeds, and status for each physical and virtual interface.

EdgeOS is a sophisticated operating system with robust features, including:
• VLAN interfaces for network segmentation
• Static routes and support of routing protocols: OSPF, RIP, and BGP
• Firewall policies and NAT rules
• DHCP services
• Quality of Service (QoS)
• Network administration and monitoring tools
• Administrator and operator accounts
• Comprehensive IPv6 support

The CLI provides quick and flexible configuration by command line and features the following:
• For power users, configuration and monitoring of all advanced features
• Direct access to standard Linux tools and shell commands
• CLI access through the serial console port, SSH, Telnet, and the graphical user interface

• 5 x Gigabit RJ45 ports
• Passive PoE passthrough option
• Power via 24 V passive PoE or power adapter
• Ports configurable for line-rate, Layer-2 switching
• 130 kpps for 64-byte packets
• 1 Gbps for 1518-byte packets

Related Questions and Answers

Q: 1. How many watts of POE power does this support?

A: The Veracity OUTREACH Max G Gigabit Ethernet & PoE Extender (BH # VEVORORMG) supports up to 90W of power onto an Ethernet cable while maintaining backwards compatibility with older IEEE PoE standards.

Q: 2. Will this work with a PTZ camera or an audio controller that uses POE+?

A: The Ubiquiti Networks U-POE-AT PoE+ Adapter is designed to power PoE devices from Ubiquiti specifically. The manufacturer does not advise using this with non-Ubiquiti products, as it may not function correctly.

Q: 3. is the output 48 DC Volts?

A: This model provides active PoE with a 48v DC output that meets the requirements of 802.3at/af.

Q: 4. Is it possible to plug a non-POE unit into this switch without damaging the non-POE device?

A: Yes. It is possible to plug a non-POE unit into the Netgear 8-Port Gigabit Ethernet PoE+ Unmanaged Switch.

Q: 5. What is the DC Power input in the screw terminals?

A: We use our 57V DC power supply, but you do not require power on the camera side of this point to point setup. You can place the 57V DC power supply, VPSU-57V-800, on the base end and POE will be sent over the coax, power the camera side and supply you with up to 25Watts to your end device. If you have any other questions, please feel free to call us at (800) 679-1590 or email into sales@veracityusa.com.

Q: 6. Will this help boost video/audio signal over cat6 as well?

A: The Veracity OUTREACH Max G Gigabit Ethernet & POE Extender is primarily used for extended power and data signals; it would also ensure the signal would offer the highest quality transmission for long cable runs.

Q: 7. Is this switch loud? I'm using in a studio control room.

A: It is very quiet.

Q: 8. Would this device also extend the range of an Router/Access Point?

A: This unit will extend your power over ethernet distance another 100m. This will not give you better WIFI range from your router/access point.

Q: 9. Are all 8 ports POE+? The yellow decal under them has POE on the left and then between 4 and 5 it says POE+ so want t be sure it's all 8 and not just 5, 6, 7, 8.

A: PoE on all 8 ports. Total budget 123w.

Q: 10. To reach a distance of 500 ft (Cat 6 Cable PoE from NVR to Camera), do I need one PoE Extender in the middle only?

A: Yes you can put one of these in the middle of the run, just remember this model is not weather proof.