The 120V projector screen for ceiling(fabric, roller, and motor available separately) from projector screen for ceilingis designed to eliminate the extra step of finishing the screen with trim. The Advantage line of projection screens is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets make it easy to attach the screen housing to the structure above the drop ceiling.

Tensioned screens ensure the smoothest surface possible, and the screen features a closure door that hides the open space and screen in the ceiling, providing a cleaner aesthetic. The screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

projector screen for ceilingThis box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24857FI.

109" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Closure Door Hides Open Space    Smooth Roll Technology    Box Only (No Screen Fabric)    Video Projector Interface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Standard Low Voltage Control (LVC) to keep your screen operation flexible
• Smooth Roll Technology to keep your screen perfectly flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen perfectly taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum rated case
• White powder-coated closure doors and case for a clean aesthetic
• Decora-style, three-button wall switch
• Standard black backing retains projected brightness on front projection surfaces
• Seamless screen surface

Related Questions and Answers

Q: 1. What is the correct part number for the ceiling extension down rod? The one listed in Qs is wrong.

A: 1.5" NPT threaded pipe or equivalent will do: Chief CMS-009012W 9-12" Speed-Connect Adjustable Extension Column (White) BH #CHCMS009012W Chief 5" Designer Ceiling Plate with 1-1/2" NPT Opening (White) B&H # CHCMA101W

Q: 2. What is the overall height to the screen?

A: StacyM means 6' folded - meaning still standing on its legs, just rolled together. But fully collapsed, it is 43" as in specs. (Thus, in can easily fit on a car seat or in trunk - without having to put down the back seat to fit from trunk into car)

Q: 3. Can the white cloth with velcro just be replaced?

A: You may contact the manufacturer regarding replacement parts.

Q: 4. Does the part that attaches the projector allow for tilting, too? I know the part that attaches to the ceiling tilts. My projector screen is close to the floor and I am wondering if I can tilt the projector so that it will project onto a low screen.

A: The Kanto Living P301 Slanted Ceiling Projector Mount (B&H # KAP301) has a 90° pivot point that allows for 20° of tilt once a projector is mounted. The point at which the projector attaches, however, is fixed. To project onto a low screen, you may have to angle this mount slightly downwards, then use your projector's keystone functionality to correct any image distortion.

Q: 5. Can I mount 3/4" plywood against the ceiling drywall, anchored to 2 joists, then mount to the plywood?

A: The Epson CHF4000 Universal Projector Ceiling Mount ,BH # EPPCM5040UB, will mopunt t a robust plywood base, securely mounted to the ceiling.

Q: 6. what is the spread on the spider arms?

A: The SANUS VMPR1b VisionMount Universal Projector Ceiling Mount - Black BH #SAVMPR1B is compatible with thousands of projectors, but the arm measurement is not specified.Sanus claims: " Versatile mount design is compatible with more than 95% of all DLP and LCD projectors on the market."

Q: 7. How much weight will this ceiling mount support?

A: At least 26 lbs.

Q: 8. What screws did you use to install on a drywall?

A: As others have said it comes with everything needed to mount it.

Q: 9. can this be used with rear projection?

A: The Kodak Inflatable Projector Screen (17'), B&H # KO17INFPS, is designed for front-projection use only.

Q: 10. Is the mount white or black?

A: White