The 58 x 104" Da-Lite Tensioned Cosmopolitan Projection Screen 58"x104"from Da-Lite Tensioned Cosmopolitan Projection Screen 58"x104"is ideal for applications where a recessed installation is not desired or feasible. The tab guide cable system maintains even lateral tension to hold the surface flat, while the custom slat bar with added weight maintains vertical tension. Its handsome black textured case blends with any decor.

Wall or Ceiling Mount    Tab-Tensioned    119" Diagonal    HDTV Format    16:9 Aspect Ratio    Front or Rear Projection    Dual Vision Finish    120V, 60Hz

Same features as Cosmopolitan Electrol but with Tab-Tensioned system

Handsome black textured case blends with any decor

All fabrics are seamless

Optional floating mounting bracket allows screen to be mounted onto a wall or ceiling studs and aligned left or right after installation by releasing two sets of screws

Related Questions and Answers

Q: 1. Do you need the optional wall mount brackets to install this screen to the wall?

A: You do not need extra wall brackets. The screen comes with a ring hook on each end to hang.

Q: 2. Does the 69 x 110" dimension refer to the screen size or the frame size?

A: The Da-Lite 34689V Da-Snap Projection Screen (69 x 110") BH #DA34689V viewable dimensions are listed as 69" x 110". The overall dimensions are 72" x 113".

Q: 3. Can this screen be used for a 16:9 image or does it have to be 4:3?

A: It is made for a 4:3 ratio. If using 16:9, you would not be able to fill the screen. Also picture being smaller.

Q: 4. What is the total width needed to mount this screen. All I see is the screen width, but not the entire width including encasement

A: Per page 5 of the manual, the housing for Da-Lite's Large Cosmopolitan Electrol extends about 4" out from the edges of the screen on either side. The Da-Lite 40823 Large Cosmopolitan Electrol 12 x 12' Motorized Screen (120V), B&H # DACE1212MW, would require an absolute minimum of 152" of horizontal space, but I would recommend having at least 160" of horizontal space.

Q: 5. Can this screen be ceiling recessed?

A: This is made for wall or ceiling mounting. Please email AskBH@a href= http://BHPhoto.com target= _blank BHPhoto.com/a for a recommendation on a similar ceiling recessed model.

Q: 6. After almost a year of once a week operation at our church the screen stopped all movement. An electrician was able to lower it for use by bypassing the box with a low voltage feed . What is needed to restore normal operation??

A: Da-Lite provides a one year limited warranty. They should be able to repair or replace it for you. Please contact Da-Lite.

Q: 7. Is this screen suitable for outdoor use?

A: The screen is made for indoor wall or ceiling mounted use.

Q: 8. what is the diagonal dim?

A: Viewable Diagonal inches.: 339

Q: 9. I am looking for a screen to fill a 9 x 14 space. This looks like a great option but want to be sure I can pull it down only partially and still have it lock in place?

A: To Open Screen Protect Your Screen To Re-Roll Your Picture Surface The Model C operates on the same principle as a window shade. Pull down about 4 inches to disengage the locking dog and start the fabric up firmly and quickly. Large picture surfaces are heavy and will start up too slowly to prevent the locking dog from catching unless help is provided, so keep picture surface moving briskly. Should the locking dog catch, pull the picture surface down about 4 inches and start the surface up rapidly. However, do not permit the picture surface to roll up uncontrolled, particularly the last few feet. Allowing the bottom slat to strike the case uncontrolled may result in severe damage to your screen. Use the cord provided for control.

Q: 10. Is this screen is matte white?

A: No. It is an HD Progressive 1.1 Screen Surface: Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction. Cone: 170° Gain: 1.1