Prevent leaks and keep your Nikon D800 camera safe in Aquatica's AD800 Underwater Housing with the SURVEYOR Moisture and Vacuum Sensor. This unit is sensitive to atmospheric pressure, and it allows you to confirm watertight integrity before diving. An included compensation function improves accuracy by ensuring that changes in ambient or internal temperature will not cause incorrect readings.

Once your camera is installed, simply push the actuation button on the sensor's circuit board. With the optional valve and extracting pump, which are part of the complete Vacuum Circuitry Kit, you can actually remove excess air to create a vacuum in the housing.

For Nikon D800 Camera    Confirm Watertight Integrity before Dive    Sensitive to Atmospheric Pressure    Audible Alarm and LED Indicators    Temperature Compensation for Accuracy    Use with Optional Vacuum Valve and Pump

• LED light will turn green for 2 seconds to confirm actuation
• Once a complete vacuum is achieved, the LED will blink in green again for 2 seconds
• During your dive, the LED will flash in green every 5 seconds, indicating system integrity
• If the pressure level is increasing but a vacuum has not yet been achieved, the LED will begin to flash in orange
• Should a slight loss in pressure be detected, the LED will start to flash in orange to warn you
• If your housing system is failing to maintain a vacuum, or the slightest amount of water has made contact with the sensor probes, an audible alarm will go off and the LED will also flash rapidly in red
• Advanced Aquatica circuit has temperature compensation included, so changes in ambient or internal temperature will not cause incorrect readings
• Onboard actuation button is for the vacuum only; your alarm is always on
• With the optional valve and extracting pump, which are part of the Vacuum Circuitry Kit, you can remove excess air to create a vacuum in your housing
• Housing can be purchased with this system pre-installed at the factory before shipment, in which case this one will serve as a spare or replacement
• If you purchased the housing without this kit initially, you can now add it on
• This SURVEYOR system may be used to replace the discontinued #20023 moisture alarm found in older housings

Related Questions and Answers

Q: 1. A D7100 Nikon camera with 18 - 105 67mm lens would fit in?

A: The Nikon D7100 with the 18-105mm lens will not fit in the Ewa-Marine U-FXP Underwater Housing. You could use the Ewa-Marine U-FXP Underwater Housing. You will also need the Ewa-Marine C-A67 67mm Adapter Ring Set. Here are the links: https://bhpho.to/2wbnd6W https://bhpho.to/2HkQrKX

Q: 2. Can you zoom in and out?

A: You have the ability by pressing the tubus to manually zoom in and out.

Q: 3. Will this work with a Canon 80d, Sigma 18-35mm f/1.8, and Yongnuo Transmitter (YN-E3-RT)?

A: This setup will fit in the u-az

Q: 4. Will this work with my D800e?

A: I have use it with a canon 5D Mk III and worked fine, I guess will work with the nikon. The size are similar in those cameras.

Q: 5. would a canon t3i rebel fit?

A: The Canon T3i will fit in the Ewa-Marine U-AX Housing. You do have to make sure the lens on the camera has a maximum filter thread of 72mm. The camera body and lens together cannot be longer than 6.7 (170mm). Only internal focus lenses could be used in Ewa-Marine housings.

Q: 6. Will a Nikon d7100, 18-140mm lens with a SB-700 flash fit?

A: this outfit will fit in the UBXP however if you have lenses with an 82 mm filter thread then you will require the U-BXP 100.

Q: 7. What's the maximum focal can be used without vignette ? My gear is Sony A7RII and FE1635

A: Hi Dziung, there will always be vignetting of some sort while shooting underwater, but the limits on lenses in this housing are really the filter thread size (max is 82 mm) we recommend the widest possible settings to be used and framing where crops are possible.Hope this helps.All the best,Eric

Q: 8. enough room to fit a pocket wizard on the hot shoe?

A: Hi Steve,i havent tested the pocket wizard but i have seen other remotes on a hot shoe fit without issue. Eric

Q: 9. does this housing supposed to come with some padding?

A: This underwater housing bag does not come with padding.

Q: 10. I'm looking for underwater housing that would accommodate my Canon 5D III, battery grip, 600EX flash and a 77mm lens (ideally up to 82mm). What reliable options would you recommend for this setup, without breaking the bank?

A: Ewa-Marine bag housings are a reliable option at a reasonable price when working in 20' of water or less. The housing is rated to 150' but water pressure will make it difficult to access the camera controls through the bag. The Ewa-Marine U-BXP100 is their largest housing. This bag is designed to hold an on-camera speedlight and could accommodate internal focus lenses with a maximum 82mm lens filter size. The housing includes the threaded 77mm lens-to-port adapter ring. Other optional port adapter rings including the 82mm adapter is available (#CA82). Wide-angle lenses can be used with this housing.The housing is designed for large DSLR cameras only. Use of a battery grip cannot be guaranteed. Here is the link: a href= http://www.bhphotovideo.com/c/product/464106-REG/Ewa_Marine_EM_U_BXP100_U_BXP100_Underwater_Housing.html target= _blank http://www.bhphotovideo.com/c/product/464106-REG/Ewa_Marine_EM_U_BXP100_U_BXP100_Underwater_Housing.html/a