The elation midicon lighting midi controllerfrom elation midicon lighting midi controllerfeatures 9 touch-sensitive, motorized faders, 41 classic tactile keyboard keys, and 4 precise custom-weighted aluminum encoder wheels with push-in selection function, all with adjustable LED backlighting, and a leather-bound palm pad. Standard 5-pin MIDI in/out and a USB 2.0 Type-B input connection are also onboard, as is an internal 100-240 VAC auto-switching power supply.

Touch-Sensitive Playback Faders    19-Key Numeric Keypad    5-Pin MIDI In/Out Ports    USB 2.0 Type "B" Port    26x Shortcut Keys    4x Aluminum Encoder Wheels    Blackout Button    2x Page Control Keys    Leather-Bound Palm Pad

Related Questions and Answers

Q: 1. Is this compatible with Davinci Resolve's Fairlight page?

A: Yes, the Korg nanoKONTROL Studio Mobile MIDI Controller is compatible for use with Blackmagic Design DaVinci Resolve software on the Fairlight page.

Q: 2. Will this work with a Chauvet DJ DMX-4LED 4-Channel Dimmer Pack?

A: Yes. If the lights you own do not have built-in DMX, then you may use the CHAUVET DJ DMX-4LED 4-Channel Dimmer Pack with the Elation Professional SDC12 12-Channel Basic DMX Controller for your usage needs, allowing you to adjust the light output from the ground.

Q: 3. Do the knobs stop or can they rotate continuously?

A: The knobs on the Korg nanoKONTROL Studio Mobile MIDI Controller have a defined value of 0-127 MIDI Control Change, they do not endlessly rotate.

Q: 4. Can the knobs control gain on a mixpre 10?

A: Yes, but the MixPre must have the required firmware update. The Sound Devices v3.00 firmware update for the MixPre-3, -3M, -6, -6M, -10M, and -10T provides support for third-party USB control surfaces such as the Korg nanoKONTROL Studio and nanoKONTROL2, Akai MIDImix, and Novation Launch Control XL. This update enables connection of these control surfaces to the MixPre to control trim (gain), faders, pan, low cut, reverb, record, stop, and more.

Q: 5. Im new to DMX controllers. How does this control multiple lights with only one or two outputs?

A: The idea with DMX512 is to have one cable run (from controller into first light and out from 1st light into second light and out of second into 3rd etc. So that would explain the single output. The SDC12 is used for very basic either testing of units or simple manual control over the fixtures via the faders essentially sending a signal to lights from0-100% activating the features of the light being controlled. If used with an RGB color mixing pars in 3 channel mode fader one for example would dim the R or red channel from 0-100% the second fader would control Green and third control Blue allowing you to mix these colors producing different colors mixing the colors at different levels. For a programmable controller you may want to look at the ADJ DMX Operator. I hope this helps?

Q: 6. Is this unit comparable to the Korg MC-1?

A: The nanoKontrol Studio offers similar functionality to the encoders on the MC-1, however is tailored more toward DAW program control with transport control and dedicated mute, solo and record arm buttons.

Q: 7. If I turn off this console, will the connected lights turn off as well?

A: depending on the fixtures and if they have a look store or a when dmx is lost feature, i use them all the time its a great console

Q: 8. Do the batteries charge while unit is connected via usb?

A: No, the nanoKONTROL Studio uses two standard AAA batteries. You can use rechargeable batteries but you will need to remove the batteries to charge them using a separate battery charger. USB cannot be used to charge batteries while they are inside the unit. However, USB can be used to power the nanoKONTROL Studio instead of using batteries.

Q: 9. Does this Keytar come with a strap?

A: Yes, the Alesis Vortex Wireless 2 USB / MIDI Keytar Controller comes with a strap.

Q: 10. Can both dmx outputs be used at the same time? JJ

A: No, only use one dmx output at a time on the Elation Professional SDC12 12-Channel Basic DMX Controller