With the handheld camera stabilizer rigyou can control focus on your lens without taking your hand off your rig. This kit consists of the Basestation, a Digital Torque Motor, and a Fingerwheel controller. All required connection and power cables are included, so you're ready to go right out of the box. When fully assembled, this kit provides immediate focus control without weighing down your handheld rig. The system can also be used in situations where direct contact with the lens is not possible, like when the camera is mounted on a motorized gimbal stabilizer.

The Basestation is the center of the microRemote system. It coordinates the Fingerwheel and calibrates the motors to the lenses. Power is also distributed through the Basestation. The Digital Torque Motor can drive photo or cinema lenses, while its small size keep it unobtrusive, and its light weight won't unbalance your rig. The motor will attach to 15mm rods and can be adjusted to fit the diameter of your lens. The included fingerwheel is designed to be mounted on a separately available microHandGrip and will be ideally positioned for index finger operation.

Wired Focus Control    Works on Stabilizers and Handheld Rigs    Basestation, Fingerwheel, and Motor Kit    Motor Fits on 15mm Rod    Fingerwheel Fits on microHandGrip    Includes All Necessary Cables

Works with virtually all cameras and lenses

Precision-movement fingerwheel

Can be alternately used to control zoom or iris (or multiple units can be combined to simultaneously control more than one lens setting)

Automatic lens calibration (with manual calibration option)

Powerful Redrock Torque motor works with cinema and still lenses

All-digital system

Related Questions and Answers

Q: 1. can you deliver this item in the philippines ?

A: This product can be shipped to the Philippines. Please add it to our on-line cart to calculate shipping charges and details.

Q: 2. My Lumix FZ80 is about 21.5oz. One reviewer said his 25oz camera did not weigh enough to balance properly, and claimed you needed a heavier camera for it to work. I need to know if that's true? or if the issue has been addressed and corrected.

A: You do not need a heavier camera to have the YELANGU Handheld DSLR Camera Stabilizer functioning. However, if you plan on manipulating the roll axis, you could add counterweights to completely balance the top and bottom of the stabilizer. Otherwise, a bottom-heavy stabilizer will not be a significant issue.

Q: 3. would a Pansonic AG-CX350 balance well on this unit? The weight is 4.19lbs, I assume the heavier the better it handles on stabilization?

A: This has a 6.6 pound load capacity, so it is possible. However we would tend to recommend something like the B&H # FLCMRK for a camcorder the size of the CX350. You will have better results with this we feel. https://bhpho.to/3m6Vw9a

Q: 4. Will this work with either of my Panasonic Lumix FZ1000 or FZ2500?

A: Yes it should. This stabilizer supports cameras that weigh up to 6.6 pounds. It should work well with those Panasonic cameras.

Q: 5. Will it work with Panasonic G6 and 14-42 kit lens? Is my camera too light for this steadicam?

A: This should work with the Panasonic G7 using a 14-42mm lens, B&H # PADMCG7KB. It has removable counter weights on the bottom, you can have less weights on the gimbal to balance a lighter set up.

Q: 6. You guys buy used equipment

A: We do have a department that purchases used equipment. Please visit the following web link to find out more. https://bhpho.to/2TiNEFY

Q: 7. Can I use with the Blackmagic Cinema Camera 2.5k (BMCC) and the Sigma 18-35mm?

A: The weight of the camera and the lens is 5.08 lbs / 2.3 kg. The YELANGU Handheld DSLR Camera Stabilizer (Blue) weight capacity is 6.6 lbs / 2.99 kg. You should be good. However, we would suggest you will get better performance with a heavier duty stabilizer such as this Glidecam XR-PRO Handheld Camera Stabilizer B&H # GLXRPRO with a weight capacity of 10 lbs / 4.5 kg.

Q: 8. Can I use this with my Canon Powershot SX720?

A: Yes you can. This stabilizer supports cameras up to 6.6 pounds.

Q: 9. can i use with my Panasonic Lumix gh4?

A: Yes, this is designed to work with DSLR and Mirrorless style cameras. It has a load capacity up to 6.6 pounds. It should work well with the GH4.

Q: 10. Can I use this with Sony a6000?

A: You can use this with the Sony a6000, but you will not be able to use the weights that come with the S60T. Instead, purchase some washers at a hardware store in a variety of thicknesses and use those as weights. That is what I did in order to use my Nikon D3300.