The 47.2" long konova camera slider stability armsupports loads up to 44 lb and features roller bearings that provide smooth, stable, and quiet operation. The slider can be supported using a single tripod or a pair of tripods/stands, thanks to the 1/4"-20 threads located on the underside of the track positioned along the center and at either end. Additionally, there are threaded holes at the sides of the slider that enable you to mount it vertically, for expanded creative possibilities. For ground-level shooting, a pair of height and angle-adjustable legs with rubber ball feet are included that screw into the sides of the slider.

The slider carriage features 3/8"-16 threads for attaching a fluid head or ball head, and also 1/4"-20 threaded holes on the underside for accessory mounting. The resistance of the carriage can be quickly set to taste by using a red friction knob, or finely tuned with more finesse using an included wrench for tension adjustment. A metric ruler running the length of the slider makes it easy to perform precise and repeatable camera movements. Should you wish to expand the system in the future, you can choose to add an optional crank handle kit or one of the motion controller options.

Roller Bearing Sliding System    Load Capacity of 44 lb    Track Length of 47.2"    Tension-Adjustable Ball Bearings    Friction-Adjustable Knob    Tie-Down 3/8"-16 Screw    Detachable Legs with Rubber Ball Feet    Ruler for Precise & Repeatable Moves    Dual Oil Seals for Cleaning Rails    Carrying Bag

• 44 lb Load capacity
• Four steel bearings provide smooth, stable, and quiet operation
• 6mm Steel rails
• Camera carriage with 3/8"-16 screw and two 1/4"-20 threaded holes
• Friction adjustment knob
• Bearing tension is adjustable using included wrench
• 1/4"-20 and 3/8"-16 Mounting threads at center and ends of tripods
• Mounting threads on side of tripod for vertical mounting
• Detachable height and angle-adjustable legs with rubber ball feet
• Metric ruler for repeatable movements
• 1/4"-20 Accessory mounting threads at each end of slider
• Dual oil seals to help keep rails clean from dust and debris
• Bubble level
• Carrying bag
• Optional crank handle and motion control upgrade kits

Related Questions and Answers

Q: 1. How many pounds is payload of the Konova S900? Does it works with BM Ursa 4.6K ?

A: The Konova S900 SUNJIB Mini-Jib Crane has a payload of 44 lbs/19.95 kg. It can easily handle the Blackmagic Design URSA Mini Pro which bare weighs 5.1 lbs. Fully built it, would be anywhere from 10 lbs to 25 lbs. Add the weight of the video head and you still should be well under the 44 lbs payload of this crane. Just be sure your tripod is rated to handle 50 lbs or more.

Q: 2. I'm sure this will sound like an odd question, but can you please tell me the length of the weight bar?Just to clarify, I'm look specifically for the length of the weight bar and not the length of the jib arm.In advance, thank you very much for your help with this question!

A: The length of the weight bar is 35 cm.

Q: 3. Does this slider comes with the head?

A: No. You need to buy.

Q: 4. I'm sure this will sound like an odd question, but can you please tell me the length of the weight bar?Just to clarify, I'm look specifically for the length of the weight bar and not the length of the jib arm.In advance, thank you very much for your help with this question!

A: The length of the weight bar is 35 cm according to Konovo.

Q: 5. Is there a memory feature for this slider?

A: No, there are no memory features listed for this slider.

Q: 6. Is there a version of this setup(carbon) but with the 42 model?

A: Unfortunately, there is no Rhino 42 flywheel slider with carbon rails. There is however, a Rhino 42 flywheel slider with steel rails kit that includes a 24 carbon slider. Rhino Studio Slider Bundle B&H # RHSSB

Q: 7. Does this slider require the motor and belt to be taken off the slider in order to put it in the case?

A: Yes, it does require for product to be in proper slots.

Q: 8. can it be used in a tripod/?

A: All sliders, including this one, are made to attach to tripods or stands in a variety of ways.

Q: 9. What is the maximum camera and lens weight the slider can handle to operate smoothly?

A: The Konova P1 Carbon Slider with KMS-S3 Wireless Motorized System has a support weight of up to 17lb payload weight to operate. You would want to be under this weight to have it run smoothly. horizontal payload: 8kg (17lbs), diagonal payload: 3kg (6.6lbs), vertical payload: 1kg (2.2lbs).

Q: 10. Does B&H sell a soft "portable" case for this slider?

A: We offer the Rhino Camera Gear Slider EVO Carrying Case (42") BH #RHCC42