The dual desk mount monitor armwill allow you to affix your monitors to your 0.2 to 2.2" thick desktop or countertop by a clamp-on mount with a number of adjustment options. It provides 22" of extension from the mount, plus 12.6" of height, -90 to 45° of tilt, 180° swivel, and 360° roll adjustments. The mount will support displays up to 29" and 17.8 lb per arm.

Supports Displays up to 29"    Supports Displays up to 17.8 lb per Arm    For Desk or Counter Tops 0.2 to 2.2"    Clamp-on Mounting Base    Provides 12.6" of Height Adjustment    Provides 22" Extension    Provides -90 to 45° Tilt Adjustment    Provides 180° Swivel Adjustment    Provides 360° Roll Adjustment    TAA Compliant

Articulating arms allow monitors to be adjusted to your preferred position to help reduce eye, back, and neck strain.

Ease of motion provided by bushings at all pivot points.

Compatible with VESA 75 x 75 and 100 x 100mm

Monitors can be positioned anywhere from 2.0 to 20.5" above the desktop surface measured at the center of the adapter.

Integrated cable management will help keep cables looking neat.

Related Questions and Answers

Q: 1. Are the screws for securing monitor to arms included?

A: Yes - everything is included

Q: 2. How much clearance is necessary for the bottom screw mounts that hold the monitor to your 'desk?' I am currently using a 6ft folding table and have 1.5 over-hang. Thanks.

A: I'm not sure what you're asking, a picture might help. I have about 9 between botthom of my screws & top of desk

Q: 3. What is the maximum size of the clamp?

A: You have the option to use the clamp or grommet connection to connect it to your desk (0.4 to 3.54 in thickness).

Q: 4. What is the length/height from the table to the middle of the VESA mount? Is that what the "max arm extension length" covers in the specs?

A: Please contact the manufacturer directly for this unpublished specification: Mount-It!: Tel: (855) 925-5668

Q: 5. Will this hold my 32 inch curve monitor?

A: MI-2762 is compatible with 75mm x 75mm and 100mm x 100mm VESA patterns and can hold up to 17.6 lbs per monitor arm

Q: 6. Can this be mounted by screwing it into the desktop? (Actually, it is a kitchen countertop with a back lip - so I cannot use a clamp.) Thank you!

A: It can not be screwed in. It is a table top clamp.

Q: 7. I have a 27 , 19.4lbs. monitor attach to this stand. No matter how much I tighten the retaining bolt, the monitor always sags downwards. How can I keep my monitor held upright with this system? Thanks.

A: I have the same exact issue with my 24 inch monitor that is attached to the right side. Left side is perfect but ride side sags down ever so slightly. I have accepted it as is. Very weird.

Q: 8. Can it be configured to have only one arm attached to the base?

A: Mount-It! Dual-Monitor Desk Mount for Displays up to 32" (Black) BH #MOMI1772B • MFR #MI-1772B is designed for both arms to be connected and operational.

Q: 9. Can you adjust 2 monitors in a stacked method (top and bottom)?

A: Depending on the size of the monitors you might be able to. There are mounts specifically made for this style mounting.

Q: 10. Is this item compatible with an Apple Studio Display?

A: The Ergotron LX Desk Mount Monitor Arm (White) (100mm x 100mm - 200mm x 200mm) BH #ER45490216 will work with the Apple Studio display with VESA adapter ; Apple 27" Studio Display (Standard Glass, VESA Mount Adapter 100mm x 100mm) BH #APMMYQ3LLA • MFR #MMYQ3LL/A