Recessed Ceiling Projector Screen Wall Bracket

Product Code: eq26502
Availability: In Stock

$23,169.00 $34,290.12

Qty

17 reviews Write a review

Description
Reviews (17)

The 220V recessed ceiling projector screen wall bracket(box available separately) from recessed ceiling projector screen wall bracketis designed to eliminate the extra step of finishing the screen with trim. The Advantage line of projection screens is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets make it easy to attach the screen housing to the structure above the drop ceiling.

Tensioned screens ensure the smoothest surface possible, and the screen features a closure door that hides the open space and screen in the ceiling, providing a cleaner aesthetic. The screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

recessed ceiling projector screen wall bracketThis screen does not include a box, and is designed for installations where a box has previously been selected. Please ensure the box you are using is compatible - i.e., is of the same size and has the same option - as with this fabric, roller, and motor assembly. The box that goes with this model number is: 24851EB.

110" Diagonal / 16:9 Aspect Ratio HD Progressive 1.3 Screen Surface 1.3 Gain / 150° Viewing Angle Closure Door Hides Open Space Smooth Roll Technology Fabric, Roller, Motor Only

Type
Front/Rear Projection	Front
Aspect Ratio	16:9
Style	Ceiling-recessed
Dimensions
Viewing Area	54 x 96" / 137.2 x 243.8 cm
Diagonal	110" / 279.4 cm
Surface
Gain	1.3
Viewing Angle	150°
Screen Surface	HD Progressive 1.3
Controls
Motor	Standard
Included Controls	None
Casing
Length	119.8" / 304.2 cm
General
Voltage	220 VAC/50 Hz

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

Standard Low Voltage Control (LVC) to keep your screen operation flexible
Smooth Roll Technology to keep your screen perfectly flat
Slim-Tab, a lower profile and stronger tab design to keep your screen perfectly taut
Tensioning Cable System to prevent warping and ensure even lateral tension
UL Plenum rated case
White powder-coated closure doors and case for a clean aesthetic
Decora-style, three-button wall switch
Standard black backing retains projected brightness on front projection surfaces
Seamless screen surface

Related Questions and Answers

Q: 1. can this be used with rear projection?

A: The Kodak Inflatable Projector Screen (17'), B&H # KO17INFPS, is designed for front-projection use only.

Q: 2. Will this work for a yamaha HS7?

A: Yes it will. The Yamaha HS7 is 18.1 Lbs and the K&M 24195 weight capacity is 31.6 Lbs. Keep in mind this is a wall or ceiling bracket and will require you to drill some holes in the cabinet.

Q: 3. What screws did you use to install on a drywall?

A: As others have said it comes with everything needed to mount it.

Q: 4. What is the weight capacity of this mount?

A: The load capacity of the Kanto Living P101 Ceiling Projector Mount (Black) BH #KAP101 is 22 lbs.

Q: 5. does this fit an epson vs240?

A: The P301 will fit any projector that uses bolts for mounting. We provide arms in several different lengths to ensure it's compatible with nearly every projector on the market. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.

Q: 6. What is the correct part number for the ceiling extension down rod? The one listed in Qs is wrong.

A: 1.5" NPT threaded pipe or equivalent will do: Chief CMS-009012W 9-12" Speed-Connect Adjustable Extension Column (White) BH #CHCMS009012W Chief 5" Designer Ceiling Plate with 1-1/2" NPT Opening (White) B&H # CHCMA101W

Q: 7. Its just one or a pair?

A: This package offers just one mount.

Q: 8. What size drill bit

A: Four 1-1/2 self-tapping screws.

Q: 9. How much weight will this ceiling mount support?

A: At least 26 lbs.

Q: 10. Does the part that attaches the projector allow for tilting, too? I know the part that attaches to the ceiling tilts. My projector screen is close to the floor and I am wondering if I can tilt the projector so that it will project onto a low screen.

A: The Kanto Living P301 Slanted Ceiling Projector Mount (B&H # KAP301) has a 90° pivot point that allows for 20° of tilt once a projector is mounted. The point at which the projector attaches, however, is fixed. To project onto a low screen, you may have to angle this mount slightly downwards, then use your projector's keystone functionality to correct any image distortion.

AJ Benson	23/08/2024
[1.3] These are my go-to mount for most of the Bose speaker systems!! Love them because they are not a cheap plastic. Have not had one problem yet! 5

anyonymous	12/08/2024
[16:9] Adjustable and sturdy, it works like it is supposed to. No surprises with this mount. 5

Teresa	29/07/2024
[None] Used these multi-purpose brackets to mount my Bose Surround Speakers (note, since they are multipurpose, you will not use all the supplied parts). My speakers were a new style speaker so they are not listed on Bose's list of supported speakers. As promised by B&H they worked just fine. The only hitch lies in the supplied #M8 -.80x30mm screws are too long. I went to Lowes and purchased a small pack of M5-.80 x 25mm screws for $2 and they worked just fine. 5

anyonymous	29/07/2024
[220 VAC/50 Hz] Perfect and solid for our new projector. 5

Mididude	07/07/2024
[1.3] Easy to use. have the option to hang from ceiling or wall looks great 5

LowOverhead	05/07/2024
[Front] One of these brackets was purchased to mount a center speakers above a TV. Bose included all the hardware to mount this easily adjustable bracket including plastic anchors for masonry walls, screws for wood stud mounting and "butterfly" toggle mounting on gypsum (drywall) walls when hitting the stud isn't possible. A small metal, rectangular backing plate with four mounting holes is provided to mount the small, but heavy speakers. The bracket, like Bose speakers, is high quality and includes a couple of adapter pieces to accommodate vertical or horizontal speakers. There is also provided an adapter piece that snaps onto the back of the speaker. This pieces allows you to fully mount the metal plate and set the vertical and horizontal angle of the bracket without you needing to support the weight of the speaker while tightening the single adjustment screw. Before mounting the speaker, a small decorative piece covers the backing plate. There is even thought given to routing the speaker wire through the bracket and into the speaker with small notches and a hole through which you use the Bose style speaker-wire termination plug. Picture instructions are provided for the numerous styles of vertical and horizontal Bose center, front and surround speakers speakers. Of note, the butterfly toggles provided require 1/2" holes. I would guess most home owners/DIY folks have 3/8" cordless or corded drills. This makes it necessary to carefully enlarge the holes in the gypsum just the tiniest bit to insert the toggles. However the screws provided with the toggle are long enough to adjust for 1/2" or 5/8" thick gypsum and perhaps even thicker plaster installations. Keep in mind this bracket is intended for use with Bose speakers and cannot, or at least not easily, be used with non Bose speakers. When complete, the speaker mount is professional looking, matching Bose speakers. 5

Edward	19/06/2024
[150°] If you have Bose Speakers (I have the Bose Acoustimass 10 Series V ones) these are a must have. They are a perfect fit. Very easy to install and super sturdy. Don't mess around with "Universal Stands".� If you have high quality speakers, get the high quality stands to match! If you can't afford these brackets, then you shouldn't be buying high end speakers. Match the quality of speaker with the quality of bracket. 5