The 220V make a motorized projector screenfrom make a motorized projector screenenables you to upgrade an existing Advantage Electrol screen by adding ViewShare video conferencing features. It includes a new fabric, motor, and roller assembly. It also comes with an integrated Logitech C930e HD Webcam installed in the slat bar, and a Jabra SPEAK 410 MS Speakerphone. The screen features tensioning to ensure the smoothest possible surface.

94" Diagonal / 16:10 Aspect Ratio    High Contrast Da-Mat Screen Surface    0.8 Gain / 90° Viewing Angle    For Screens with Type 2 Motor    Integrated Webcam and Speakerphone    Tab-Tensioned Screen Surface    Smooth Roll Technology

High Contrast Da-Mat is a vinyl surface that features a dark gray base for deeper reproductions of black, which improves the perception of contrast. This surface works best in environments with a high-output projector and controlled ambient light. Cone: 90° Gain: 0.8

This retrofit is for the Type 2 Motor. The Type 2 Motor is identified by a 3-wire connector, does not have manual limit adjustments, and features an RJ-22 cable

• The auto-focusing camera is integrated into the slat bar
• Plug-and-play connectivity
• Full HD 1080p video calling (up to 1920 x 1080 pixels); 720p HD video calling (up to 1280 x 720 pixels) with supported clients
• H.264/SVC video compression
• Supports H.264 SVC 1080p for Microsoft Lync 2013, along with optimizations for call performance in single or multiparty HD video
• 90° field of view
• Up to 4X zoom in 1080p
• Rightlight 2 Technology for clear image in various lighting environments, even low light
• Optional light application for control of pan, tilt and zoom
• Carl Zeiss lens
• External privacy shutter
• Automatic low-light correction
• High-speed USB 2.0 certified (ready for USB 3.0)
• System requirements: Windows 7 or 8 / Mac OS X 10.7 or higher
• 2.4 GHz Intel Core 2 Duo processor
• 2GB of RAM
• Adequate hard drive space for recorded videos
• USB 2.0 port
• Compatible with UVC apps, and H/264 for Lync 2013. Optimized for Lync and Skype

• Connects via USB
• Requires 120 VAC power (AC adapter included)
• Microsoft certified
• Wideband hi-fi frequency response
• Includes digital signal processing, which digitally optimizes your voice and music while suppressing echoes
• Omnidirectional microphone and noise filter enhances call clarity by eliminating background noise
• Standard (E-STD) microphone sensitivity is comparable to a normal telephone receiver and is used in most telephone devices
• Mute function directly on the device

• Standard Silent Drive System to keep your screen whisper quiet
• Standard Low Voltage Control (LVC) to keep your screen operation flexible
• Smooth Roll Technology to keep your screen flat
• Slim-Tab, a lower profile and stronger tab design to keep your screen taut
• Standard black backing retains projected brightness
• Seamless screen surface

Related Questions and Answers

Q: 1. Can this be used for developing black and white paper prints?

A: While technically film developer can be used to develop prints, its concentration/strength is significantly weaker and you would get very different developing times, contrast, etc. Your mileage may vary. It's best to stick to the appropriate developer for best results.

Q: 2. is this 1:4 used for film?

A: Yes, this Kodak Professional Fixer can be used for black and white film development at a 1:3 dilution.

Q: 3. Do you mix rhe powder at room temperature?

A: Yes, you mix the Arista Premium Odorless Powder Fixer (To Make 1 gal) BH #AR4086 in room temperature.

Q: 4. Which fixer to use for this developer? Suggest the most affordable and powder only please?

A: CineStill makes the CineStill Film F96 B&W+Bleach-Bypass Rapid Fixer (To Make 1L). This is a good option to use with this Developer. Here is a link to this on our site. https://bhpho.to/3tBG6xI

Q: 5. How does it differ from the fixer that it replaced?

A: Hi--no changes were made to the product, but the packaging and wholesale arrangements were changed slightly.

Q: 6. Once mixed how long does this solution last?

A: The official shelf life for Kodak Professional D-76 Film Developer in liquid form is 6 months in a closed bottle; it is usually good for a bit longer than that.

Q: 7. Can you share the lifecycle status of this product? Is there risk that this product will become obsolete?

A: Depending on storage conditions fixer should last for about 2-3 years after mixing.

Q: 8. Is it safe to purchase Dektol again? Or is there still something wrong with it?

A: According to Kodak, there is no issue with using the currently-available Dektol developer. In an official statement from Kodak, they state that "Dektol batches with date codes of August 2019 or lager will exhibit a dark brown solution when mixed. However, image quality is unaffected - the color is due to an impurity which is no photo-active. Our manufacturing as well as an outside lab have tested the dark colored Dektol batches: Sensitometry Dmax, Dmin, paper speed, and image tone match the Dektol standard. We are working on the source of the impurity so we can get the appearance back to normal." Other than the color of the solution, there is no difference to the solution's performance.

Q: 9. What is the recommended temperature for storing? Can I just left this chemicals in the storage room?

A: Hi, in this powdered form, you should keep it in a cool, dry place, but the temperature is not critical.From 50 to 70 degrees F is fine.

Q: 10. Do you have to mix the whole gallon at one time? Should it all be mixed at one time? How long does the developer last mixed up in a gallon jug? When you use it for 1 print developing session, do you throw out the developer that you just used?

A: Kodak recommends that you mix the entire package due to the fact that the different dry chemicals will separate and stratify in the package due to shipping. Once the stock solution is mixed with water it will keep up to 6 months in a full tightly sealed container. You can keep multiple smaller containers of the stock solution if you desire, again they should be full and tightly capped.Regarding a printing session, Kodak states a capacity of 120 8x10 prints per gallon of 1:2 dilution developer. Most people never attempt to use it to full capacity since the developer is cheap and it can be difficult to detect when the developer is becoming exhausted. You may mistake exhausted developer for insufficient exposure or contrast. If your a hobbyist then use it for something less and replace. I personally use it to 50 to 75 percent of capacity and never more that two printing session due to concern of extended exposure to the air / oxidation.