The 220V ceiling mount brackets for projector screen(fabric, roller, and motor available separately) from ceiling mount brackets for projector screenis designed to eliminate the extra step of finishing the screen with trim. The Advantage line of projection screens is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets make it easy to attach the screen housing to the structure above the drop ceiling.

Tensioned screens ensure the smoothest surface possible, and the screen features a closure door that hides the open space and screen in the ceiling, providing a cleaner aesthetic. The screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

ceiling mount brackets for projector screenThis box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24857EFI.

109" Diagonal / 16:10 Aspect Ratio    HD Progressive 1.3 Screen Surface    1.3 Gain / 150° Viewing Angle    Closure Door Hides Open Space    Smooth Roll Technology    Box Only (No Screen Fabric)    Video Projector Interface

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction, and allows for more flexibility with ambient light conditions. This surface works for video as well as charts and graphs in a corporate setting. Cone 150° Gain: 1.3

• Standard Low Voltage Control (LVC) to keep your screen operation flexible
• Smooth Roll Technology to keep your screen perfectly flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen perfectly taut
• Tensioning Cable System to prevent warping and ensure even lateral tension
• UL Plenum rated case
• White powder-coated closure doors and case for a clean aesthetic
• Decora-style, three-button wall switch
• Standard black backing retains projected brightness on front projection surfaces
• Seamless screen surface

Related Questions and Answers

Q: 1. what is the spread on the spider arms?

A: The SANUS VMPR1b VisionMount Universal Projector Ceiling Mount - Black BH #SAVMPR1B is compatible with thousands of projectors, but the arm measurement is not specified.Sanus claims: " Versatile mount design is compatible with more than 95% of all DLP and LCD projectors on the market."

Q: 2. How far from the ceiling will this mount place the projector? Is there any ability to adjust the distance from the ceiling or is it a fixed height?

A: This drops the projector 6 inches from the ceiling. Its is fixed column.

Q: 3. What is the weight capacity of this mount?

A: The load capacity of the Kanto Living P101 Ceiling Projector Mount (Black) BH #KAP101 is 22 lbs.

Q: 4. How much weight will this ceiling mount support?

A: At least 26 lbs.

Q: 5. Does the part that attaches the projector allow for tilting, too? I know the part that attaches to the ceiling tilts. My projector screen is close to the floor and I am wondering if I can tilt the projector so that it will project onto a low screen.

A: The Kanto Living P301 Slanted Ceiling Projector Mount (B&H # KAP301) has a 90° pivot point that allows for 20° of tilt once a projector is mounted. The point at which the projector attaches, however, is fixed. To project onto a low screen, you may have to angle this mount slightly downwards, then use your projector's keystone functionality to correct any image distortion.

Q: 6. What would be required to get a XLR audio output from this system? I currently have a qu32 with 18 + desk mics going into it. Is it feasable to get rid of the desktop gooseneck mics and use this system for audio input to the mixing board?

A: The Sennheiser TeamConnect SL Ceiling 2 Microphone Array with Extension Brackets BH #SEUSTCC2KTK will connect directly to external microphones. Please see the manual below for connection options and installation guidance: https://www.bhphotovideo.com/lit_files/762696.pdf

Q: 7. does this fit an epson vs240?

A: The P301 will fit any projector that uses bolts for mounting. We provide arms in several different lengths to ensure it's compatible with nearly every projector on the market. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.

Q: 8. Will this work on a projector with 4 screw holes 12" apart from each other?

A: Claudio, The P101 will work with any projector that has 4 screw holes. The extension arms are long enough to accommodate your projector. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.

Q: 9. Do you have to install extra wood behind the drywall/ceiling due to the x-brace being much smaller than the span of two joists?

A: Yes. it is recommended that a cross piece is added, to be attached to each joists and 3/4" plywood be used as well as "blocking" to be used to attach the ceiling mount securely.

Q: 10. Is the mount white or black?

A: White