Patterns, or gobos, are widely used by designers in theatre, film, photography and television to create atmosphere, project scenery, and generally enhance the visual impact of their lighting.

Conceived by some of the world's leading lighting designers, the Rosco range presently includes hundreds of standard steel gobo designs.

To insure design integrity the patterns are etched using a precise double-sided process on stainless steel. The result is durable, high quality patterns which will withstand the extreme heat at the gate of ellipsoidal spotlights.

Rosco steel gobos are round to allow for rotation in the gate when aligning the projected image.

The standard "B" size is suitable for most fixtures with a 6" lens when used with a Rosco Pattern Holder or the holders of other manufacturers.

Trimming of patterns, where necessary, can be easily accomplished with a pair of scissors.

Related Questions and Answers

Q: 1. Will this trim a 13x19" sheet of photo paper to 12 x18"?

A: You will have trouble trimming 13" to 12". The Falcon Marshall can only cut up to 14". When you rotate the paper, you will only be able to trim one inch off that side, since you can only reach 14" on the long edge.

Q: 2. Does these fits Aputure Spotlight Mount Set with 36° Lens?

A: Yes, you can use Godox Gobo Set VSA-GS4 for Aputure Spotlight Mount Set with 36° Lens due to the same size that it uses for gobo 3.4".

Q: 3. What size are the gobos that fit in the projector? 1 ?

A: 26.8mm

Q: 4. Does anyone have experience using this? I am curios if the mount has any play after pinned into place, will the monitor wiggle at all? The pin looks like it will hold the monitor in its locked position but does it do this without play?

A: Yes. Please contact our live chat team for more support.

Q: 5. How far should the ridged top lift in order to remove the blade? Mine is only about 45' open and the blade isn't accessible. I'm afraid that the blade has shifted and is causing it to not be accessible. I would love to see a video of this process. I love this cutter, but need to replace the blade!

A: I would recommend contacting Falcon; Falcon (Marshall)Distributed By - Omega BrandessTel: (410) 374-3250 Website http://www.omegabrandess.com/ Email customerservice@omegabrandess.com

Q: 6. I would like to know how to change the images (projections) is there a screen that comes with it so i can print my logo, cut it and set on the projector ?

A: Rosco offers a custom gobo service. https://bhpho.to/2sLiJY2

Q: 7. Does this come with any fog fluid?

A: It does not

Q: 8. Does this fit b-size gobos?

A: No. The following unit adapts to gobo size 26.8mm

Q: 9. How far should I mount it away from the wall with a good brightness?

A: The manufacturer does not list a specific distance at which the American DJ Gobo Projector IR should be placed. However, thy do state that at a distance of 3 meters (or 9 feet 10 inches), the LUX output power 9brightness) would be approximately 540 Lux.

Q: 10. Is the inside 1-3/8" in diameter? If not, is any part of it 1-3/8" in diameter?

A: The diameter of the Ultimate Support 13763 Pole Size Adapter is 1.5" (38 mm) to fit on the Ultimate Support TS-80B, TS-80S, TS-88B, TS-90B, TS-99B, TS-99BL, TS-100B, TS-110B, and TS-110BL speaker stands and adapter them to accommodate the 1-3/8" (35 mm) pole cups that are commonly used on many speakers.