The dedicated samsung hood microwave filteris specifically designed for use with Nikon's AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR lens. It is primarily used to prevent unwanted stray light from entering the lens by extending and shading the end of it. A dedicated hood is crafted to perfectly suit the specific focal length of the lens it is designed for. Additionally, this hood features a non-glare matte finish on the interior surface to further prevent or limit lens flare. Also, since the end of the lens is extended, you get the added benefit of some extra protection from accidental impact.

This lens hood features a filter access panel that allows you to easily reach and adjust rotating filters without the need to remove the hood from the lens. The "petal" shape of this lens hood maximizes the amount of hood coverage for the minimum amount of weight and hood area. The bayonet mount is designed to also work in the reversed position, allowing the hood to be placed backwards over the lens for a more compact storage solution.

For Nikon AF-S NIKKOR 28-300mm f/3.5-5.6G ED VR Lens

Designed to accommodate the exact angle of view of the camera's lens

Minimizes flare and ghosting by blocking out stray light

Protects your lens from accidental impact and the elements

Filter access panel can be removed for easy adjustment of rotating filters.

Related Questions and Answers

Q: 1. Will these filters and hood fit the Canon EF 70-300mm f/4-5.6 IS USM Lens?

A: fit fine on mine (model 0345B002 )

Q: 2. Is there any hood with filter access for a Canon EF 70-200mm 2.8 IS ii, Sony 85mm GM 1.4????

A: No, there is no hood designed to work with those lenses that give filter access.

Q: 3. Does this also solve the light leak on the 24-70 and the 70-200?

A: No, the following lens hood is designed for the 14-24mm lens by Nikon. for Nikon 70-200 lens and 24-70 the following lens hoods are needed depending on what version lens being used. Such as the following lens hoods Nikon HB-78 Bayonet Lens Hood BH #NIHB78 • MFR #4168 https://www.bhphotovideo.com/c/product/1292839-REG/nikon_4168_hb_78_lens_hood.html Nikon HB-74 Bayonet Lens Hood BH #NIHB74 • MFR #4131 https://www.bhphotovideo.com/c/product/1175263-REG/nikon_4131_hb_74_bayonet_lens_hood.html

Q: 4. Does this make any difference when I want to use only 112mm Circular Polarizer without any ND filter ?

A: You can use a circular polarizing filter alone with this lens hood, without any ND filter--there will be no issue doing this.

Q: 5. How does this motion detector connect to a security system?

A: The sensor will connect to an NVR or DVR's alarm input and can trigger motion detection then someone walks in between two units and breaks the beam.

Q: 6. Is there any vignetting at the wide angle side using this hood? Thanks!

A: The Vello HB-50F Lens Hood is specifically designed for the Nikon's AF-S NIKKOR 28300mm f/3.55.6G ED VR lens. When used with this lens there is no vignetting even at 28mm.

Q: 7. Does this hood also work with Nikkor 24-70 2.8 S lens?

A: Unfortunately it does not.

Q: 8. Will the hood and filters fit on an Olympus OM-D E-M5 Mk II with a Zuiko 14-150mm F 4.0-5.6 II lens? Specifically, will the filters clear the convex curve of the lens?

A: Yes, the lens hood and 58mm filters in this kit will work on the M.Zuiko 14-150mm F 4.0-5.6 II lens while mounted on the Olympus OM-D E-M5 Mark II.

Q: 9. Will this fit the RF 24-105 lens?

A: No but the EW-73D would be the correct hood for the Canon RF 24-105mm f/4-7.1 IS STM Lens. Please take a look at the following link: https://bhpho.to/35kao1a

Q: 10. What is the voltage range is for Hw-S60D/Za?

A: The Samsung Hw-S60D/Za Soundbar (B&H # SAHWS60D) will accept 120V 60 Hz AC input power.