The 120V ceiling track fabric projector screen(fabric, roller, and motor available separately) from ceiling track fabric projector screenis designed to eliminate the extra step of finishing the screen with trim. The Advantage line of projection screens is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets make it easy to attach the screen housing to the structure above the drop ceiling.

Tensioned screens ensure the smoothest surface possible, and the screen features a closure door that hides the open space and screen in the ceiling, providing a cleaner aesthetic. The screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

ceiling track fabric projector screenThis box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24862FI.

164" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Closure Door Hides Open Space    Smooth Roll Technology    Box Only (No Screen Fabric)    Video Projector Interface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Standard Low Voltage Control (LVC) to keep your screen operation flexible
• Smooth Roll Technology to keep your screen perfectly flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen perfectly taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum rated case
• White powder-coated closure doors and case for a clean aesthetic
• Decora-style, three-button wall switch
• Standard black backing retains projected brightness on front projection surfaces
• Seamless screen surface

Related Questions and Answers

Q: 1. Is the duet waterproof?

A: No, the Epson Duet Ultra Portable Tripod Projector Screen BH #EPELPSC80 is not weatherized or waterproof.

Q: 2. How much weight will this ceiling mount support?

A: At least 26 lbs.

Q: 3. How high does the stand put the screen? From the floor / base also width to include the frame to top of screen & side to side what are those dimensions?

A: The KHOMO GEAR Portable Projector Screen (51 x 92") BH #KHGER1153 when fully built is approximately 92" wide x 84" high

Q: 4. Does the part that attaches the projector allow for tilting, too? I know the part that attaches to the ceiling tilts. My projector screen is close to the floor and I am wondering if I can tilt the projector so that it will project onto a low screen.

A: The Kanto Living P301 Slanted Ceiling Projector Mount (B&H # KAP301) has a 90° pivot point that allows for 20° of tilt once a projector is mounted. The point at which the projector attaches, however, is fixed. To project onto a low screen, you may have to angle this mount slightly downwards, then use your projector's keystone functionality to correct any image distortion.

Q: 5. What screws did you use to install on a drywall?

A: As others have said it comes with everything needed to mount it.

Q: 6. Will this screen work with an ultra short throw projector?

A: The KHOMO GEAR Portable Projector Screen (51 x 92")BH #KHGER1153 is not designed for use with UST projectors.

Q: 7. How far from the ceiling will this mount place the projector? Is there any ability to adjust the distance from the ceiling or is it a fixed height?

A: This drops the projector 6 inches from the ceiling. Its is fixed column.

Q: 8. Will this work on a projector with 4 screw holes 12" apart from each other?

A: Claudio, The P101 will work with any projector that has 4 screw holes. The extension arms are long enough to accommodate your projector. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.

Q: 9. can this be used with rear projection?

A: The Kodak Inflatable Projector Screen (17'), B&H # KO17INFPS, is designed for front-projection use only.

Q: 10. Is the mount white or black?

A: White