Bluetooth Audio Transmitter And Receiver Set

Product Code: eq26980
Availability: In Stock

$2,547.00 $3,540.33

Qty

2 reviews Write a review

Description
Reviews (2)

Operating at 72 MHz, the bluetooth audio transmitter and receiver setfrom bluetooth audio transmitter and receiver setcan be used in a variety of applications, broadcasting signal from your particular audio system to a belt-pack or stationary receiver. With its 80 dB signal-to-noise ratio, it provides intelligible audio across 57 selectable channels, all digitally tuned so that your transmissions won't drift. Up to eight channels can be used simultaneously on the 72 MHz frequency with multiple transmitters.

The transmitter's Look & Listen LCD displays channel, lock, programming, and RF power, while balanced and unbalanced inputs allow you to connect with a variety of audio sources. The transmitter is rack-mountable and features auto-processing to make the audio clearer for audible transmission. To make the unit easier to set up and install, a VU level meter and test tone generator are included.

Wireless Transmitter Operating at 72 MHz Unbalanced & Balanced Inputs Look & Listen LCD 100% Digital Tuning 57 Selectable Channels 80 dB Signal-to-Noise Ratio Auto Processor for Optimal Transmissions VU Level Meter & Test Tone

Audio
Frequency Response	50 Hz to 15 kHz (+/- 3 dB)
Signal to Noise Ratio (SNR)	SQ enabled 80 dB, SQ disabled 60 dB
System Distortion	<2% total harmonic distortion (THD) at 80% deviation
Input	Input 1: 1 x female XLR or 1/4" combo connector, balanced, 0 / -55 dBu (line/mic) nominal input level adjustable, -30 / +21 dBu (line/mic) maximum input level, impedance 20k / 1 kOhms (line/mic), phantom power 12 VDC - on rear panel Input 2: 2 x phono connectors, unbalanced, -10 / +10 dBu nominal input level adjustable, +30 dBu maximum, impedance 100 kOhms - on rear panel
Output	Audio: input 1 and input 2, mixed output (on rear panel), 2 x phono connectors, unbalanced, -10 dBu nominal output level, +19 dBu maximum, impedance 10 ohms Headphone: 1 x 3.5 mm stereo connector, unbalanced, adjustable output level, +7 dBu maximum, impedance 10 Ohms
Audio Processing	Compression can be turned on or off, slope internally adjustable from 1:1 to 4:1, default 2:1
Contour	Cuts and boosts frequencies above 5 kHz
Controls	User Controls: Power, up/down volume Programming: Via software and USB port
Controls/Indicators
Controls	User Controls: Front Panel: Power, test tone on/off, channel up/down, input levels, mix level, contour, monitor volume control Rear Panel: Input 1 Level, (line, mic, mic+phantom power), input 2 level (-10 / +10 dBu), RF power level (low, mid, high) Internal Adjustments: Compression ratio for audio processor Programming: SQ on/off, process on/off, channel lock
Indicators	Audio Input Status LEDs: Indicate input 1, input 2, and mix audio levels; 10 segment LEDs; 8 green, 2 red Processing: Indicated by a green LED when on (front panel) RF Power: Indicated on the LCD (low, mid, high) LCD: Channel designation, lock status, RF power level, programming (front panel) Test Tone: Red LED illuminates when test tone is enabled
RF System
Frequency Range	72.0250 to 75.9500 MHz
Number of Channels	17 wideband, 40 narrowband
Frequency Accuracy	+/- 0.005% stability 32 to 122ºF / 0 to 50ºC
Transmitter	Simultaneous transmitters: 8 Transmitter Stability: 50 PPM Transmission Range: Up to 1000' / 305 m
Output Power	80,000 uV at 3 m
Antenna Type	Various antennas available BNC connectors
Power
Power Supply	In-line power supply (part number LA-207)
Power Supply Input	100 to 240 V AC, 50 to 60 Hz, 0.4 A
Power Supply Output	12 VDC, 1.3 A, 15.6 W
Power Supply Connector	Barrel type: 0.02" / 5.0 mm OD 0.01" / 2.5 mm ID
General
Color	Dark gray with white silk screening
Environmental	Operation temperature: 14 to 104°F / -10 to 40°C Storage temperature: -4 to 122°F / -20 to 50°C Relative humidity: 0 to 95% relative humidity, non-condensing
Compliance	UL, CE, GS, TÜV, RoHS
Dimensions	1.75 x 8.5 x 9.13" / 4.5 x 21.5 x 23.0 cm
Weight	With power supply: 3.5 lb / 1.6 kg Unit weight: 2.60 lb / 1.2 kg
Packaging Info
Package Weight	3.805 lb
Box Dimensions (LxWxH)	13.4 x 9.85 x 3"

Audio quality of 80 dB signal-to-noise ratio (SNR)

57 selectable channels

100% digital: digitally-tuned so the transmission won't drift

Up to eight simultaneous channels on 72 MHz with multiple transmitters

Channel, lock, and programming information

Balanced/unbalanced inputs interface with any audio source on the market

Designed for installation: rack-mountable with optional remote antennas makes installation easy and service reliable

Auto Processor conditions the audio for voice or music prior to transmission

VU level meter and test tone - simply makes the installation easier to set up

Related Questions and Answers

Q: 1. Important question.. For how long can the unit operate continuously before it overheats?

A: B&H does not perform bench tests on products. According to manufacturer tests, the product has undergone testing that saw it running for over a week in standard operating conditions and no issues have been reported, including overheating.

Q: 2. Does it make any sound when pairing?

A: No, unfortunately the Aluratek AISM01F Bluetooth Audio Receiver would use it's LED to notify if pairing or connected.

Q: 3. what about latency?

A: My application is transmission of audio from the Denon AVR-2307 while watching TV and listening on Bose Bluetooth headphones. No latency has been observed.

Q: 4. Is it possible to use this in the headphone jack of a Scarlett solo 3rd gen to connect to a wireless headset?

A: Yes. The following unit has an onboard switch lets you choose whether the unit will transmit audio over Bluetooth to a Bluetooth-enabled speaker, headphone, or other device.

Q: 5. What is the latency? I need it for a subwoofer connection that needs to be in sync with the main speakers.

A: The Hosa IBT-402 is bluetooth 4.2, around 34ms.

Q: 6. Does it take headphone/microphone combo, for phone calls? Or does it only work with built-in mic?

A: The Aluratek AISM01F Bluetooth Audio Receiver would only function as a Headphone with no mic line in feature.

Q: 7. will it function while charging?

A: Yes, the Aluratek AISM01F Bluetooth Audio Receiver will function while charging.

Q: 8. Can you hook the transmitter to the headphone jack on a stereo receiver and stream from that receivers headphone jack to a Bluetooth headphone? Is the unit backwards compatible with all versions of Bluetooth?

A: Yes, you can use it with a headphone jack to transmit audio via Bluetooth to Bluetooth headphones, or speakers. Bluetooth Version 4.0 is backwards compatible.

Q: 9. Do I connect this to my computer to make it bluetooth enabled through USB port?

A: No, for Bluetooth audio you can connect this product to the computer's audio or headphone output. The USB connection on this device is to power the device itself.

Q: 10. Does this work with Apple AirPods?

A: No it will not works. the Apple AirPods will connect only with an iOS device.

William	28/07/2024
[3.805 lb] I bought the Alluratek to connect Bluetooth head phones and an audio amplifier to a TV that has only one optical audio port. The amplifier connection is through an external Bluetooth receiver. I havent used the Alluratek for connecting two receivers simultaneously. 5