The 220V electric motorized wall ceiling projector screen(fabric, roller, and motor available separately) from electric motorized wall ceiling projector screenintegrates an HD camera into the screen, and is compatible with any free peer-to-peer video conferencing software.

Designed to eliminate the extra step of finishing the screen with trim, the screen features ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening, eliminating the need to complete additional trim work. Sliding installation brackets are provided to make it easy to attach the screen housing to the structure above the drop ceiling.

The ViewShare system screen features simple ceiling-tile installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

electric motorized wall ceiling projector screenThis box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 24027EFL.

119" Diagonal / 16:9 Aspect Ratio    Pearlescent Surface    1.5 Gain / 80° Viewing Angle    Slim-Tab Tensioning System    Box Only (No Screen Fabric)    Jabra SPEAK 410 MS Speakerphone    Integrated HD Webcam    Low Voltage Control (LVC)

Pearlescent offers a higher amount of reflectivity than unity-gain Da-Mat finish, and is designed for use in applications where moderate viewing angles are required. This surface is a good choice when producing video images with a lower output projector or where there is a high amount of ambient light present. Cone: 80° Gain: 1.5

• Simple installation with the included installation kit
• UL Plenum rated case
• White powder-coated case for a clean aesthetic
• Standard black backing retains projected brightness on front projection surfaces
• Seamless screen surface

Related Questions and Answers

Q: 1. Does the part that attaches the projector allow for tilting, too? I know the part that attaches to the ceiling tilts. My projector screen is close to the floor and I am wondering if I can tilt the projector so that it will project onto a low screen.

A: The Kanto Living P301 Slanted Ceiling Projector Mount (B&H # KAP301) has a 90° pivot point that allows for 20° of tilt once a projector is mounted. The point at which the projector attaches, however, is fixed. To project onto a low screen, you may have to angle this mount slightly downwards, then use your projector's keystone functionality to correct any image distortion.

Q: 2. How high does the stand put the screen? From the floor / base also width to include the frame to top of screen & side to side what are those dimensions?

A: The KHOMO GEAR Portable Projector Screen (51 x 92") BH #KHGER1153 when fully built is approximately 92" wide x 84" high

Q: 3. How heavy is it

A: The KHOMO GEAR Jumbo Inflatable Projector Screen (8 x 13') BH #KHGER1161: Packaging Info: Package Weight 29 lb Box Dimensions (LxWxH) 24 x 15.6 x 15.5"

Q: 4. what is the distance between the holes for mounting to the ceiling? in other words, not on the extension arms but on the plate?

A: The Kanto Living P101 Ceiling Projector Mount (White) BH #KAP101W ceiling mounting holes are spaced 4.3" apart on-center (length) and 2.4" apart on-center (width).

Q: 5. what is the spread on the spider arms?

A: The SANUS VMPR1b VisionMount Universal Projector Ceiling Mount - Black BH #SAVMPR1B is compatible with thousands of projectors, but the arm measurement is not specified.Sanus claims: " Versatile mount design is compatible with more than 95% of all DLP and LCD projectors on the market."

Q: 6. Would this work as a projector mount for an 8lb projector?

A: No it would not.

Q: 7. Does this kit come with 2 brackets?

A: The Electro-Voice MB200W comes with only 1x bracket.

Q: 8. Is the mount white or black?

A: White

Q: 9. What's the actual size of this screen? 100" or 130"?

A: The KHOMO GEAR Jumbo Inflatable Projector Screen (8 x 13') BH #KHGER1161 is: Dimensions: Viewing Area: 8.0 x 13.0' / 2.4 x 4.0 m Diagonal: 15.5' / 4.7 m Overall HxW: 10.5 x 16.0' / 3.2 x 4.9 m

Q: 10. Do you have to install extra wood behind the drywall/ceiling due to the x-brace being much smaller than the span of two joists?

A: Yes. it is recommended that a cross piece is added, to be attached to each joists and 3/4" plywood be used as well as "blocking" to be used to attach the ceiling mount securely.