The gopro lithium ion battery bacpacis a lightweight and simple solution for mounting your GoPro HERO3, HERO3+, or HERO4 camera without the restrictions associated with a full enclosure. A quick release latch makes it easy to install and remove your camera from the frame, and an integrated two-prong mounting interface allows it to be mounted on most accessories designed for the GoPro. With the camera installed in the frame, you still have access to all camera buttons as well as the HDMI or USB ports for live video output, battery charging, or connecting an external microphone for improved audio recording.

In addition to button and port access, the open-air design helps keep your GoPro cool during extended periods of use and allows for unimpeded audio capture with the camera's built-in microphones. Further benefiting audio capture, a thin windscreen covers the microphone opening. The open design also lets you attach an optional LCD Touch BacPac or Battery BacPac, with a swing-out bracket provided to help ensure the accessory stays attached during your shots.

Low-Profile, Lightweight Mount    Quick Release Latch    Open-Air Design    Keeps Ports Accessible    Enables Unimpeded Audio Capture    Compatible with BacPacs    Fits HERO3, HERO3+, and HERO4 Cameras

• Fits around your GoPro HERO4, HERO3+, or HERO3 like a bumper case, securely holding the camera's edges using internal rubber grips
• Quick release latch for fast install and removal of your camera
• Integrated two-prong mount for use with GoPro accessories
• Enables access to the camera's microSD, HDMI, and USB ports for live video output, connecting an external microphone, charging, and offloading
• Unimpeded audio capture with the camera's built-in microphone
• Windscreen covers microphone opening
• Open-air design helps keep your GoPro cool during long periods of use
• Swing-out accessory bracket securely holes an LCD Touch BacPac or Battery BacPac in place while shooting

Related Questions and Answers

Q: 1. Can two of these 310s be used to run battery power to the Titan X1 on a v-mount adapter?

A: Yes you would need the Rotolight 2-Way V-Lock 24V Battery Adapter, BH # ROVL224 along with the two batteries to run a Titan X1. https://bhpho.to/3xogKW9

Q: 2. Does the battery come with a charger? I'm assuming no, but just want to confirm.

A: It does not come with a charger. You can get one here https://bhpho.to/3a1e1GF.

Q: 3. Can I use a Anker power bank with this charger? Or can I use the power bank to directly charge the BLS-50 battery directly in an Olympus OMD mark 5 iii?

A: The Olympus BCS-5 Lithium-Ion Battery Charger is 100-240 volts. It needs to be plugged into a wall outlet or plugged into an power inverter battery that has standard power of 100 -240volts.

Q: 4. Will this charger work with the om-d/EM 1?

A: No, this charger is not made for the OMD-EM1 battery. The OMD-EM1 use a different battery.

Q: 5. Can I use it with the charger that comes with the camera?Regards,Gaspar H.

A: The Olympus BLN-1 Rechargeable Lithium-ion Battery will charge in the charger that is included with the camera.

Q: 6. Will it work for GoPro 11?

A: The Watson Lithium-Ion Battery Pack for GoPro HERO9/10 Black (3.85V, 1720mAh) will work for the GoPro Hero 11.

Q: 7. Can this be charged with an Anton Bauer TM4 Logic Series?

A: Yes it should however we can not guarantee consistent results. Anton Bauer has firmware built into their batteries that talk to the chargers If you attempt to charge other batteries on the charger it may stop charging without warning. It is best to charge this battery via the included D-Tap charger.

Q: 8. Can I charge the Olympus-brand battery using a charger that I have for a Watson-brand battery?

A: If you have the correct battery plate, you can charge Olympus batteries in a Watson charger: https://www.bhphotovideo.com/c/product/888218-REG/watson_p_3512_battery_adapter_plate_for.html

Q: 9. Are you suppose to remove that tab at the top before using for the first time?

A: No it's there to help you pull the battery out of the camera.

Q: 10. How long will it power a CINEGEARS Ghost-Eye Wireless HDMI & SDI Video Receiver?

A: The Juicebox Lithium-Ion Battery with D-Tap Charger (95Wh, V-Mount) (B&H# JUJBVB95) could indeed be used to power V-mount battery plate equipped CINEGEARS wireless SDI and HDMI receivers. While there are several different such CINEGEARS models, they typically use about 10W of power and so could be expected to run for up to about nine hours on this battery. However, battery-powered run times will vary by model, settings, and conditions of use.