Vga To Bluetooth Transmitter

Product Code: eq26635
Availability: In Stock

$558.18 $775.87

Qty

7 reviews Write a review

Description
Reviews (7)

The vga to bluetooth transmitterfrom vga to bluetooth transmittertransmits DVI/VGA, KVM, and IR signals up to 500' via LAN. It is designed for use with the KLX-RX500 Receiver. You can set up your own extension cabling or utilize the pre-existing LAN infrastructure you have access to.

The KLX-TX500 Transmitter compresses data to utilize Cat5e/6 cables, but you will see no degradation of signal when using one Gigabit Internet connections and up. When utilizing pre-existing LAN connections, implementing a one Gigabit switch allows for full resolution extension. If you use smaller bandwidth, you will experience compressed signals, if you choose to forgo the additional switch.

With no software or driver required, you can easily extend DVI/VGA, KVM, and IR signals. The KLX-TX500 Transmitter supports USB emulation and Full HD 1080p video at 60 Hz, and can be controlled with an IR remote control (not included). The transmitter is a compact unit that is suitable for use in pre-configured work environments.

Video
Format	DVI-D
Resolutions	HDTV: 480p, 720p, 1080i, 1080p / 60 Hz / 48-bit TV: 480i
Input Connectors	1 x DVI-I 2 x USB type A female 1 x USB type B
Input Cable Length	Up to 40' (12.2 m)
Audio
Format	Stereo
Input Interface	1 x 3.5 mm phone jack female
IR Interface
Signal Type	38 kHz
System
Interface	RJ45
Cable Requirements	CAT5/5e/6
Maximum Length	500' (152.4 m)
Other
Power	External 100 to 240 VAC / 5 VDC, 2 A @ 10 W
Approvals	UL, CE, ROHS compliant
Operating Temperature	32 to 131°F (0 to 55°C)
Storage Temperature	-4 to 185°F (-20 to 85°C)
Humidity	Up to 80%
Dimensions	7.0 x 1.4 x 3.3" (17.8 x 3.6 x 8.4 cm)
Weight	0.6 lb (0.3 kg)
Packaging Info
Box Dimensions (LxWxH)	10 x 8 x 6"

Transmits KVM signals up to 500' feet via LAN (CAT5e/6 cables)

Chainable for thousands of feet of extension

Supports DVI and VGA monitors

Supports full USB emulation

Audio input and output

Dual control operation with both local and remote use of KVM

Supports high resolution Full HD 1080p up to 1920 x 1080 resolution at 60 Hz

Can be controlled with an IR remote control (not included)

Plug-and-play ready

No software or driver required

Related Questions and Answers

Q: 1. Does the Aluratek ABT01F Bluetooth transmitter paired with Bluetooth headphones add a noticeable audio delay when used with a TV?

A: Discernible but still usable. Not critical.

Q: 2. I bought this to use with my headphones to watch my non Bluetooth television. Was working great and then just stopped. trying to resend, but it won't turn red despite it being unplugged for many days. HELP?

A: Try resetting the ABC01F, then make sure you are in TX mode and not RX mode. Contact support@aluratek.com for further assistance.

Q: 3. Are those ethernet ports to transmit out?

A: Yes. This send out the signal over Cat5,Cat6 or Cat7 cables.

Q: 4. What is the range of the bluetooth? Thank you!

A: Bluetooth range typically maxes out at around 30 feet.

Q: 5. How many sets of bluetooth headphones can this connect to simultaneously?

A: only one! (BUT THE IDEM IS JUNK, ONLY LASTED 3 MONTHS) the battery swelled up.

Q: 6. Does it transmit to Bluetooth speakers? I am looking for connectivity to speakers, not headphones. Thanks.

A: Yes you can transmit audio from the Sennheiser BT T100 to bluetooth speakers.

Q: 7. I used the ABT01F a couple of times with my iPhone 6 S and never could pair it again with my iPhone; whats the problem?

A: Remove the device from the phone's bluetooth list. Then try to pair it up again.

Q: 8. Can this pair with the Aluratek iStream receiver? (B&H # ALAIS01F MFR # AIS01F)

A: Yes the Aluratek ALAIS01F & ALABT01F are compatible with each other.

Q: 9. Does this accept and send mic audio from the headphone to the wired device?

A: The Sennheiser BT T100 Bluetooth Audio Transmitter is not compatible with mic signals. It is only compatible line signal from devices like TVs, computers, or any other audio device that outputs audio via 3.5mm or optical audio cables.

Q: 10. 1- does this take / transmit stereo or mono signal? 2 - Is the input mic, line or something in between level?

A: The Sennheiser BT T100 transmits stereo via bluetooth. The 3.5mm input on the Sennheiser BT T100 Transmitter is consumer line level.

evc2	14/09/2024
[CAT5/5e/6] Since i am using it i am enjoying my movies and tv shows without any complain 5

John	14/08/2024
[500' (152.4 m)] Wanted something to transmit SiriusXM radio to my Bluetooth speaker. Easy setup. Connects with no problem. Seems to have good range, even from a separate room. Recommended. Thanks. 5

Alfredo	12/08/2024
[0.6 lb (0.3 kg)] Very easy to integrate into my stereo/home theater system, and could not be simpler to use with my bluetooth headphones. 5

Daniel	27/06/2024
[DVI-D] This device allows me to move around without being tethered to my mixer by a headset cable. Now I can audition my projects and go get coffee at the same time. Connections were easy to make. Paired easily with my Bose AE2 Soundlink headset. I noticed a few milliseconds of latency when studio monitors were up. Not a problem for me, especially when simply listening via the headset. Range is good. The BT 100 is upstairs in my studio. No dropouts when downstairs in the kitchen. A side benefit is I can now privately listen to internet music and not bother my wife who prefers different genres. Included instructions are brief. Download the manual available here at B&H. 5

Michael	16/06/2024
[500' (152.4 m)] Effortless set up. More expensive than some of the competition but I trust the Sennheiser name. So far it works like a charm 5

Eugene	14/04/2024
[Up to 80%] Love the Hi Fi quality transmitting. The absolute best blue tooth transmitter I've ever owned. 5

Steve	09/04/2024
[RJ45] I need a Bluetooth transmitter so I can watch my shows at night without disturbing anyone. This device bears the Sennheiser label and while likely not actually manufactured by the famous German pro-audio company, it is still a reassuring logo, and so far it is living up to it. It will accept either digital input (via standard Toslink - cable included) or analog (via stereo 3.5 mm mini plug (also included). Also included is a USB power cable, but not the wall wart power supply (you've got plenty of them around by now.) Installation is easy, once you determine which audio output from your source is appropriate. This might be easier if you use the analog option, which might require a 1/4 to mini adapter to use the headphone output on many home systems. Bluetooth synced up to my headphones seamlessly and all is well. My own installation was a bit more complicated because I'm using an HDMI Audio Extractor box for the source. (Not made by Sennheiser.) Sound quality seems quite good through my Bose Bluetooth headphones; there is plenty of level available. When using a device like this there will always be latency as the sound is converted to Bluetooth. It is perceivable but if you can deal with lip sync that is a little rubbery it is acceptable - and unavoidable. Just be sure the loudspeakers are off. So far, with only about an hour of use, this is a product I would recommend. 5